AutoCAD Inventor :: Edit Exploded Views
Jul 11, 2012
How to edit the explode steps in an explode file? I have created an exploded view of an assembly, only I have edited the assembly by adding a whole bunch of fasteners etc. Now I want to go into the explode file and add the extra components to the related exploded steps - only there is no steps to add the new components too, each component is on its own. The functionality I am talking about is a sw thing and there is probably another process to do this, or a work around.
View 9 Replies
ADVERTISEMENT
Jan 27, 2012
I am trying to create an exploded view for the first time in Inventor. In trying to follow these directions from the help file.
First I had to customize my ribbon to add these commands because I cannot find the "Presentations" tab.
Next when I inserted these commands into a user commands portion, they were greyed out. I am trying to do this in assembly mode. I assume that is where it should be done.
View 5 Replies
View Related
Jun 14, 2012
I am trying to achive various exploded renders. I have done this in the past using the section box tool and moving the view up and down to reveal or hide parts.I am wanting to do a constructional exploded render as shown in the image attached.
View 8 Replies
View Related
Feb 21, 2012
How to create a Exploded view animation showing the assembly exploding and collapsing? I only can show the collapsing. Do not know how to show exploding first and then collapsing.
View 7 Replies
View Related
Feb 19, 2013
I need to create an exploded view of an assembly to show how it's supposed to be put together. "Hey, why not use the slick presentation feature in Inventor? I've already got the model!" It's not working out to be that slick.
Outlined in red, is the "wrong" trail that Inventor put in by default. I added the highlighted trail, which is what I want and reflects how things actually go together. How do I get rid of the one I don't want? Hide turns off both of them. Delete deletes the tweak. All I've found was a workaround where I hide the line in the drawing.
View 2 Replies
View Related
Oct 8, 2013
I hid a part or something in a presentation drawing. This was within the presentation environment.
It asked if I wanted to remove associativity. I did. Now I want to put it back. How do I turn it back on? Basically, I've added new parts and they won't show up in the presentation explosion.
Inventor 2013
View 1 Replies
View Related
Jan 9, 2014
Our company recently made a huge leap forward moving from Inventor 11 to Inventor 2014. We have found an issue with Tweak Trails that we cannot seem to get resolved.
The trails are displaying on "top" of the assembly geometry in both the IPN and the IDW files. For instance if I pull a shaft our of normal position, the trail will display completely over the holding piece, instead of "disappearing" as it goes into the hole. I have a picture below that shows what we are experiencing.
Notice that the trail shown on the shaft is visible on "top" of the shaft, as well as the mating pieces geometry. We were used to seeing the trail "under" the model geometry, and only visible from the end of the shaft into the hole. Is it possible to get this visualization style back?!?
View 1 Replies
View Related
Nov 7, 2012
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies
View Related
Dec 1, 2011
In some drawings, parts and trail lines will randomly disappear or get rearranged. Once the parts disappear, the only way we're able to get them back is by copy and paste the explosion into the presentation file and regenerate the view.what happened to the .idw file and how it should look.
We've tried replacing the video card and repairing the Inventor installation, but still experience the same issue on some drawings.Running Inventor 2008 on Windows XP.
View 2 Replies
View Related
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related
Apr 3, 2013
I am trying to create a second base view (using Layout/Create View/Base from model space). The problem is, I need it to be rotated from the original base view. However, when I rotate the part in model space, ALL of my views change.
So I guess my question is, how do I create multiple views of the same part that are seperate from the other base views?
View 9 Replies
View Related
Aug 29, 2013
i have views lets say 3 views on a sheet but in the list of views theres mores that appears maybe i inserted the extra views that are showing but i deleted them to put them on another sheet
the problem is they show up in the list of both sheet and i can't delete them from the list of the sheet that they were before
View 1 Replies
View Related
Jan 19, 2012
How could I get the idw views to name themselves? Instead of ” view 1”, “view2” why not have it name itself the file name, the same goes for a parts-list added to idw sheets? When slow clicking them to rename they already have the file name referencing the view or parts list. I have multiple views and multiple parts list on many sheets. Re-naming them is starting to get old!
I took a quick look at “ILOGIC” because that’s my “ILOGIC” speed and nothing jumped out at me.
View 2 Replies
View Related
Jul 11, 2013
Is there a way to change the way the dimensions text shows up at arbitrary angles and make them all uniform?
View 4 Replies
View Related
Mar 18, 2013
I have two seperate parts that I have laid out on a drawing. I wish to align these parts.... Is this possible?
View 2 Replies
View Related
Oct 6, 2011
Is there a way of dimensioning the distance between the views on a .idw?
I have a series of drawings to make, that consist of two view each. I need to make them as consistant as possible, as far as the distance from view to view, accross the drawings.
View 3 Replies
View Related
Nov 23, 2012
So I am trying to create section views that detail the correct assembly of two parts.
These parts are welded on top of each other so its important to have clear understanding of how they fit together.
So imagine a pipe bent in the shape of a circle, in the horizontal plane, then holes drilled into the top (vertically) and then another pipe fitting in the holes and being welded together. This is what is happening.
So I am trying to create a section view of one of the holes with the welding information.
