Where can I change the default gap value in the initial display of the Broken View dialog box. I use a french version and the default value is set somewhere to .250 po instead of .250 in. I want to set this value correctly in my template.
Windows 7 64 bits french
Inventor pro 2014 french
I am experincing an issue with display quality when using broken views in Inventor 2013 drawings.
After adding the break to any view in the drawing, part geometry and draft items in all views disappear/reappear upon zooming in and out on the drawing. The entities are still there (they can be highlited and selected), but they are not displayed.
If the view is deleted, or the break removed from the view, the problem goes away.
This seems to be related to the software because both myself and a co-worker are experiencing the same thing while using competely different hardware configurations.
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies View RelatedJust got updated from IV 2012 to 2013 with a new Dell (yawn) workstation to boot. OK, I did a section view of a pretty complex assembly and when I tried to take a measurement, the section view just dissapeared and it went back to full view. One of the primary uses of using section views is to view / inspect / measure, that which cannot be seen in the normal full view.
Why did this break in 2013 ? and is there a patch to fix it ?
Design view representations in an iPart file are not included in the generated members after installing Inventor 2014 SP2 (and also in Update 1).
In the attached part factory, the two work planes are included in the members. They would need to be individually set invisible in each assembly view representation because the members only have the Master view representation.
I can't create a split view of a section broken in. I've attached the screenshot.Is there a workaround to do it?
View 1 Replies View RelatedIs there any way to get the broken symbol in a broken dimension like shown below?
View 9 Replies View RelatedHow can i change my default setting from picture 1 to a new setting like picture 2 when i open up a new part file and assembly file.Is there a setting i can change so whenever i open a new part file & assembly i have this setting as my default.
IV2012
Is there a way (IV2012) to have the drawing view default to 1:1 when inserting a detail into the sheet? Now it tries to select a scale based on who knows what.
View 8 Replies View RelatedI have dimensioned hundreds of drawings with the Ordinate Dimension command in Inventor 5.1. I'm now using Inventor 2011 and I'm having lots of issues using this command. When I first set up the dimensions, I can't get the dimensions to default close to the view. They almost always want to be on the very edge of the title block. I don't think this is a sttings problem, because occasionally they will lock to where I want them. What am I doing wrong?
The first attachment is how they go on their own. In the second attachment, I have manually moved them, but at 1 dimension per move, it's slow, and also hard to keep the all aligned.
Autodesk Inventor 2011
AutoCAD Mechanical 2011
Whenever I do a model update through an ilogic form my View representation changes from default to master and then i have to go and manually change them back to default also in my idw files in order to update the drawing files I have to go in and change the view representation from default to master click ok and close it then open view edit set it to default and close. Is this normal? Is there a setting so that my model views will stay on default?
View 2 Replies View RelatedIs it just me, or did the Drawing View Thread Feature option get switch to default OFF, where it used to be on? Did I do something on accident to make this happen? how I can get it back by default?
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
When creating views in Inventor 2013 the text displayed for example VIEW001 (1:1)VIEW 001 is placed under the view by default. I would like this to be above the view by default.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
For some reason regardless of what I save or the fact that I've saved the template files, everytime I open a new file it automatically adds shadows and applies perspective view. This is extremely annoying. How do I alter the default settings to be ortho with no shadows?
View 7 Replies View RelatedWhen you have a part with a thread feature, the default setting should show the thread feature in the drawing view...rather than making the user right click the view and select "Display Thread Feature". I don't understand why this doesn't show up in the drawing automatically...it is, after all, a feature on the part.
View 3 Replies View RelatedAny way to change the "View" of parts on file open? When I open an .ipt or .iam the Visual style view is always "Shaded". I want this to be "Shaded with Edges".
View 7 Replies View RelatedIs there any tool in AutoCAD 2014 to obtain broken section view (generated from a base view in a layout?I have some very long section views and just can't find a way to shorten them...
View 2 Replies View RelatedIs there a way to set the drawing view to be associative or non-associative by default in my .idw template?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
One of my users has been complaining that his "right click stops working". I have verified the problem myself, and find it very odd. It seems to be exclusive to his machine, which is a Windows XP 32 bit, I think with 4GB RAM and a decent gaming graphics card running IV 2012.
After he's been working about half of the day he suddenly is unable to right click and bring up his context menu. He then has to save his work and reboot his machine. After this he'll be good again for a few hours.
I asked him if he can bring up his context menu on other applications when IV's stops working. He didn't know but said he would try it the next time he has the problem.
I also asked him if he's using a 3 gig switch.
My company is using inventor 2010. I have 64 bit edition. When I zoom in on a dwg or ipt it zooms for like 1mm then my screen goes gray. If i click the restore down button then restore back to max drawing comes back but as soon as i try to scroll zoom again with my bamboo pen the screen grays out again. I've already updated my video driver to latest version and i've updated my bamboo pen driver to latest version. I also booted windows 7 64 bit into safe mode and check device manager to make sure no broken drivers or anything like that. Some times it will work for a few min then start graying out my screen again.
View 7 Replies View RelatedI changed some feature on a sketch that was working and broke it. When I close the sketch a window shows the problems. A typical message is " Fillet1: Could not build this Fillet". The name "Fillet1" was automatically assigned. by Inventor. The questions is, how do I find Fillet1 in my sketch so I can fix it? I have looked in Parameters and that doesnt tell me.
View 6 Replies View RelatedWhen working inside an ipt, I want to open the idw from the browser using the right-click > "open drawing" option. The link is broken, however; so the idw must be searched for manually and opened. How can I repair the link so I can open the idw from the ipt browser in the future?
View 3 Replies View RelatedWhen I open my 3D model I want it to start in a certain view and I can't figure out how to change this setting.
View 3 Replies View RelatedI created a derived part and I broken the link with its parent. Is there a way to relink the two parts?
Autodesk Inventor 2011
The basic save, when making an inventor drawing....
Produces a file that is a Black Panel, to Every other program than inventor... (Tried 5 so far, some just fail to open)
REALLY basic thing that is failing... is it really a proprietary file they "called" .dwg?
Or is there some setting I have on?
I opened Inventor and on the ribbon there are only lines and boxes.
Its happening a few machines but not all in a lab.
I did download a patch last week, could this be the cause ??
Adding the second layer of weld in the dialog box, it is impossible to specify the weld size as the text areas don't show up when the symbol is added. The bottom weld symbol works fine though.
View 6 Replies View Relatedhow to heal a chained centreline between a row of hole features?
Here is my current work practice...
I have a panel with a row of hole features, they are not an array as the pitch between holes typically varies.
I create a chain of centres along the row.
I copy the panel and drawing to make a similar part but I remove one of the holes from the middle of the row.
Now the chain centreline is broken, obviously missing a feature and I cannot find a way to heal the centreline unless I delete and recreate it.
There is also the switcharound too where I add a hole within the row.I typically have to do this for nearly 60 similar panels.
How to fix a broken link to an excel table in an idw file general table?I changed the folder name and heirarchy of the project.i expected the idw tables to find their parent excel files in the same folder with a new name, but they didn't.
I could find nothing for fixing broken excel links.
I wanted to go through all of the Essentials videos for Inventor (URL... ) but every single link listed for the Essentials is broken. Is there another place I can find them?
View 3 Replies View RelatedI have several drawings with tables on them with broken links to spreadsheets which have been deleted.I can't edit the tables.
Is there a way of reusing the information in the table to recreate the spreadsheets or new tables.
