i am new to inventor, but an alias user for many many years . Since alias and inventor do seem to communicate pretty well, i gave it a shot, since it has many advantages to use the 2 of them.
So, the simple question is: How do I duplicate and edge of a surface into a curve, from say, a imported wire file.
I cant find a way.....Looks so simple the interface and what it makes, that it ends up being difficult to me such simplicity.
I can't figure out how to duplicate the patterned edge on this pic (see attach).
View 1 Replies View RelatedMany users forget or even aren't aware of the fact that they can't have duplicate names for elements. Or in a long list of elements, they don't oversee which names are already in use. So they try to change the name, but it does not 'stick' (the name reverts immediately to what it was).
Of course it should be (or become) general knowledge and a good care that duplicate names won't occur, but just like with the prompt that warns for unallowed characters (spaces and all), it would be nice to prompt the user that there's a duplicate name.
I have a rectangle (Named "Data") that falls down the stage on a loop. This is all contained within the symbol itself. The stage has this code in it:
var randX;
var randShouldWait;
var randSpeed;
[Code].....
This creates a nice looking randomized "shifting" as the block falls. The issue is that this code is specifically related to the "Data" object and when I duplicate the symbol it names it "Data_1" which obviously doesn't shift randomly. The goal is to have this expandable to have dozens of these rectangles at once, so Ideally I'd like to find a way to create new ones programmatically that each have individualized behavior so my timeline isn't so busy.
modeling a car in 3ds max on youtube : URL....
in this video he uses holding shift and drag the edge to duplicate/copy the shape but when i want for example create a box,convert to editable poly and select edge and holding shift and drag it not working for me.i remove the face and use only the edges and it works but on that video he has 3d shape and not remove the face! i have 3ds max 2013.
Is it possible to duplicate sheets and views with ilogic.
I coudn't find any module in the ilogic browser that does something similat to duplicating.
In a drawing I'm looking for components that have a certain iProperty. If they have the iProperty, I want to turn every occurrence of that item red.
I can get the occurrences fine, but I'm unable to properly get the drawing curves so I can turn them red. I'm using code from this post on ModTheMachine: [URL]........
Here's my
private static void ProcessAssemblyColor(DrawingDocument aDoc, ComponentOccurrences occurrences){ foreach (ComponentOccurrence occ in occurrences) { if (occ.DefinitionDocumentType == DocumentTypeEnum.kPartDocumentObject) { TransientObjects transObjects = StandardAddInServer._mInventorApplication.TransientObjects; LayersEnumerator layers = aDoc.StylesManager.Layers; Layer colorLayer = layers[1]; colorLayer.Color = transObjects.CreateColor(255, 0, 0); //red [code]........
I've seen some things say I need to use an out object to use DrawingCurves. If that's true, I'm not sure what to put for the first variable.
object outObject;DrawingCurvesEnumerator drawingCurves = drawView.DrawingCurves[occ.CreateGeometryProxy(whatgoeshere?, out outObject)];
I'm new to Inventor. I'd like to create some text, and then convert it to lines and arcs. I can't find any way to do this, and now I'm wondering if this very simple task is even possible in Inventor?
View 6 Replies View RelatedI would like to have dimensions on a particular view based on selected lines and curves.
How to get the line and curve's start point and end point for me to use in dimensioning either linear or baseline?
Is it possible to have a tangent constrain on multiple curves?
see enclosed rough sketch, i would like the curved free end or the arm to be in constant contaced with the wavey top line on the other part, the wavey line is constructed as 3 curves but i can only get the tangent constrain to apply to one of the curves.
i would like the tangent constraignt to move between the curves so the part stays in constant contact with the wavey line. this is just a mess about sketch i suppose a real world instance will be a wheel following a shaped cam plate.
I use INV 2013 (Premium product and not ultimate). I am not used to creating complex surfaces. I have come across a situation, where I need extend the edge of the part as shown. (Like a press tool form die and form punch surface. In other words, 3d part edge is the parting line of mould and extend around for the die surface.
View 9 Replies View RelatedI created a 2D planar sketch, now I need to create a 3D sketch and Helical curves, but as I enter into the 3D sketch mode, I cannot perform any functions, all my tool bar options are grayed out?
I am running 2014 Pro Design Suite.
Is there a way in iLogic to iterate through all curves on a drawing. We manually apply radii labels to each drawing view but would like to automate the process with iLogic. How could I reference and cycle through all the radii on my drawing view?
View 2 Replies View RelatedGiven a sketch, I wish to get its profile paths (outer, plus inners), for each path, I wish to get their individual curves (line, arc, splines, any type). For lines, I need start and end points, for others, some sample points would do.
For "T" like thin profile shape, following code got me, 1 Profile Path, which had 8 Lines (thus 8 points) and it worked fine.