When I go to create the section view, I draw a line that would pass through the center of the large horizontal circle (but doesnt) and the center of the hole I am trying to detail and through to the outside of the horizontal pipe.
Now with this line I should get a view of the assembly exactly perpendicular to the line from that point. This is what is called "Aligned" in Inventor and what I was taught as a "Section View". However, this is not the case at all. I get what is called a projected section view.
find a way to get an "Aligned" view of this without sectioning the entire assembly. I just want the small bit necessary to show the relevant information.
View 2 Replies
View Related
Oct 16, 2013
Let's say I have a flat pattern view of my part and the bended top view of the same part on the same drawing and I want both of the left side of each to be in line. (The right side shortends after the bends occur but the left side is not changed at all)
Work around:
1. Export to autocad and line them up with the osnaps, etc
I know how to sketch per view and project geometry but thats still on each view and when I try to line them up I am using my eye. Is there a better way to line both up even though their on different views?
View 5 Replies
View Related
Feb 12, 2013
oBaseView = osheet.DrawingViews.AddBaseView(otargetDoc, oPoint1, DrawingViewScale, kFrontViewOrientation, kHiddenLineDrawingViewStyle, "Default")oDraftView = osheet.DrawingViews.AddAssociativeDraftView(otargetDoc, oPoint1, DrawingViewScale)
I have one base view and one draft view created all at point1 with the same scale. It seems to me the base view's center is at point1. But not that of the draft view.
Just wondering how to overlay them to looks like one view with the same origin point. Or what coordinate I adjust, so I can draw on draft view, but looks like I was drawing on the base view?
Some additional lines are needed in drawing but can't get from projection of a model.
View 1 Replies
View Related
Oct 19, 2012
When creating Views in .ipn files, using View Reps from .iam files, you get "Options" window where you can check Associative box, or leave it unchecked. How do yo get back to this window once the view is created?
View 6 Replies
View Related
May 21, 2013
I have a problem with one of my Inventor DWGs.
It seems that whenever I save the associated model, there is a chance that it ruin the drawing by scattering views, dimensions and sketches randomly.
View 2 Replies
View Related
Oct 5, 2011
We recently started using Inventor DWG files (shifting away from IDW).
Part of the process for one of our programmers is to open a DWG file using AutoCAD Mechanical 2012, delete all unused dimensions and views, and use the remaining view to program his CNC machine. We are finding that this is not possible to do with the new format Inventor DWG files, as the views are not able to be selected.
What is the AutoCAD 2012 procedure for deleting views created with Inventor DWG?
View 9 Replies
View Related
Aug 10, 2012
I want to extract 2D drawing view of the attached model. I tried but could not succeed because most of the sketches are on the angled user defined work planes.
See the following links, I did the same for some of my other models:-
[URL] ...
[URL ...
How can I show the modelling process of this model with 2D drawings?
View 1 Replies
View Related
May 20, 2012
I create muliti solid parts. In the .idw view I want the section views to have same colour as the model. Is it possible?
View 6 Replies
View Related
Jun 17, 2013
I have a part given to me from a customer that has ALL custom planes turned on. This file is large and has many assemblies, part, sub assy's.... too much to go thru one at a time. Can I turn all 'plane views' off at once? Why? Because I find it messy... no other reason.
View 3 Replies
View Related
Oct 21, 2013
I have an IDW file that has a corresponding .IPT Everytime you import a .ipt onto a sheet, a text accompanies it. I want to write a macros to edit this text.
As an usual practise it gives "VIEW, DESCRIPTION and SCALE" .
Instead of VIEW , I want the code to pick something from the i-properties.
Eg. Instead of VIEW, it shopuld write the STOCK NUMBER from the iproperties of the part.
Is this possible ?
View 4 Replies
View Related
Aug 31, 2012
I am using Inventor 2013. For some reason I cannot dimension some of the model entities in the drawing views in an idw file. I can retrieve the model dimensions but it is usually easier to create the dimensions I need in each view. I can select the line, curve, etc. when dimensioning but nothing happens.
After I think about it. What I cannot dimension are lofts that I created with rails. These rails were made up of lines and curves, not polylines. How do I get the sketches for the rails I used for lofting to display in the drawing views so I can dimension those sketches.
View 9 Replies
View Related
Nov 10, 2013
I made a drawing and later changed the part to an ipart.
The dimensions of the table part in the drawing are o.k. but the iproperties, the contents of the logo doesn't update and it has a strange number string.
There is the yellow lightning symbol and even though i press update all sheets nothing happens and also the lightning symbol remains
View 2 Replies
View Related
Aug 16, 2012
At times when dimensioning or creating views in 2D, items will disappear. These items are dimensions or even complete views. They return as soon as hit the scroll wheel on the mouse or my 3D connexion mouse.
View 9 Replies
View Related
Jun 29, 2011
How to get orthographic views from a 3d model?
View 9 Replies
View Related
Dec 5, 2002
Why is it that individual views in an .idw always need to be updated? I will highlight a view, the thunderbolt icon lights up, I choose to update it, the view in the browser turns red and then the view up dates. if I highlight the view again it tells me the view needs to be updated again.
View 6 Replies
View Related
