AutoCad 2D :: Draw A Line That STARTS At Perpendicular Angle To Another Line
Jun 27, 2012How to draw a line that STARTS at a perpendicular angle to another line ???
View 4 Replies
ADVERTISEMENT
AutoCAD Architecture :: How To Draw Line In Particular Angle From Another Line
Apr 13, 2013I don’t know if there is some way to draw, or somehow to say to AutoCad that it let me to input measurements from line but not from main base pint.
For example in Revit I can make angular dimension between lines and then apply any angle that I want, maybe AutoCad has such tool?
AutoCAD 2010 :: How To Draw A Line Perpendicular On Arc At Particular Point
Apr 21, 2012How to draw a line perpendicular on an arc at the a particular point?
I wanted to draw a line perpendicular to an arc at a particular point but couldn’t approach it. In this case, I need two snaps to work at the same time! To be perpendicular on the curve and at the same time to be snapped to the point!
AutoCad 2D :: Draw Perpendicular From A Line / Object At Specific Point
Feb 24, 2010How do I draw perpendicular from a line or object at a specific point? I know by holding shift and osnap perpendicular I can draw the line but I can not osnap to the exact point!
View 9 Replies View RelatedIllustrator :: How To Draw A Line Perpendicular To The Curve At Particular Point
Apr 24, 2010I have a curved path I imported into Illustrator, and I'd like to draw a line perpendicular to the curve at a particular point. I've searched google and this forum, but can't find any description of how to do it. Corel Draw has a button that lets you do this, so I'm hoping something similar exists in Illustrator...
i'm currently just calculating the angle at the point I want using the derivative, finding the angle, and then adding 90 degrees to it. But I need the line to be placed at a particular point, and the X/Y properties of the line are based on the ruler which isn't even in the center of the document (I want to position it relative to the artboard). As in, I just want to set the position of one endpoint of the line...
Illustrator :: Shortcut To Draw A 45 Or 90 Degree Angle From Drawn Line On Angle?
Nov 13, 2013Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
AutoCad :: Draw Line With Given Angle At The End?
May 3, 2012How to draw a line with given angle at the end? What is the command?
View 4 Replies View RelatedAutoCad 2D :: How To Draw Line At Specific Angle
Oct 12, 2008How do i draw line at specific angle. if i have the length on the x axis and angle, when i do @.25<45 the line becomes .25 in length i need the x dim to be .25 @ 45 degrees. as shown in the picture
View 9 Replies View RelatedAutoCad :: Draw Angle Using Multi-line Command
Nov 6, 2013Is it possible to draw an angle (eg 50x50) using the multi line command with the internal & external corners of the multi line angle radius?
View 5 Replies View RelatedAutoCAD Civil 3D :: Perpendicular Line From Point Laying On A Line / Pline
Sep 30, 2013 I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
AutoCAD 2010 :: Draw A Line Without Length / Angle Showing As To Go?
Feb 15, 2012How do you draw a line without the line length/angle showing as to go?
View 6 Replies View RelatedAutoCAD 2010 :: Most Efficient Way To Draw A Line Inclined By Particular Angle?
Apr 17, 2012What is the most efficient way to draw a line inclined by particular angle from another line?
I wanted to draw a line inclined by particular angle from another line but couldn’t get the best way to do that.
For example, in the screenshot below, I wanted to draw a line inclined by 60º from an existing line but couldn’t approach the best way to approach it.
How can I draw this line efficiently?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
AutoCad 2D :: Draw Line Snapped To 45 Degrees Angle Of Circle Block
Aug 15, 2011good way to start a line at one of the 45 degree angles of a circle block?
View 9 Replies View RelatedAutoCad :: Line Perpendicular Off Another Line
Aug 7, 2013Is there a simple way for drawing lines or plines perpendicular off a given line which is not horizontal or perpendicular itself?
Bildschirmfoto 2013-08-07 um 14.30.17.jpg
Is there a way for drawing that yellow line in the drawing with a given length directly off the ending of the white line? Without using SNAPANG or the like?
AutoCad 2D :: Perpendicular Line From A Line
Nov 2, 2012I have a drawn a line at any angle say 39.43. I want to draw a line from this line @ perpendicular from this line. How to draw this.
View 9 Replies View RelatedAutoCad :: How To Make Third Line Relative To Second Line So Angle Is 75 Degrees And A Certain Length
Oct 27, 2009I have been practicing using a older book(copyright 1990) and it has some decent exercises in it. I was able to do this one but it seems I can"t find the proper way to do this..First drawing a line a certain distance..ortho on,click the first point anywhere,move curser to the left and click again. that gives me a line at 180 degrees at what ever length..Line command again starting at the second point of the first line..after clicking that point,I type in @2.38<150 that gives me a line2.38 long at 150 degrees..now how do i make a third line relative to the second line so that the angle is 75 degrees and a certain length..the picture shows what I am trying to draw..using the polar cordinates you get an angle based off the UCS( which is set at world) when you try to draw the third line ..that makes the angle between line 2 an 3 not the angle that I want..To make the drawing,I rotated the ucs -30 degrees..But there has to be a better way than that..
