AutoCAD Inventor :: Exploded View Trails Display
Jan 9, 2014
Our company recently made a huge leap forward moving from Inventor 11 to Inventor 2014. We have found an issue with Tweak Trails that we cannot seem to get resolved.
The trails are displaying on "top" of the assembly geometry in both the IPN and the IDW files. For instance if I pull a shaft our of normal position, the trail will display completely over the holding piece, instead of "disappearing" as it goes into the hole. I have a picture below that shows what we are experiencing.
Notice that the trail shown on the shaft is visible on "top" of the shaft, as well as the mating pieces geometry. We were used to seeing the trail "under" the model geometry, and only visible from the end of the shaft into the hole. Is it possible to get this visualization style back?!?
View 1 Replies
ADVERTISEMENT
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related
Feb 21, 2012
How to create a Exploded view animation showing the assembly exploding and collapsing? I only can show the collapsing. Do not know how to show exploding first and then collapsing.
View 7 Replies
View Related
Feb 19, 2013
I need to create an exploded view of an assembly to show how it's supposed to be put together. "Hey, why not use the slick presentation feature in Inventor? I've already got the model!" It's not working out to be that slick.
Outlined in red, is the "wrong" trail that Inventor put in by default. I added the highlighted trail, which is what I want and reflects how things actually go together. How do I get rid of the one I don't want? Hide turns off both of them. Delete deletes the tweak. All I've found was a workaround where I hide the line in the drawing.
View 2 Replies
View Related
Oct 8, 2013
I hid a part or something in a presentation drawing. This was within the presentation environment.
It asked if I wanted to remove associativity. I did. Now I want to put it back. How do I turn it back on? Basically, I've added new parts and they won't show up in the presentation explosion.
Inventor 2013
View 1 Replies
View Related
Nov 7, 2012
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies
View Related
Dec 1, 2011
In some drawings, parts and trail lines will randomly disappear or get rearranged. Once the parts disappear, the only way we're able to get them back is by copy and paste the explosion into the presentation file and regenerate the view.what happened to the .idw file and how it should look.
We've tried replacing the video card and repairing the Inventor installation, but still experience the same issue on some drawings.Running Inventor 2008 on Windows XP.
View 2 Replies
View Related
Nov 23, 2012
I have made a 3d model of my balcony by simply extruding the steel profiles I used in my sections. I then used the union command to join them all together.
I now think and exploded isometric may be the better way to present the drawing but as I have now made the frame all one element what is the best way to seperate it?
the corners I think will be easy I just create a planar at 45 degrees and use that to split the corners but is there an easy way to seperate the mid PFC and angle?
View 8 Replies
View Related
Jun 27, 2012
How to create an assembly exploded view of a draw with Invetron Fusion 2013.
View 0 Replies
View Related
Feb 23, 2012
Is there a way to remove the trails from a presentation one they have been added using the tweak components command ? These are shown on the animation but I can't seem to remove them without completely redoing the animation.
View 3 Replies
View Related
Oct 4, 2012
I am experincing an issue with display quality when using broken views in Inventor 2013 drawings.
After adding the break to any view in the drawing, part geometry and draft items in all views disappear/reappear upon zooming in and out on the drawing. The entities are still there (they can be highlited and selected), but they are not displayed.
If the view is deleted, or the break removed from the view, the problem goes away.
This seems to be related to the software because both myself and a co-worker are experiencing the same thing while using competely different hardware configurations.
View 6 Replies
View Related
Jul 23, 2013
How I can make these trails fade faster?
View 2 Replies
View Related
May 21, 2012
I have an Inventor presentation file (.ipn) which is displaying all the trails from the various components.
I have gone to animate and saved as a wmv video clip, the trails have been recorded with the video clip however I do not want them to be visible. Is there a way to animate / record a short wmv clip of my explosion with the trails removed ?
I know I can remove them in my IPN but I do not want to do this, I only want them to be invisible in the video clip.
View 6 Replies
View Related
May 17, 2012
I have a drawing which is referencing a .ipn model, the .ipn model has all of it's trail line invisible however the drawing is showing them all visible. What I am trying to do is find a simple and quick way to turn off the visibility of ALL the trail lines in the drawing without having to pick out each one and ajust manually, The model .ipn is quite complicated and has many trails on it so I really need a way to turn off the visibility of these in the drawing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 6 Replies
View Related
Dec 14, 2011
How to change the outline display colour when creating views on an Inventor drawing ? I've placed my base view and gone to create detail view - now I want to be able to change the outline marker colour from the default black.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Apr 30, 2010
I cannot find any information anywhere on whether there exists an option to save different defaults to the Place Views>Base Drawing View>Display Options tab? The parts I model always need "tangent edges" shown to look correctly on my drawings, and for 5 years I've had to manually select it every time I do a drawing. It just seems that there has GOT to be a way to get rid of this tedious step? And if there is not, can you plainly include this in the documentation so I can stop looking for such a feature?
