How to create a Exploded view animation showing the assembly exploding and collapsing? I only can show the collapsing. Do not know how to show exploding first and then collapsing.
View 7 RepliesI have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedI need to create an exploded view of an assembly to show how it's supposed to be put together. "Hey, why not use the slick presentation feature in Inventor? I've already got the model!" It's not working out to be that slick.
Outlined in red, is the "wrong" trail that Inventor put in by default. I added the highlighted trail, which is what I want and reflects how things actually go together. How do I get rid of the one I don't want? Hide turns off both of them. Delete deletes the tweak. All I've found was a workaround where I hide the line in the drawing.
I hid a part or something in a presentation drawing. This was within the presentation environment.
It asked if I wanted to remove associativity. I did. Now I want to put it back. How do I turn it back on? Basically, I've added new parts and they won't show up in the presentation explosion.
Inventor 2013
Our company recently made a huge leap forward moving from Inventor 11 to Inventor 2014. We have found an issue with Tweak Trails that we cannot seem to get resolved.
The trails are displaying on "top" of the assembly geometry in both the IPN and the IDW files. For instance if I pull a shaft our of normal position, the trail will display completely over the holding piece, instead of "disappearing" as it goes into the hole. I have a picture below that shows what we are experiencing.
Notice that the trail shown on the shaft is visible on "top" of the shaft, as well as the mating pieces geometry. We were used to seeing the trail "under" the model geometry, and only visible from the end of the shaft into the hole. Is it possible to get this visualization style back?!?
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies View RelatedIn some drawings, parts and trail lines will randomly disappear or get rearranged. Once the parts disappear, the only way we're able to get them back is by copy and paste the explosion into the presentation file and regenerate the view.what happened to the .idw file and how it should look.
We've tried replacing the video card and repairing the Inventor installation, but still experience the same issue on some drawings.Running Inventor 2008 on Windows XP.
I have made a 3d model of my balcony by simply extruding the steel profiles I used in my sections. I then used the union command to join them all together.
I now think and exploded isometric may be the better way to present the drawing but as I have now made the frame all one element what is the best way to seperate it?
the corners I think will be easy I just create a planar at 45 degrees and use that to split the corners but is there an easy way to seperate the mid PFC and angle?
How to create an assembly exploded view of a draw with Invetron Fusion 2013.
View 0 Replies View RelatedHow to edit the explode steps in an explode file? I have created an exploded view of an assembly, only I have edited the assembly by adding a whole bunch of fasteners etc. Now I want to go into the explode file and add the extra components to the related exploded steps - only there is no steps to add the new components too, each component is on its own. The functionality I am talking about is a sw thing and there is probably another process to do this, or a work around.
View 9 Replies View RelatedI am trying to create an exploded view for the first time in Inventor. In trying to follow these directions from the help file.
First I had to customize my ribbon to add these commands because I cannot find the "Presentations" tab.
Next when I inserted these commands into a user commands portion, they were greyed out. I am trying to do this in assembly mode. I assume that is where it should be done.
So I've been creating a building and I can't seem to get rid of (or hide) the lines that make up the edges of my surfaces (or solid) in the animation view. Is this typical?
For instance, I have one side of the building that is using 4 different textures all on the same plane and they butt up to one another (example: brick meets siding). Where these two surfaces meet the lines that makes up the edges of the surface won't go away. Thus always showing white line showing the boundaries o the individual surfaces.
Can I turn these off, hide them, or am I being a total 3D Modeling noob and missing something basic?
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies View RelatedI started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
I made a drawing, but after using ilogic (ilogic is in drawing,assembly, part) in it, drawing view of a particular part is coming in hidden line, other are shaded as u can see in image.
Drawing view is associative, all edges shown, level of detail is master, view style is Hidden Line Removal with Shaded
Computer Config:
Inventor 2013
Intel Xeon CPU
2.67 GHZ
8 Gb ram
Windows 7 64 bit
Is it possible to have the parent view for the section in one drawing and the child views in another drawing?
View 2 Replies View RelatedI've created a drawing and when I create a detail view, the actual view appears in the drawing but the circle and arrows along with the view identifier are not showing up. It's like the visibility has been turn off. how to turn it back on?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
After upgrading to Inventor 2014 we notice that the graphics do not work properly, and that the overall performance in drawings and modelling bad compared to 2013. Then we installed SP1 and now drawing views are disappearing, however when we select "shaded" view the view reappears and works perfectly..
Any workaround regarding disappearing views?
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View Relatedhow to show section view in base view with out projection the component.
View 2 Replies View RelatedI have a long shaft with parts mounted on. i want to section it and show the parts. i don't need to show the whole length of the shaft.
I know i can crop the isometric view, but this way i will not see the key hole which is on the other side, it's hidden.
If i make a section it 's in an orthogonal view only.
I want to make the section view, but later to transform the sectioned view to an isometry. is it possible?
Is there a way to save a section view in the assembly as a view rep? Am using 2011.
View 9 Replies View RelatedEach time when I place a part in base view, have to follow few steps; go through view label, format Text, than choose type option - [Properties-Model] and its property - [Part Number], than placing dimensions. it takes long time and very repetitive, especially, when placing a hundreds of parts and I was wondering if there is an option, to set up view label; [Properties - Model ]& [Part number], as a DEFAULT. So, each time placing a part, in base view it will come up with correct label. Also, overall dimensions, can it be retrieve using parameters of the part?
View 4 Replies View RelatedI have a detail view of a groove on a cylinder. I want to dimension a diameter in which I only see one side, the other side is not in the detail view.
From some posts I see that I should auto insert a centerline then dimension from centerline then choose options "dimension linear".
First when I try to auto insert centerlines it does not insert the centerline for me. Perhaps because my detail is smaller. If I make the field for the detail view larger it makes a centerline, but I dont want to do that. I have tried making a sketch of the other side and the centerline. When I dimension from here I do not have the right click option of dimension linear, instead only arrowhead options.
Using Inventor Professional 2012
I am inserting some mechanical changes into my master drawing (updating my as built drawing). I copy with base point the hvac changes, I paste into the master drawing and all is cool; the block looks fine. When I explode the block, the text and some hvac blocks (like elbows with attribute) are way out off scale, like way bigger than they should be.I don't get it.
View 9 Replies View Relatedi'm working with this dwg that has a block in it that says "cannot be exploded" every time i try to explode it. is there anyway i can still get this thing exploded?
View 2 Replies View RelatedIt's possible to do a cut view with the cup part with a different view style from the other "not Cut" half.
I achieve that, whit the cut view + normal view croped hover the cut view... but this isn´t a accurate process...
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
I place the first view in a drawing and want to be sectioned.
Is there a way to do that, since when i mark the section line, another view is created.
Or should i put the main view outside of the paper boundaries?
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedI have a Crop View of a IAM and want/need a Projected View of the Crop View. When I select the Crop View as my base and then select try to create a Projected View, I get the whole IAM.
I guess one could use the Section View and eliminate all the items I don't need for my Base View.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
I'm using AutoCAD 2013. I need to explode text so that it will appear as line work, otherwise my surveying instrument won't display it.
When i use the express tools explode text command, the text disappears, this message is shown in the command bar
"The line objects have been placed on layer 0."
However, there is nothing on layer zero. Might this have something to do with missing shape files, or can AutoCAD only explode certain simple forms of text?