I am wondering if it is normal for the lines to be jagged. Vertical and horizontal lines are straight but the angular ones are jagged, Stair step looking whatever you would call it. It makes the stuff I draw look like (edited) .Especially the low angle stuff.
View 9 Replieshow do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies View RelatedI'm pretty new and have a simple problem that for some reason I can't figure it out! And that is how to make a series of lines on the image that are all perfectly horizontal or perfectly verticle. This will be part of a chart and the lines will be dividers. So the chart will have basically 21 rectangles with 3 rectangles across and 7 rectangles down.
So, I KNOW how to use the straight line tool to make the vertical and horizontal lines but I don't know how to keep the lines perfectly vertical and horizontal and parallel with each other!
"texanandproud"
I'm in a drawing file and I have some straight lines that when I'm a little zoomed out they look all jagged, but as I us my mouse scroll wheel to zoom in, the closer in I zoom the jagged line segment start to come together into one continuous line again.
Not all lines look jagged just some.
is there a setvar for this or a video card setting or something?
I use Photoshop 7 & do a lot of cleanup of bitmap/tiff images, such a logos & symbols that need cleaning up around the edges etc. Holding the shift down while drawing with a brush in eraser, etc. mode creates a straight horizontal line & that makes cleaning a horizontal edge easy & quick.
Is there any keystroke combinations that will draw a perfectly straight vertical line?
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
On my LED monitor (Samsung XL2370), horizontal and veritcal lines display as different hues. Is there an Autocad setting to work with this or is it maybe some setting on my monitor?
View 1 Replies View RelatedI am begineer in autocad. I have to draw plot margin like ractangle having 2 horizontal line and 2 vertical line. on vertical line i want to put letters from A,B----- and on horizontal line 1,2,3,----.
View 8 Replies View RelatedI am making revision clouds on some record drawings. They come out all peachy, but when I save the file and reopen it, all of the wonderful little clouds change to jagged straight lines.
View 5 Replies View RelatedHow can I add a layer of horizontal and vertical guide lines? I can't seem to find that option.
View 2 Replies View RelatedI moved an object I was creating to the artboard. In doing so, it reveals pink & red vertical lines around all the elements within the object. Each line section has a mini pink or red box with a number at the top corner and what looks like a histogram?What is this information and how do I remove it?
View 2 Replies View RelatedI have the beta installed but I also installed the trial of CS6 on another computer.. Both do the exact same thing with the Adaptive Wide Angle filters. I set a line as straight, mark as vertical (2 lines really) and then process. The lines that are vertical come out wavy... best way to describe it..
I add the 2 control lines to the very outside most windows where the windows meet the brick... This is a closeup of the output... I don't know when straight lines became waveforms.. but they do with this filter!
Why does my angular dimension have a straight dimension line instead of curved?
View 4 Replies View RelatedWhat should I do to “Layer 1” (the single image) to get-rid of those Horizontal and Vertical lines from pattern? While repeating as the Background Image into the HTML page, those Horizontal and Vertical lines does not look nice.
View 5 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View RelatedWhy the lines sometimes get angular when I draw a circle/curve? How can I make them round?
View 8 Replies View RelatedI would like to know how to draw this pipe as shown in this picture below. Draw a 3d pipe with horizontal curve and vertical curve elements combined. Here are the design elements
for the horizontal curve for the vertical curve
radius=30.798m radius=18.000m
angle=29deg angle=60deg
The diameter of pipe that i am trying to draw is 5 meters.
3d pipe.jpg
In 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
I have build a solid in which the projection of the hole on the face of the cube is an ellipse. However, as I did not create the ellipses on the faces, but the ellipses are just the result of the projection of an empty egg inside an extruded rectangle on the faces of the extruded rectangle. How can I see the dimensions of the ellipses? I tried to use the measure distance command, but with no success.
I´m attaching the model file.
The building plan has been drawn according to North, etc. When I try and draw a rectangle, for example, the rectangle is angled according to North and not vertical and horizontal in the MS.
How do I turn this off. I tried changing VPORT to 0,0 and it rotated the whole drawing with North at the top.
I am having a problem with the vertical and horizontal constraint shortcuts. If I were to select a line and constrain it vertically the line becomes horizontal and vice versa.
View 2 Replies View RelatedI need to stretch a drawing so the horizontal scale is different from the vertical. The stretch command does not seem to work for this and scale only seems to allow a change in both axes.
View 7 Replies View RelatedI'm setting up some plan and profiles (I DON'T HAVE CIVIL3D) with MAP3D. I have a couple of autolisp routines to work with the profile grid, but one thing that confuses me, the grid should be in paper space and the vertical scale set based on paper space, right? I'm assuming that the actual contours/polylines (once I have them georeferenced) will go in model space.
View 0 Replies View RelatedI can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
I've read about a command before which can copy entities with increment via specified distance, horizontal or vertical. Now I need it but can't figure out what was that command.
View 4 Replies View RelatedWhat is the industry standard regarding horizontal vs. vertical scale? More specifically, should the exaggerated vertical scale be proportional to the horizontal scale?
For example, if I have a drawing that has a horizontal scale of 1" = 100', should my vertical scale be 1" = 10'? Or if my horizontal scale is 1" = 30', should my vertical scale be 1" = 3'? Obviously, we have the ability to make the vertical scale anything we want but what is there a recognized industry standard that correlates the horizontal scale to the vertical scale?
Is it possible to create a viewport with a different horizontal and vertical scale? I want to create a horizontal scale of 1"=40'-0" and a vertical scale of 1/4"=1'-0". Is this possible?
View 2 Replies View RelatedMy question is "Can I create surfaces, profiles, & alignments using AutoCad2012?"
I know if I had Civil3D2012 I could do it, but can it be done with the Regular version I should say.
At my previous job I was using Civil3D2010 (darn economy Government job did lay offs) and now I'm using CAD2012 with new employer and I'm realizing that there are a lot of functions/commands that I don't have.
Is there any way to make a vertical or horizontal section plane of 3d solid leaving the rest of it like a solid?
Often I need to do pretty much complex view in which the same solid should be sectioned for half part of it and be solid for the rest. It is a common way to present solid draw but I can't do it with autocad 2013.
I have around 20 differently sized layers that I am trying to arrange into a straight horizontal line. I want them next to each other so that one layer's right edge is the same as the next layer's left edge. I also want them all on the bottom edge of the image. I've tried the Align tool and the Align Visible Layers option under Image, and neither have worked.
View 4 Replies View RelatedI am trying to model a force main with several vertical and horizontal bends. Getting the network set up and drawing in the pipe segments with the styles is a sinch, what I am having trouble with is modelling the horiz and vert bends to show up both in plan and profile view. I have done many sany and storm profiles but this is a first time with a force main. Does Civil 3d have the capability of modelling these or is this more of an MEP type task?
View 4 Replies View Related