View 8 Replies
View Related
Apr 20, 2013
I have a client that is having difficulty with Design View Representations. He has approximately 15 view representations, each having items in different states of visibility. The icons display the modes of visibility correctly, however, there are no objects visible in the graphics window at all. Additionally, the option, "Find in Window" is missing when right-clicking on visible objects. Only when he copies the View Representation over to a LOD, and then saves that back out to a VR, do the graphics in the window appear correctly. Then the Option, Find in Window shows up and is available.
View 1 Replies
View Related
Dec 8, 2011
I can't get the cable to show up in any drawing views.
View 3 Replies
View Related
Jan 10, 2013
Is there a way to have a view in a sheet that displays a few specific components of an master assembly? There is a motor/gear-box assembly within my master assembly that I don't want to make a separate assembly for BOM purposes, but I want a .ipn view with the motor/gear-box "assembly" exploded. I tried making everything else in the master assembly "not visible" for the particular .ipn view, which works fine, but if I add or replace anything in the master assembly, those additions appear in the motor/gear-box .ipn and screw up the view.
I could just make a whole new assembly for the motor/gear-box and use that for the exploded view, but I would rather the view update to reflect slight changes I make in the motor/gear-box "assembly" from within the master assembly.
So can I create a .ipn view and say, "I want these particular components of an assemly to appear in this view but nothing else"?
View 5 Replies
View Related
Sep 14, 2013
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
View 6 Replies
View Related
Jul 11, 2012
How to edit the explode steps in an explode file? I have created an exploded view of an assembly, only I have edited the assembly by adding a whole bunch of fasteners etc. Now I want to go into the explode file and add the extra components to the related exploded steps - only there is no steps to add the new components too, each component is on its own. The functionality I am talking about is a sw thing and there is probably another process to do this, or a work around.
View 9 Replies
View Related
Jan 27, 2012
I am trying to create an exploded view for the first time in Inventor. In trying to follow these directions from the help file.
First I had to customize my ribbon to add these commands because I cannot find the "Presentations" tab.
Next when I inserted these commands into a user commands portion, they were greyed out. I am trying to do this in assembly mode. I assume that is where it should be done.
View 5 Replies
View Related
Dec 20, 2012
I was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
View 9 Replies
View Related
Jan 29, 2013
I have a need to find the solution for a viewport issue. Model space, create view, when selected goes to correct view size. When placing same view in layout on paper space the graphics to be viewed are too small & do not fill the paper space viewport.
View 1 Replies
View Related
Feb 22, 2012
my crosshair displays the trails all the time. What can I do to resolve this problem; it's not the mouse setting.
View 2 Replies
View Related
May 18, 2012
I have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?
View 4 Replies
View Related
Jan 3, 2013
Using Conceptual View, I have hanger plates that intersect an arch, and previously where they intersect you couldn't see inside the arch just the surface. Since saving as another drawing to add hangers details something has changed in the display and the arch appears transparent at the moment so you cant see where along the plates the arch intersects.
Unless you zoom right into the intersection, the surfaces appear and zoom out and it goes transparent again.
View 1 Replies
View Related
Jun 22, 2012
When I switch from 2D top view to an isometric view my cursor disappears. This is a completely new drawing file so maybe something is not set right.
View 3 Replies
View Related
Apr 30, 2013
How I have come to this question is through the process of trying to realistically show a hydrant in profile view. First off it it possible to create a completely vertical pipe in C3D? Also if you can, is it possible to show that in profile view? Basically, what I am trying to avoid is representing a fire hydrant pipe by creating some sort of custom cyclinder part in partbuilder. I have done this, but do not like the results.
Civil 3D 2013 SP2 | Win 7 64-bit SP1
Intel Core i5-2500 @ 3.30GHz, 8GB Ram | ATI Radeon HD 5450
View 3 Replies
View Related
Sep 3, 2009
How to change the Tool display to the classic view, like the regular view back in the AutoCAD 2004/05 etc..
View 9 Replies
View Related
Mar 17, 2013
IF it is possible to display the alignment/profile position (X, Y, Z) on each section view?
Refer attached for example.
View 1 Replies
View Related