View 9 Replies View RelatedAutoCad :: Drawing Bottom Line With Angle Of 132 Relative To Middle Line
May 15, 2013angle.jpg
How can I draw the bottom line, with an angle of 132 relative to the middle line?
AutoCad :: Drawing A Line At Angle With Another Line As X Axis?
Oct 22, 2011I have to draw a rather weird drawing with a lot of angled lines. Currently I'm using UCS to draw them but it's really tiresome.
I would draw 1 line, then type in UCS, select the X and Y axis, draw that line, escape, then hit in UCS again, rinse and repeat.
Is there a simpler way? I tried polar tracking "relative to last segment" but it still uses the x axis as the base, which is not what I want. I want the line to be the X axis.
AutoCAD Inventor :: Cursor Change To Draw Line But Line Doesn't Appear
Dec 5, 2011I have a problem with a recently downloaded version of Inventor. When I start a new drawing all I get is a blank blue screen instead of one with a grid display. If I start a line I can see the cursor change to draw the line but a line does not appear. I don't know if it something with how I installed the program or just system settings.
View 2 Replies View RelatedAutoCad :: Draw Straight Line Without Protractor Shaped Dotted Line / Unable To Set User Interface
Jan 22, 2012How can I draw a straight line without that protractor shaped dotted line following my cursor making it lag and also not snap correctly to the next line? Also, I have noticed that I can't set my user interface to auto cad classic settings. There seems to be no option for it in workspace settings.
View 3 Replies View RelatedAutoCad :: How To Use Offset Commend To Draw A Parallel Line To Another Line
Sep 14, 2011in autocad we use offset commend to draw a parallel line to another line what we should we use in Chief Architect x2
View 1 Replies View RelatedAutoCAD 2013 :: Draw A Line From End Of Line To Start
Jul 31, 2013I was drawing a lot of lines with the pointer that stuck at the end of the line and after that it stuck at the beginning of the other line (i hope you understand what i mean). I don't know what i pressed but now this function is not active and is very difficult to draw the lines.
View 3 Replies View RelatedAutoCad :: How To Read Angle Of Line And Insert Block To That Angle
Feb 11, 2011Let's say I am inserting a square block into a dwg and want to get it parallel to an existing angled line. Do I have to read the angle of the line and insert the block to that angle or is there a quicker way?
View 6 Replies View RelatedIllustrator :: Line Segment Tool Does Not Allow To Draw Horizontal Line?
Oct 18, 2012I must have pushed one or the other button but I don't know which one!
I use CS5 and have now a small arrow on my line segment tool (as shown in the picutres):
Ever since that when i click shift, it just allows me to draw vertical lines, rather than vertical or horizontal.
AutoCAD VB :: Drawing Perpendicular From Point To Line?
May 17, 2009I have a line which is at (0,0) and (2,2). I need to draw a perpendicular to this line from point(1,0).
View 6 Replies View RelatedAutoCAD 2010 :: Drawing A Line Perpendicular To An Arc?
Sep 21, 2011Recently I've been working with a lot more projects that contain curved architectural features. It appears that I am unable to draw a line to an implied perpendicular point on an arc. I can draw a line to an implied point perpendicular to another line but not an arc. refer to attached images.
Image1 demonstrates the implied point perpendicular to a line.
Image2 demonstrates that there is no implied perpendiuclar point on the arc given by AutoCAD.
Image3 demonstrates that if the arc is manually extended, a point perpendicular to the arc does exist.
It seems like this should work.
Image1
Image2
Image3
AutoCad :: How To Make Circle Perpendicular To Line
Feb 8, 2011I am trying to make a circle perpendicular (at its midpoint) to the end of a cylindrical helix in 3D space. I tried using the perpendicular geometric constraint but it won't let me (says "invalid selection"...). Is there a way to make the ucs (z axis) tangential to the end of the helix?
View 4 Replies View RelatedIllustrator :: Erases First Line After Draw Another One Close To The First Line
Dec 26, 2013when I (try to ) use Pencil and Brush tools, (cross-hatching), some lines get erased/replaced by the lines drawn close to them. It must have something to do with the preferences, but I am not sure what to change/adjust.
View 2 Replies View RelatedPhotoshop :: Draw A Line Using The Line Tool
Jul 26, 20051. if i draw a line using the line tool.. can i curve it to say 40 degrees like i can with the text function?
2. So ya that one was easy.. hows bout when i want to cut something out ACCURATELY, the pen function, right? (according to a friend)when i make all those little boxes and select the area i want to cut, all that gets copied are the outer lines, which i presume is what ive just drawn.. how do i cut the area inside this?
3. and finally maybe a slightly less easy one- In Paint, when you cut out an object and paste it, you can select for the white of the image to become transparent so you can paste over what you have already.. is thee a feature in PS for this?
AutoCad :: Make A Lintype Where Line Starts / Ends With A Point
Nov 2, 2012I want to make a lintype where line starts with a point and ends with the point and in between is continuous line. Space from points to line should be 1 or 0.5 units depending on the scale I want to plot my drawing in.
View 7 Replies View RelatedAutoCad 2D :: How To Break Multiple Lines At Single Point Without A Gap Along A Perpendicular Line
Apr 5, 2011Is it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View Related
