AutoCAD Inventor :: Isolate Areas Of View Break?
Mar 5, 2013
is there any way to control which areas of my part or assembly that I want to use the View Break on? Currently I'm not aware of any options. It wants to break through the entire assembly or part view.
Basically I have a coworker who designs his electrical harnesses in Inventor. Some of the wiring branches off the main harness are longer than others and he would like to break only that specific branch of wiring, not the entire horizontal or vertical area of the view.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
View 1 Replies
ADVERTISEMENT
Jun 27, 2012
I started with a Left side view of a part and created a sectioned view right down the middle so you can see the insides from another view. the part is pretty big so i used a Break to shorten it to fit the page. I also placed a smaller and separate isometric view of the same part and want this view to inherit the same break. How can I do this? If I go into the display options of the iso view, all the cut inheritance options are grayed out and can't be clicked. I've seen this done before, but i'm sure i missed a step somewhere.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 4 Replies
View Related
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related
Aug 13, 2012
I don't find a way to isolate and undo isolate an occurrence in Assembly, looking for the right code in VB.
View 4 Replies
View Related
Jun 25, 2012
Any trick to make create a break view along a sloping edge.So that the view still appears continuous rather that the one.
View 3 Replies
View Related
Sep 12, 2013
How do you turn off the default check for "Propigate to parent view" when creating a breal in a drawing view. I have never had the need to use this option yet it is checked by defalt.
View 8 Replies
View Related
May 5, 2006
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies
View Related
Oct 25, 2012
I have a parametric assembly and some of the parts in this assembly require a "Break". When the part dramatically reduces in size the part view disappears as the part is now located in the "Break". Delete the "Break", re apply the "Break".
I would like to be able to constrain a Break to the part, either a sketch on the view or maybe from Workplanes in the part.
View 3 Replies
View Related
Aug 7, 2012
I just installed Inventor 2013 (First Mistake) and when I attempt to creat a breakout view, Inventor crashes. The folks at Autodesk are blaming this on my machine running multiple threads. Aren't all modern computers supposed to be running multiple threads?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 4 Replies
View Related
Jun 25, 2013
I can only get horizontal or vertical 'orientation' in "Break" view.
How do I rotate it to say 60degrees to use on an iso view?
View 2 Replies
View Related
Aug 31, 2012
What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies
View Related
Oct 6, 2013
I have a view of an assembly where I used a break out to break through a part. I want to make a section of this, and have that view respect that the part was broken and show it as broken in the new view.
The section view shows the full part 100% unbroken. In the edit view, the only option for cut inheritance is "break". All others are greyed out.
Why I want to do this: I am unable to break it in the section view because there is no option to break through a single part a specified distance. I cannot break an area "from point" or "to sketch" because they don't let you choose a single part for the effect, and the parts completely included in the break out this way are not going to show up in the parts list, so you cannot adjust their section participation, therefore I also cannot just break an area and then choose what parts don't get the effect.
View 3 Replies
View Related
Feb 15, 2013
When creating a break out view on a top level assembly that includes frame generator components, the break out function does not break these parts out. I know it is working because the non-frame generator parts are disappearing and being broken out as you would expect but the frame generated parts seem to be immune to the command. is this a common fault or something wrong with my particular model?
View 2 Replies
View Related
Feb 24, 2011
is there any way using iLogic or other method to automatically control the size of the 'break' in a drawing view? I have built a model which uses iLogic to control virtually everything, however the large variations in the length of the product mean that there are some interesting results when it comes to the broken drawing views updating.
it would be nice to locate the break at the absolute center of the view and then size it as a percentage of the view size along one axis or perhaps according to some other length based rule.
Dell Precision M6400 - C2D 2.66 / 8gb / Quadro FX3700M / Win 7 Pro x64
View 9 Replies
View Related
Oct 1, 2013
I want that a section parallel and through a threaded hole will show the double lines of the thread.
Now only a hole is shown
View 1 Replies
View Related
Sep 9, 2013
I use the same sketch to create a break out view in one type of drawing. I may be blind, but I can't seem to find a way to save that sketch and reuse it when I want to create a break out view.
