AutoCAD Inventor :: Remove Trails From Presentation
Feb 23, 2012
Is there a way to remove the trails from a presentation one they have been added using the tweak components command ? These are shown on the animation but I can't seem to remove them without completely redoing the animation.
View 3 Replies
ADVERTISEMENT
Jul 23, 2013
How I can make these trails fade faster?
View 2 Replies
View Related
Jan 9, 2014
Our company recently made a huge leap forward moving from Inventor 11 to Inventor 2014. We have found an issue with Tweak Trails that we cannot seem to get resolved.
The trails are displaying on "top" of the assembly geometry in both the IPN and the IDW files. For instance if I pull a shaft our of normal position, the trail will display completely over the holding piece, instead of "disappearing" as it goes into the hole. I have a picture below that shows what we are experiencing.
Notice that the trail shown on the shaft is visible on "top" of the shaft, as well as the mating pieces geometry. We were used to seeing the trail "under" the model geometry, and only visible from the end of the shaft into the hole. Is it possible to get this visualization style back?!?
View 1 Replies
View Related
May 21, 2012
I have an Inventor presentation file (.ipn) which is displaying all the trails from the various components.
I have gone to animate and saved as a wmv video clip, the trails have been recorded with the video clip however I do not want them to be visible. Is there a way to animate / record a short wmv clip of my explosion with the trails removed ?
I know I can remove them in my IPN but I do not want to do this, I only want them to be invisible in the video clip.
View 6 Replies
View Related
May 17, 2012
I have a drawing which is referencing a .ipn model, the .ipn model has all of it's trail line invisible however the drawing is showing them all visible. What I am trying to do is find a simple and quick way to turn off the visibility of ALL the trail lines in the drawing without having to pick out each one and ajust manually, The model .ipn is quite complicated and has many trails on it so I really need a way to turn off the visibility of these in the drawing.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 6 Replies
View Related
Jun 7, 2012
I created *.ipn file and I tried to record the animation AVI file. After I finished playing the animation, I can see the AVI file was created but with 0KB, the avi is empty and cannot open.
I have no problem to create AVI file in my laptop but have such problem in my office's desktop computer.
View 4 Replies
View Related
Aug 16, 2012
When I go to animate an assembly in presentation, it will let me set the camera in the sequence view, however I can't seem to find a way to delete the camera. I put too many cameras and now the animations making too many transitions between tweaks. Is there a way to delete the set camera?
View 1 Replies
View Related
Jan 11, 2013
I have put photos in the part and the assembly but they wont show up in the presentation.
View 2 Replies
View Related
Oct 11, 2013
I have a large assembly in Inventor Pro 2012 where I'm trying to show the installation process in Presentation. Since the sequences behave as opposite to an explosion, all the parts return to their original location after a tweak.
However if I am trying to show a jig that works in the installation process that I want to show being removed, how can I do that. In the assembly, the jig is constrained to the the part being installed, which makes it very difficult to show it being removed since the move happens first then it mates to the part during an animation. Any way to reverse the animation sequence?
View 1 Replies
View Related
Aug 6, 2013
I want to assign the viability and open part commands to the marking menu in the presentation environment, but they are always greyed out. They show in the drop down menu below it though??
Screenshot attached. INventor 2013.
View 1 Replies
View Related
Nov 25, 2011
I have exploded my assembly in a presentation file, but I have not been able to record it. I have recorded videos previously, but this time the record button simply does not stay pressed. I have tried recording the video as WMV and as AVI.
View 8 Replies
View Related
Sep 3, 2012
I have made a building and would like to do some cam shots while doing a "walk" from room to room. Is this possible with a the cam on point of view angle? have tried it out with showcase but the keyframe animasjon only give me overview shots.
should i go for 3dmax or can i do it with inventor studio/showcase /publisher...
View 2 Replies
View Related
Mar 10, 2010
I've created a view in my presentation file and tweaked all my components to where I want them. How do I change the level of detail associated with a particular explosion already created? I know when you create the view you can select which representation and level of detail to use, but how do you change these after the exploded view is created?
View 6 Replies
View Related
Nov 19, 2012
We have the following problem / bug and i was wondering if others can reproduce it.
(IV2013, SP1.1)
When adding a new sub-assembly to an existing ipn, the newly added assembly doesn't have the + sign to expand it. (see image)
Steps:
1. create a part. (anything will do) - Part1
2. make an assembly and add Part1 a few times. - Assembly1
3. make another assembly and add Assembly1 a couple of times. - Assembly2
4. create a presentation file with Assembly2, add a tweak for good measure. - Assembly2.ipn
5. Save the ipn. (and any other unsaved files)
6. now go back to Assembly2 and add another instance of Assembly1.
7. look at the presentation again, if it's the same as our situation there shouldn't be a + next to the newly added instance.
View 8 Replies
View Related
Oct 8, 2013
I hid a part or something in a presentation drawing. This was within the presentation environment.
It asked if I wanted to remove associativity. I did. Now I want to put it back. How do I turn it back on? Basically, I've added new parts and they won't show up in the presentation explosion.
Inventor 2013
View 1 Replies
View Related
Mar 22, 2007
I created a IPN from an IAM for an exploded view. When I put the base view of that exploded assembly into a drawing, one of the main components is invisible. So when I mouse over the edge of the view, the bounding box does not even reach high enough to possibly include this component. All other components are visible in their correct exploded positions. I tried deleting the view and placing it again, but it does the same thing. The colored and shaded preview just before view placement shows all parts where they should be.
