AutoCAD Inventor :: Broken View Display
Oct 4, 2012
I am experincing an issue with display quality when using broken views in Inventor 2013 drawings.
After adding the break to any view in the drawing, part geometry and draft items in all views disappear/reappear upon zooming in and out on the drawing. The entities are still there (they can be highlited and selected), but they are not displayed.
If the view is deleted, or the break removed from the view, the problem goes away.
This seems to be related to the software because both myself and a co-worker are experiencing the same thing while using competely different hardware configurations.
View 6 Replies
ADVERTISEMENT
Aug 14, 2013
Where can I change the default gap value in the initial display of the Broken View dialog box. I use a french version and the default value is set somewhere to .250 po instead of .250 in. I want to set this value correctly in my template.
Windows 7 64 bits french
Inventor pro 2014 french
View 3 Replies
View Related
May 5, 2006
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies
View Related
Jun 26, 2013
Just got updated from IV 2012 to 2013 with a new Dell (yawn) workstation to boot. OK, I did a section view of a pretty complex assembly and when I tried to take a measurement, the section view just dissapeared and it went back to full view. One of the primary uses of using section views is to view / inspect / measure, that which cannot be seen in the normal full view.
Why did this break in 2013 ? and is there a patch to fix it ?
View 9 Replies
View Related
Dec 3, 2013
Design view representations in an iPart file are not included in the generated members after installing Inventor 2014 SP2 (and also in Update 1).
In the attached part factory, the two work planes are included in the members. They would need to be individually set invisible in each assembly view representation because the members only have the Master view representation.
View 2 Replies
View Related
May 14, 2013
I can't create a split view of a section broken in. I've attached the screenshot.Is there a workaround to do it?
View 1 Replies
View Related
Jul 13, 2012
Is there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies
View Related
Jan 9, 2014
Our company recently made a huge leap forward moving from Inventor 11 to Inventor 2014. We have found an issue with Tweak Trails that we cannot seem to get resolved.
The trails are displaying on "top" of the assembly geometry in both the IPN and the IDW files. For instance if I pull a shaft our of normal position, the trail will display completely over the holding piece, instead of "disappearing" as it goes into the hole. I have a picture below that shows what we are experiencing.
Notice that the trail shown on the shaft is visible on "top" of the shaft, as well as the mating pieces geometry. We were used to seeing the trail "under" the model geometry, and only visible from the end of the shaft into the hole. Is it possible to get this visualization style back?!?
View 1 Replies
View Related
Dec 14, 2011
How to change the outline display colour when creating views on an Inventor drawing ? I've placed my base view and gone to create detail view - now I want to be able to change the outline marker colour from the default black.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Apr 30, 2010
I cannot find any information anywhere on whether there exists an option to save different defaults to the Place Views>Base Drawing View>Display Options tab? The parts I model always need "tangent edges" shown to look correctly on my drawings, and for 5 years I've had to manually select it every time I do a drawing. It just seems that there has GOT to be a way to get rid of this tedious step? And if there is not, can you plainly include this in the documentation so I can stop looking for such a feature?
View 8 Replies
View Related
Apr 20, 2013
I have a client that is having difficulty with Design View Representations. He has approximately 15 view representations, each having items in different states of visibility. The icons display the modes of visibility correctly, however, there are no objects visible in the graphics window at all. Additionally, the option, "Find in Window" is missing when right-clicking on visible objects. Only when he copies the View Representation over to a LOD, and then saves that back out to a VR, do the graphics in the window appear correctly. Then the Option, Find in Window shows up and is available.
View 1 Replies
View Related
Dec 8, 2011
I can't get the cable to show up in any drawing views.
View 3 Replies
View Related
Jan 10, 2013
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
View 5 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Oct 22, 2013
Is there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...
View 2 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Jan 29, 2013
I have a need to find the solution for a viewport issue. Model space, create view, when selected goes to correct view size. When placing same view in layout on paper space the graphics to be viewed are too small & do not fill the paper space viewport.
