AutoCAD Inventor :: Rotate Break View - Not Horizontal Or Vertical
Jun 25, 2013I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
ADVERTISEMENT
AutoCAD Inventor :: Rotate IDW View Horizontal / Vertical
May 19, 2012In 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
Photoshop :: Rotate View But Keep Vertical / Horizontal?
Aug 14, 2012curious if there's any way to keep guides vertical / horizontal when using the rotate view feature?
View 11 Replies View RelatedIllustrator :: Rotate A Group - Line In Object Horizontal Or Vertical
Dec 23, 2012I have a grouped object with a line in it. I want to rotate the grouped object so, that the line in the object is horizontal or vertical. Now I do it by hand, this takes a lot of time.
View 1 Replies View RelatedAutoCAD Inventor :: How To See Vertical And Horizontal Dimensions Of Ellipse
Mar 12, 2012I have build a solid in which the projection of the hole on the face of the cube is an ellipse. However, as I did not create the ellipses on the faces, but the ellipses are just the result of the projection of an empty egg inside an extruded rectangle on the faces of the extruded rectangle. How can I see the dimensions of the ellipses? I tried to use the measure distance command, but with no success.
I´m attaching the model file.
AutoCAD Inventor :: Vertical And Horizontal Constraint Shortcuts
Jul 25, 2012I am having a problem with the vertical and horizontal constraint shortcuts. If I were to select a line and constrain it vertically the line becomes horizontal and vice versa.
View 2 Replies View RelatedAutoCAD Inventor :: How To Pass Break From Sectioned View To Separate Isometric View
Jun 27, 2012I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
AutoCAD Inventor :: Make Exploded View Trail Lines Exempt From View Break Out?
Oct 31, 2013I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies View RelatedAutoCAD Inventor :: Create Wheel That Can Rotate About Horizontal Axis?
Dec 2, 2011I am trying to create a wheel that can be rotate about the horizontal axis. It should have a hole for axle to fit through. However, when I try to do this it will not let me select the horizontal axis to rotate about. I also tried to rotate about a center line that I created but it wouldn't do that either..
Windows 7 64-bit (Service Pack 1)
3.40 GHz Quad Core processor w/ Hyperthreading
8GB Ram
ATI Radeon HD 6450 1GB Ram
AutoCAD Inventor :: Rotate Value(s) On Vertical Ordinate Dimension?
Apr 23, 2010How do I rotate my value(s) on the vertical ordinate dimension vertical?
View 9 Replies View RelatedAutoCAD Inventor :: How To Break Diameter Line Into Horizontal Line At End
Apr 12, 2013how to break diameter line into horizontal line at the end ?... there's no such option in editor style (I want to have 2 arrows for this diameter, not one as it is in editor options)
View 2 Replies View RelatedAutoCAD Inventor :: Get Disc (Coin) To Continuously Rotate 360 Degrees On Its Vertical Axis?
Jun 18, 2013I am trying to get a disc (Coin) to continuously rotate 360 degrees on its vertical axis.
View 5 Replies View RelatedAutoCAD Inventor :: Break View At An Angle
Jun 25, 2012Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies View RelatedAutoCAD Inventor :: Isolate Areas Of View Break?
Mar 5, 2013is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.
Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
AutoCAD Inventor :: Propagate Break To Parent View
Sep 12, 2013How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies View RelatedAutoCAD Inventor :: Broken View Break Lines?
May 5, 2006I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies View RelatedAutoCAD Inventor :: Extrude A Horizontal Small Cylinder Across A Vertical Big Cylinder
Nov 11, 2012In inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies View RelatedAutoCAD Inventor :: Drawings - Break View And Parametric Parts
Oct 25, 2012I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
AutoCAD Inventor :: 2013 Crashes During Break Out View Creation?
Aug 7, 2012I just installed Inventor 2013 (First Mistake) and when I attempt to creat a breakout view, Inventor crashes. The folks at Autodesk are blaming this on my machine running multiple threads. Aren't all modern computers supposed to be running multiple threads?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Detail View Break Line Weight
Aug 31, 2012What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies View RelatedAutoCAD Inventor :: How To Make Section View Inherit A Break Out
Oct 6, 2013I have a view of an assembly where I used a break out to break through a part. I want to make a section of this, and have that view respect that the part was broken and show it as broken in the new view.
The section view shows the full part 100% unbroken. In the edit view, the only option for cut inheritance is "break". All others are greyed out.
Why I want to do this: I am unable to break it in the section view because there is no option to break through a single part a specified distance. I cannot break an area "from point" or "to sketch" because they don't let you choose a single part for the effect, and the parts completely included in the break out this way are not going to show up in the parts list, so you cannot adjust their section participation, therefore I also cannot just break an area and then choose what parts don't get the effect.
AutoCAD Inventor :: Break Out View Glitch With Frame Generator Components?
Feb 15, 2013When creating a break out view on a top level assembly that includes frame generator components, the break out function does not break these parts out. I know it is working because the non-frame generator parts are disappearing and being broken out as you would expect but the frame generated parts seem to be immune to the command. is this a common fault or something wrong with my particular model?
View 2 Replies View RelatedAutoCAD Inventor :: Control Break Size In Drawing View Using ILogic?
Feb 24, 2011is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
AutoCAD Inventor :: How To Show Thread Boundaries In Section Or Break Out View
Oct 1, 2013I want that a section parallel and through a threaded hole will show the double lines of the thread.
Now only a hole is shown
AutoCAD Inventor :: Sketch To Create A Break Out View In One Type Of Drawing
Sep 9, 2013I use the same sketch to create a break out view in one type of drawing. I may be blind, but I can't seem to find a way to save that sketch and reuse it when I want to create a break out view.
View 4 Replies View RelatedAutoCad 3D :: Horizontal And Vertical Curved 3D Pipe
Aug 12, 2012I would like to know how to draw this pipe as shown in this picture below. Draw a 3d pipe with horizontal curve and vertical curve elements combined. Here are the design elements
for the horizontal curve for the vertical curve
radius=30.798m radius=18.000m
angle=29deg angle=60deg
The diameter of pipe that i am trying to draw is 5 meters.
3d pipe.jpg
AutoCad :: Rectangle Is Angled According To North / Not Vertical And Horizontal In MS
Jan 10, 2013The building plan has been drawn according to North, etc. When I try and draw a rectangle, for example, the rectangle is angled according to North and not vertical and horizontal in the MS.
How do I turn this off. I tried changing VPORT to 0,0 and it rotated the whole drawing with North at the top.
AutoCad :: Stretch Drawing So Horizontal Scale Is Different From Vertical
Jan 6, 2012I need to stretch a drawing so the horizontal scale is different from the vertical. The stretch command does not seem to work for this and scale only seems to allow a change in both axes.
View 7 Replies View RelatedAutoCad :: Plan And Profiles And Vertical / Horizontal Scales
Jul 2, 2013I'm setting up some plan and profiles (I DON'T HAVE CIVIL3D) with MAP3D. I have a couple of autolisp routines to work with the profile grid, but one thing that confuses me, the grid should be in paper space and the vertical scale set based on paper space, right? I'm assuming that the actual contours/polylines (once I have them georeferenced) will go in model space.
View 0 Replies View RelatedAutoCAD Inventor :: Rotate Drawing View Using ILogic
Jul 11, 2013Is it possible to rotate a drawing view using iLogic?
View 2 Replies View RelatedAutoCAD LT :: Vertical And Horizontal Lines Are Straight But Angular Ones Are Jagged?
Oct 28, 2003I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replies View Related