View 4 Replies
View Related
Oct 10, 2013
I'm creating an exploded view presentation of a large assembly. I understand that when sequences are created, the parts that are hidden at the time are added to the Hidden folder of that sequence. But since I had to work back and forth between sequences to tweak the order, I want to hide some parts that I just added and that belong to a previous sequence. The part is now randomnly hanging in space when the camera angle is trying to show another part of the assembly. How can I make parts hidden for some sequences but not other? There's no option to hide parts, only to unhide them from the Hidden folder. BTW, using Inventor Pro 2012.
Look at picture to better understand the question.
View 2 Replies
View Related
Nov 7, 2012
Is it possible to add an exploded view to a presentation file via the api? I can access existing exploded views, but did not see an add method.
View 2 Replies
View Related
Nov 27, 2013
One of my draftsman is trying to put an identification Tag on one of our assembly.We made a symbol with our tag, and we put it on whatever where trying to identify directly on the presentation.
Our problem is that where not able to remove whatever is behind that symbol so that we can make that Tag readable.Is it possible to make only part of a line invisible in our presentation?
View 9 Replies
View Related
Apr 22, 2013
I've poked around a little and made simple rules to manipulate iproperties, save filetypes, change drawing borders etc. but am now looking for a bit more and am struggling (i.e. completely lost.) I want to automate the creation of an assembly drawing from an existing presentation file. Here is the basic break-down:
Assumed Pre-Requisites:
- Using Inventor 2011
- Presentation(*.ipn) file is present and saved in same directory
- Each presentation VIEW is numbered and named (e.g. "1 - PCB Installation", "2 - Battery Insertion", etc.)
iLogic/VBA Code should:
- Select presentation file (either auto or allow user browse/select)
- Create a page in the drawing (*.idw) for each VIEW from the presentation file
- Create a base view on each page for each presentation VIEW (in numbered order)
- Each base view orientation will be derived from Saved Camera
- Each drawing page will be named using the name from the corresponding presentation VIEW name
- Each page will have a prompted entry in the Title Block that will be defaulted to the presentation VIEW name
View 1 Replies
View Related
Apr 25, 2013
I have created a presentation file. When I record it and open up the media file only half of my model is seen throughout the video. Is there any way to widen the camera view?
View 9 Replies
View Related
Jun 2, 2013
I have found some code which extracts the part number from the iproperties of a model and adds it to the custom iproperties of a drawing but this will only work on iam or ipt files.
Here's the code, I added the lines referring to the docment type as an attempt to fix the error but it didn't work...
If (ThisDrawing.ModelDocument Is Nothing) Then ReturnIf ThisDrawing.ModelDocument.DocumentType = kPresentationDocumentObject Then modelName = IO.Path.GetFileName(ThisDrawing.ModelDocument.FullFileName)End IfIf
[Code]....
View 2 Replies
View Related
Mar 22, 2013
Is it possible to have an Assembly and/or Presentation as a drawing (.dwg) with a Visual Style of Shaded with Edges? In particular my black .ipt parts look just fine with white/grey edges except when placing the view in a drawing.
View 8 Replies
View Related
Jun 18, 2012
I'm in the process of creating an exploded view of an assembly. I'm having to do this in a presentation file, and I was wondering if it was possible to section one of the parts in the exploded view. To be more specific, I have the majority of my parts spread out around another assembly in the center of the page. I want to get a three quarter section view of the center assembly so the internals are visible. Is this possble from within a presentation file and if so, how can it be done?
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 2 Replies
View Related
Feb 22, 2012
my crosshair displays the trails all the time. What can I do to resolve this problem; it's not the mouse setting.
View 2 Replies
View Related
Jun 9, 2011
So I took a photo back in January (so it can't really be reshot) and I'm having trouble removing the car(s) that appeared in the last couple of seconds on the right.
I've tried and it's not as simple as it seems (ie the road isn't just "black")
View 4 Replies
View Related
Apr 22, 2007
I come on these forums sometimes, to browse.
Anyway, I have a "fairly" advanced knowledge of photoshop,
and i finally posed myself a "particular" question on a particular "effect".
So i regestered, and here comes the nutshell (question) :
I've seen these quite often in still images, but also in videos.
They're "light" trails, like fire, but alot brighter, like night lights under a shakey mobile phone camera.
View 1 Replies
View Related
May 16, 2013
When doing architectural photography, its often desired to have motion blur on the people so as to obscure their faces. Unfortunately it needs to look realistic, and I've just been doing it by hand, but it seems like there should be an automatic way when you have two images like this:
Obviously I am able to do this by hand somewhat decently, but that's not what I'm after. I want a way to do automatic motion blur, and I want the trails to look realistic.
View 1 Replies
View Related
Apr 21, 2003
i would like to know if any one has a tutorial on how to make matrix style bullet trails/riples on an image in photoshop 7.
does anyone use 3ds max,
i would be interested on being able to do this effect on video.
View 5 Replies
View Related
Sep 10, 2012
I have 100 shots of stars. How do you combine them altogether to make star trails in CS6?
View 6 Replies
View Related
Oct 6, 2013
Just grabbed Scott's book from amazon and can't wait to get a better understanding about some of the tools I've been using. In the meantime I just noticed that I have some white trails or fine lines in an image I'm working on that appear after I have been moving things around and deleting sections etc.
It's no problem on a little image like this to run around with the brush to tidy it up and then fill white/transparent, but I'm wondering if there is there a setting or an order of working that avoids making the lines in the first place?I have filled the background in black to show the trails...
View 9 Replies
View Related