AutoCAD Inventor :: Get Lines And Curves In Particular View?
Jan 24, 2012
I would like to have dimensions on a particular view based on selected lines and curves.
How to get the line and curve's start point and end point for me to use in dimensioning either linear or baseline?
View 1 Replies
ADVERTISEMENT
Oct 31, 2013
I have made an exploded view and placed it an a drawing. I would like to view inside one of the bodies to show where the exploded internals sit, however when I do a break out of the body the trail lines from the exploded internals also get sectioned. Is there a way to control the sectional properties of a trail line?
View 4 Replies
View Related
Aug 17, 2003
how do I make straight lines? Horizontal Lines? Vertical Lines? Curvs? I read many tutorials and i am afraid that I am doing it the wrong way, my way is to drag a guide to where i want the line to be at and trace the guide with the brush tool...
View 2 Replies
View Related
May 30, 2012
inventor 2012. for instance for a aux. view if it is not in-line with the parent view it puts a section line. is there a way to have a single view arrow?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
slphantom (NNTP handle: scottl)
View 4 Replies
View Related
Oct 26, 2011
Is it possible to show hidden lines in one part of a .idw view while the rest of the view does not show hidden lines? In the attached image I want to show the pull handle and towel bar through the glass in the door. The only way I know how to show this currently is to turn off the visibility on the glass.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 2 Replies
View Related
Aug 23, 2012
I have several cropped views in an Inventor 2013 drawing. I was wondering if Inventor could auto add a cut line to the cropped edge of objects when creating these views or alternatively if I would have to manually add a cut line through the symbols library ?
View 5 Replies
View Related
May 5, 2006
I have a part that when I adjust its length additional fabs are needed. Now in my idw for this part I want to secure the break lines on the part at a exact distance from the end / each other to display these fabs. Is there a way to parameterize or set the break lines so they adapt to the change in length and move accordingly?
View 3 Replies
View Related
Dec 1, 2011
i've got this snowboard rack that i need to layout/markup with some #8 machine screw holes (with countersink for tapered wood screw head) - two on the end of each stretcher to fasten them to the uprights - 8 in total. I also want to layout 8 more holes on the stretchers themselves. I've got some center holes marked in the sketches..but they're not visible when i activate the hole feature so i can properly place the holes?
why i can't extrude the 4 spacers i've got sketched on the back of the stretchers into a solid . . . . i can only cut?
View 6 Replies
View Related
Aug 6, 2012
Attached shows lines (Parts) are intersecting each other in drafting mode. I have tried all but I am not able to resolve this issue.
View 1 Replies
View Related
Oct 24, 2011
Is there a way of using Ilogic to make hidden lines of specific parts in an assembly drawing view visible? If a part with hidden lines showing is suppressed and then unsuppressed the hidden line option becomes unchecked, therefore I need a way of rechecking this option through code?
View 2 Replies
View Related
Apr 25, 2013
Civil3d 2012 - is there a way to project standard autocad lines and curves to an existing surface to the lines and curves end up with the surface elevations? we are trying out that wants 3d lines exported in a dxf file. We have a surface and we have the lines...it's just that the linwork is all at 0 elevation.
View 2 Replies
View Related
Sep 9, 2013
Can we automatically add sample lines at vertical curve points (e.g. BC, EC, Bottom of curve) ?I need to show the sections at these vertical curve key points.
I am using C3D 2011 but could not find that option when creating sample lines in a station range.
View 2 Replies
View Related
Aug 20, 2012
I am having trouble presenting segmented lines with a dashed line type in AutoCadMap 3D 2011. When the segments are small (as in curves) the dashes float together and the lines appear to be continous. This is not the case in for example TopoCad and ArcGIS.
Is there some kind of system setting in AutoCad where you can chose drawing technique? So that the dashed line segment starts with the blank part instead of the dashed?
View 2 Replies
View Related
Oct 29, 2012
I have a rather weird problem. I am using .dxf files as digital overlays on a new optical comparator we recently purchased. The problem is, the cad files we used to create our old mylar overlays is both 3d and comprised of text/curves/dimensions. I figured out the flattening and turning the text into lines and curves, but I cannot find a method to change the dimension graphics (profile boxes, length dimensions, and angle dimensions) into lines and curves.
When I import them into the comparator program only the lines and curves can be displayed on the comparator. Is there any way to flatten and make all of the dimension graphics lines and curves?
View 9 Replies
View Related
Aug 17, 2013
can't seem to find the option, drag panel larger instead.
View 1 Replies
View Related
Mar 20, 2006
If I write something on a t-shirt how do you get the text to look like it is really on the t-shirt, following all the folds in the shirt, not just text on the shirt.
View 3 Replies
View Related
Mar 9, 2013
sometimes Photoshop (Intuos 4, AMD Phenom2 X6 1100T@3.333GHz) draws a hard line at full pressure instead of a soft, dynamic curve. It simply connects the starting and ending point. Painting ia 20000x14000@16GB Ram with PS using 12GB, painting size 6GB.
I also experienced when going back history states with ctrl-alt-z the tool automatically switches to zoom, and sometimes history just jumps back to the latest state.
View 2 Replies
View Related
Sep 16, 2012
Is it possible to warp a Smart Objects using corners and straight lines in stead of curves? I try to make a map icon in which you can easily replace the image on the map. I know how to do this warp with paths by adding anchors, but it won't work with a Smart Object (or a simple image for that matter)
It should look like the right image:
If I try to do it by splitting the image and transform them like on the left image, the transition between the 'panels' isn't correct.
