I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 RepliesI have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
Who can tell me if Break lines in Inventor 2012 will be constrainable? I mean come on... All the new fancy stuff Inventor gets every year is great but when will the simple things get done?
View 9 Replies View RelatedAny trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies View RelatedWhere can I change the default gap value in the initial display of the Broken View dialog box. I use a french version and the default value is set somewhere to .250 po instead of .250 in. I want to set this value correctly in my template.
Windows 7 64 bits french
Inventor pro 2014 french
I am experincing an issue with display quality when using broken views in Inventor 2013 drawings.
After adding the break to any view in the drawing, part geometry and draft items in all views disappear/reappear upon zooming in and out on the drawing. The entities are still there (they can be highlited and selected), but they are not displayed.
If the view is deleted, or the break removed from the view, the problem goes away.
This seems to be related to the software because both myself and a co-worker are experiencing the same thing while using competely different hardware configurations.
Is it possible to break a dimension line as shown in attached jpg ?
It is possible in AutoCAD I know but is it possible in Inventor ?
is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.
Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies View RelatedJust got updated from IV 2012 to 2013 with a new Dell (yawn) workstation to boot. OK, I did a section view of a pretty complex assembly and when I tried to take a measurement, the section view just dissapeared and it went back to full view. One of the primary uses of using section views is to view / inspect / measure, that which cannot be seen in the normal full view.
Why did this break in 2013 ? and is there a patch to fix it ?
does Inventor offers any option to break geometry lines in drawing behind the text (e.g. notes and dimensions)? I tried this in IV 2009 as well as in IV 2011, but the result is the same in both version, shown on first image. The text is sometimes difficult to read when it is crossed with geometry lines.
View 5 Replies View RelatedI opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
I just installed Inventor 2013 (First Mistake) and when I attempt to creat a breakout view, Inventor crashes. The folks at Autodesk are blaming this on my machine running multiple threads. Aren't all modern computers supposed to be running multiple threads?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedI have a view of an assembly where I used a break out to break through a part. I want to make a section of this, and have that view respect that the part was broken and show it as broken in the new view.
The section view shows the full part 100% unbroken. In the edit view, the only option for cut inheritance is "break". All others are greyed out.
Why I want to do this: I am unable to break it in the section view because there is no option to break through a single part a specified distance. I cannot break an area "from point" or "to sketch" because they don't let you choose a single part for the effect, and the parts completely included in the break out this way are not going to show up in the parts list, so you cannot adjust their section participation, therefore I also cannot just break an area and then choose what parts don't get the effect.
Design view representations in an iPart file are not included in the generated members after installing Inventor 2014 SP2 (and also in Update 1).
In the attached part factory, the two work planes are included in the members. They would need to be individually set invisible in each assembly view representation because the members only have the Master view representation.
When creating a break out view on a top level assembly that includes frame generator components, the break out function does not break these parts out. I know it is working because the non-frame generator parts are disappearing and being broken out as you would expect but the frame generated parts seem to be immune to the command. is this a common fault or something wrong with my particular model?
View 2 Replies View Relatedis there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
I want that a section parallel and through a threaded hole will show the double lines of the thread.
Now only a hole is shown
I use the same sketch to create a break out view in one type of drawing. I may be blind, but I can't seem to find a way to save that sketch and reuse it when I want to create a break out view.
View 4 Replies View RelatedI can't create a split view of a section broken in. I've attached the screenshot.Is there a workaround to do it?
View 1 Replies View RelatedIs there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View RelatedPutting in a simple berm crest, and the triangles skip right over a certain section. Swap edge does nothing and adding points seems to make things worse. I have been able to fix this problem before, but only by deleting my surface and then putting all the pieces back in at once. Then it's perfect.
I think part of the problem may be that the "Contour help" I put in at the blue major contours is screwing things up.I have had the same issue when putting in down-slope channels as well.
Is there a way to quckly join contour lines that have been broken where the contour elevation is?
example, if this were a contour line ---------501---------
I'd want to delete the contour elevation and join the line to make a continuous contour line.....
I would like to have dimensions on a particular view based on selected lines and curves.
How to get the line and curve's start point and end point for me to use in dimensioning either linear or baseline?
I have a break line in the drawing that I want to locate within the surface definition , how can I do this?
Civil 3D, 2009
Win 7 Enterprise 64bit
8 GB
Is there a command that would break lines at intersections automatically?
I know there is such a command in autocad map 3D, but is there a way to do it in LT? With a macro?
I have attached a picture of the parcels that I like to break at each intersection has an example.
Then I go on to use the OVERKILL command which works very well.
I used the "break" command to split some lines into segments, but now I can not join them again using PEDIT. They are all on the same elevation. What is preventing me from joining them? I've attached the file in question, I'm trying to join the red (metal layer) lines.
View 3 Replies View Related