View 4 Replies
View Related
Jul 10, 2012
leaving the isolate mode in a camera view (3dsmax-camera or vrayphysical-camera) changes the view from cameraview to perspective view. Am I missing any new setting or ist this a bug...
View 3 Replies
View Related
Apr 13, 2013
see attached graphic
simple road widening section
subassembly from centerline is LINKOFFSETONSURFACE out to a target alignment
next sub is good old LANEINSIDESUPER, using depths for PAVE1DEPTH and SUB-BASEDEPTH
the corridor definition under SURFACES specifies top links for both PAVE1 and SUB-BASE surfaces, but they appear to ignore that and cut across the road (see graphic) making a mess of it
do I need to add a link code to LINKOFFSETONSURFACE subassembly? other work-around?
View 3 Replies
View Related
Mar 19, 2010
Is it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
View 6 Replies
View Related
Feb 10, 2012
So I've created this wall section and used viewbreaks to break the crop regios up so i can fit the final view on a sheet.The problem is, when I place the broken up section on a sheet, the viewport does not break up like the view region.
How do i break up the viewport on the sheet so I can squeeze the visable regions together?
View 2 Replies
View Related
Aug 15, 2011
I have a drawing (autocad 2011) ,which i have to measure the areas of the many rooms and i arrange these areas in a table! is there any fast way to do so? avoiding the boaring typical area measurements room by room?
View 9 Replies
View Related
Aug 21, 2013
I'm using Inventor Pro 2011 and I'm trying to break the association of a BOM from it's assembly. My company uses a "next assembly list" on each drawing to show the quantities and information that appear on the BOM in the next level assembly. To achieve this we insert a parts list referencing the next level, then we turn off the visiblity of all the parts except the item we want shown. The problem we've found with this is that we're using some large assemblies and Inventor slows down when it has to reference the large assembly on each drawing. All we really want to show is the single line. If we break the link to the large assembly, we feel that it will speed up the process considerably.
View 5 Replies
View Related
Dec 21, 2011
How to Create a dimbreak like Autocad in Inventor idw
View 2 Replies
View Related
Feb 15, 2012
Is there anyway to use the break-out command in an IDW to show something inside an enclosure that you normally would not see? I don't mean a section view but an Isometric view that temporarily removes a part of the wall of an enclosure so you can see what is inside, specifically in a presentation view?
View 5 Replies
View Related
Sep 22, 2011
What is the difference between rooms and areas? Why create an area schedule off 'areas' as opposed to using 'room' areas? Can you create a schedule off room areas?
View 2 Replies
View Related
Jan 29, 2013
In the image below I have an aerial photo of an Island. I need to make it so as water areas are black and land areas are white (not greyscale) almost like a silhouette. My first plan was to draw round the island with a black paint brush and then use the "bucket fill" with a suitable threshold to fill all of the areas up to the black outline with black, however this doesn't work as the bucket fill either breaks through the black line or when I reduce the threshold, doesn't color the water areas solidly.
View 3 Replies
View Related
Jun 6, 2009
I'll make the important parts bold.
View 3 Replies
View Related
Jan 17, 2013
I have several sheets w/in a drawing. Some of the sheets are titled sheet 2A, 2B, etc. I'd like to be able to do this w/o needing several title blocks. what becomes sheet 3 is now sheet 5. How do I offset the sheet numbers?
View 2 Replies
View Related
May 27, 2013
Is it possible to break my bolted connection, so that i can change the information given by inventor in the BOM? Its always grayed out and i can`t seems to find a way to make it "ungrayed".
I could change it directly on the .idw but me and my project leader would like to not go on that road. Our teams are seperated in to two. Ones in charge of modeling & the other is in charge of the presentation. We would like to give, as much as possible, not to much leeway on those in charge of the presentation.
View 3 Replies
View Related
Mar 24, 2011
Who can tell me if Break lines in Inventor 2012 will be constrainable? I mean come on... All the new fancy stuff Inventor gets every year is great but when will the simple things get done?
View 9 Replies
View Related
Jan 11, 2014
I´m drawing a component which does not fit within the drawing sheet. How can I reduce its space on the sheet, while keeping the dimension equal?? I know I can use a Break, but I really can't suceed into using it.
View 9 Replies
View Related