View 1 Replies
View Related
Feb 28, 2012
One of my users has been complaining that his "right click stops working". I have verified the problem myself, and find it very odd. It seems to be exclusive to his machine, which is a Windows XP 32 bit, I think with 4GB RAM and a decent gaming graphics card running IV 2012.
After he's been working about half of the day he suddenly is unable to right click and bring up his context menu. He then has to save his work and reboot his machine. After this he'll be good again for a few hours.
I asked him if he can bring up his context menu on other applications when IV's stops working. He didn't know but said he would try it the next time he has the problem.
I also asked him if he's using a 3 gig switch.
View 3 Replies
View Related
Apr 12, 2013
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
View 7 Replies
View Related
Dec 31, 2011
I changed some feature on a sketch that was working and broke it. When I close the sketch a window shows the problems. A typical message is " Fillet1: Could not build this Fillet". The name "Fillet1" was automatically assigned. by Inventor. The questions is, how do I find Fillet1 in my sketch so I can fix it? I have looked in Parameters and that doesnt tell me.
View 6 Replies
View Related
May 30, 2013
When working inside an ipt, I want to open the idw from the browser using the right-click > "open drawing" option. The link is broken, however; so the idw must be searched for manually and opened. How can I repair the link so I can open the idw from the ipt browser in the future?
View 3 Replies
View Related
May 18, 2012
I have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?
View 4 Replies
View Related
Jan 3, 2013
Using Conceptual View, I have hanger plates that intersect an arch, and previously where they intersect you couldn't see inside the arch just the surface. Since saving as another drawing to add hangers details something has changed in the display and the arch appears transparent at the moment so you cant see where along the plates the arch intersects.
Unless you zoom right into the intersection, the surfaces appear and zoom out and it goes transparent again.
View 1 Replies
View Related
Jun 22, 2012
When I switch from 2D top view to an isometric view my cursor disappears. This is a completely new drawing file so maybe something is not set right.
View 3 Replies
View Related
Feb 8, 2012
I created a derived part and I broken the link with its parent. Is there a way to relink the two parts?
Autodesk Inventor 2011
View 5 Replies
View Related
Feb 27, 2012
The basic save, when making an inventor drawing....
Produces a file that is a Black Panel, to Every other program than inventor... (Tried 5 so far, some just fail to open)
REALLY basic thing that is failing... is it really a proprietary file they "called" .dwg?
Or is there some setting I have on?
View 3 Replies
View Related
Apr 30, 2013
How I have come to this question is through the process of trying to realistically show a hydrant in profile view. First off it it possible to create a completely vertical pipe in C3D? Also if you can, is it possible to show that in profile view? Basically, what I am trying to avoid is representing a fire hydrant pipe by creating some sort of custom cyclinder part in partbuilder. I have done this, but do not like the results.
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 3 Replies
View Related
Sep 3, 2009
How to change the Tool display to the classic view, like the regular view back in the AutoCAD 2004/05 etc..
View 9 Replies
View Related
Apr 17, 2012
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
View 6 Replies
View Related
Jul 31, 2013
Adding the second layer of weld in the dialog box, it is impossible to specify the weld size as the text areas don't show up when the symbol is added. The bottom weld symbol works fine though.
View 6 Replies
View Related
Nov 1, 2011
how to heal a chained centreline between a row of hole features?
Here is my current work practice...
I have a panel with a row of hole features, they are not an array as the pitch between holes typically varies.
I create a chain of centres along the row.
I copy the panel and drawing to make a similar part but I remove one of the holes from the middle of the row.
Now the chain centreline is broken, obviously missing a feature and I cannot find a way to heal the centreline unless I delete and recreate it.
There is also the switcharound too where I add a hole within the row.I typically have to do this for nearly 60 similar panels.
View 4 Replies
View Related