View 4 Replies
View Related
Feb 6, 2013
Looking for a nice script that can search a complex design with lots of linework and find all coinciding duplicates and select them all and delete them but leave (1) good copy.
Basically when I use Outline Pathfinder in Adobe Illustrator, then bring back into corel, sometimes get a lot of redundant objects. I already set the settings in Adobe Illustrator to minimize that as much as possible.
View 2 Replies
View Related
Dec 26, 2012
In a drawing I'm looking for components that have a certain iProperty. If they have the iProperty, I want to turn every occurrence of that item red.
I can get the occurrences fine, but I'm unable to properly get the drawing curves so I can turn them red. I'm using code from this post on ModTheMachine: [URL]........
Here's my
private static void ProcessAssemblyColor(DrawingDocument aDoc, ComponentOccurrences occurrences){ foreach (ComponentOccurrence occ in occurrences) { if (occ.DefinitionDocumentType == DocumentTypeEnum.kPartDocumentObject) { TransientObjects transObjects = StandardAddInServer._mInventorApplication.TransientObjects; LayersEnumerator layers = aDoc.StylesManager.Layers; Layer colorLayer = layers[1]; colorLayer.Color = transObjects.CreateColor(255, 0, 0); //red [code]........
I've seen some things say I need to use an out object to use DrawingCurves. If that's true, I'm not sure what to put for the first variable.
object outObject;DrawingCurvesEnumerator drawingCurves = drawView.DrawingCurves[occ.CreateGeometryProxy(whatgoeshere?, out outObject)];
View 1 Replies
View Related
Sep 29, 2010
I'm new to Inventor. I'd like to create some text, and then convert it to lines and arcs. I can't find any way to do this, and now I'm wondering if this very simple task is even possible in Inventor?
View 6 Replies
View Related
Oct 6, 2011
i am new to inventor, but an alias user for many many years . Since alias and inventor do seem to communicate pretty well, i gave it a shot, since it has many advantages to use the 2 of them.
So, the simple question is: How do I duplicate and edge of a surface into a curve, from say, a imported wire file.
I cant find a way.....Looks so simple the interface and what it makes, that it ends up being difficult to me such simplicity.
View 1 Replies
View Related
May 16, 2012
Is there a way to get rid of lines in realistic 3d view. I want it to look smooth.
View 5 Replies
View Related
Dec 16, 2011
I know there is ipn file to create an exploded view. But if I have used a positional rep to create one. How can I automatically show the tweak lines or center lines on explode path
Inventor Professional 2013
Vault Collaboration 2013
View 2 Replies
View Related
Aug 4, 2013
Is it possible to have a tangent constrain on multiple curves?
see enclosed rough sketch, i would like the curved free end or the arm to be in constant contaced with the wavey top line on the other part, the wavey line is constructed as 3 curves but i can only get the tangent constrain to apply to one of the curves.
i would like the tangent constraignt to move between the curves so the part stays in constant contact with the wavey line. this is just a mess about sketch i suppose a real world instance will be a wheel following a shaped cam plate.
View 2 Replies
View Related
May 27, 2012
I use INV 2013 (Premium product and not ultimate). I am not used to creating complex surfaces. I have come across a situation, where I need extend the edge of the part as shown. (Like a press tool form die and form punch surface. In other words, 3d part edge is the parting line of mould and extend around for the die surface.
View 9 Replies
View Related
Sep 17, 2013
I created a 2D planar sketch, now I need to create a 3D sketch and Helical curves, but as I enter into the 3D sketch mode, I cannot perform any functions, all my tool bar options are grayed out?
I am running 2014 Pro Design Suite.
View 2 Replies
View Related
Aug 6, 2013
Is there a way in iLogic to iterate through all curves on a drawing. We manually apply radii labels to each drawing view but would like to automate the process with iLogic. How could I reference and cycle through all the radii on my drawing view?
View 2 Replies
View Related
Dec 6, 2013
Given a sketch, I wish to get its profile paths (outer, plus inners), for each path, I wish to get their individual curves (line, arc, splines, any type). For lines, I need start and end points, for others, some sample points would do.
For "T" like thin profile shape, following code got me, 1 Profile Path, which had 8 Lines (thus 8 points) and it worked fine.
For Each path As Inventor.ProfilePath In extFeature.Profile
If Not path Is Nothing And path.Count > 0 Then
For Each entity As Inventor.ProfileEntity In path
If entity.CurveType = Curve2dTypeEnum.kLineSegmentCurve2d Then
Dim oSkE As SketchEntity = entity.SketchEntity
Dim oLine As SketchLine = CType(oSkE, SketchLine)
Dim startpt As Inventor.Point2d = oLine.StartSketchPoint.Geometry
Dim endpt As Inventor.Point2d = oLine.EndSketchPoint.Geometry
But same logic does not work (crashes at Casting I guess) for "S" shape as below:
It gives path.Count == 0.
View 9 Replies
View Related
Jan 28, 2013
Is there any way to make 2 to sketch lines instead of floating lines so that I can dimension them?
For example, if I have a part that can change lengths and I need to print off a new drawing, it would be good if I could say that the lines were a set distance from each end of the part or some features of the part.
Then I could update the part length, then just open the part drawing and not have to adjust anything.
View 1 Replies
View Related
Jun 21, 2013
Is there a way to get sheet number of the base view for the Selected Child view (Mainly for Section. Detail Views). Because the Section views, Detail views (initially they would have created on the same sheet where the parent is, then they moved to different sheets). So we place the parent view sheet number.
View 1 Replies
View Related