For Each path As Inventor.ProfilePath In extFeature.Profile
If Not path Is Nothing And path.Count > 0 Then
For Each entity As Inventor.ProfileEntity In path
If entity.CurveType = Curve2dTypeEnum.kLineSegmentCurve2d Then
Dim oSkE As SketchEntity = entity.SketchEntity
Dim oLine As SketchLine = CType(oSkE, SketchLine)
Dim startpt As Inventor.Point2d = oLine.StartSketchPoint.Geometry
Dim endpt As Inventor.Point2d = oLine.EndSketchPoint.Geometry
But same logic does not work (crashes at Casting I guess) for "S" shape as below:
It gives path.Count == 0.
I am trying to draw a series of flow channel (in a row) in a rectangular parallelepiped.
So I sketched a rectangle -> extruded (cut) -> sketched another rectangle -> extruded -> sketched another rectangle inside of one of channel -> extruded, and finally made a flow channel like in attached file.
What I hope to know are :
(1) Is there a way to copy that flow channel? Or should I have to do same repeatedly for tens of flow channel?
(2) Is there a way to make a flow channel easily?
When I duplicate the Material in the Material Browser all appearance and Physical properties are duplicated too.
So I must accept or assign the new unique names for appearance and Physical purposes of Material.
In my case I need, for example, the same Material with different appearance, for example knurled and regular.
I cannot save the new Material with existing Physical properties name and it makes unwanted copies like Steel(1), Steel(2) in Assets.
After I made a copy I can reassign the Physical properties back to existing but it takes a time of replacing assets and deleting unwanted copies.
Is it possible to make a copy within the same Physical Assets?
The part in the attachment was made in catia. The main face is curved in two directions. In my language we call this a "double curved surface" this is possible to generate a flat pattern from in catia. How to do this in inventor?
View 3 Replies View RelatedI have created a bin/vat/tub using sheet metal. I started with a contour flange. I then copied the sketch and pasted into a new sketch off the flange for a contour roll feature. Then a flange, roll, flange, roll, flange and roll. My trouble starts at the last flange. I'm trying to construct the flange exactly as I have created the features before. I set the distance, select the profile (it shows the flange on the screen), hit apply and that's when my message shows up. "Non-tangent curves found in path: flat pattern cannot be correctly created. Edit sketch and add constraints to the curves. The sketch is fully constrained according to the lower right hand corner and the auto constrain button.
View 2 Replies View RelatedI am preparing a batch of images for test submission, for a stock photo library.Recently a person working for one of the visual effects studios in London happened to tell me that these strict agencies use some set of layers that can separate tonality and color values to check for banding, dirtiness, noise and all those technical flaws that the human eye can't notice on a monitor.He said they perhaps have an action for it so that they can review faster.
He said that it is known as 'Craze Curves' or 'Visibility Curves' technique.He further added that all the studios use it before giving the final files to clients so that there is no issue in printing afterwards.It is sort of a quality control check and has been used by digital and advertising agencies all over the world.
But now his email seems to have changed and I can't get in touch with him to know how to use the technique.
An IPN file is showing multiple assembly files in it's browser even though I have confirmed there is only one of the assemblies in the IAM file.
I'm not sure if it's causing any real difficulty in the IDW views but it's not giving me any confidence.
When is the poor, undercared-for part of the software going to get an overhaul?
Many times I see that these types of irregular shapes which comprise of spline curve are created with very less or no dimensions, so I want to know how this spline curve was created and can be controlled, if I want to create it in an exact manner what dimension I should use ?
View 2 Replies View RelatedHow to curve a piece of sheet metal over the outside curved edge of the attached part. I can do it the old fashioned way but was wondering if it could be done in sheet metal which would give me the flat pack automatically (that way there is less chance for errors). There are several of these baffles joined together by a spine and the sheetmetal will eventually go over all of these, and have a few modifications to shape the end profile.
The outer curve is a spline which has changing radius and hence to use a contoured roll would be rather difficult and time consuming (there are also some flat sections at each end of the curves as well).
Autodesk Inventor Professional Student 2013 is the version I'm using.
Is there a way to use the curve driven (rectangular) pattern referencing two tangent curves (an arc and a tangent line). I'd like to be able to create this pattern of slots in one pattern, otherwise I'll have to make two cut features at each end and use one pattern for the straight and another for the curve.
View 6 Replies View RelatedI want to duplicate a solid body 4 times in a part file. i did that by going for circular pattern. But after creating that, i had to add on few more features. I did that in parent solid body. then I noticed that other 3 solid body is not getting updated. I know in assembly file it gets updated but any way in part file.
View 3 Replies View RelatedI'm trying Frame Generator one last time to design the custom frames we build for our equipment. I've always had problems with getting FG to generate the right part numbers and file names. I have the part numbers figured out, but does Frame Generator still not have a good way to automatically create unique file names for frame members? If no one can get it to automatically generate unique file names, how do you manage all of the duplicate file names generated over time?
View 1 Replies View Relatedwhy content center creates duplicates of existing folders?. Some of the folders have 6 or 8 versions and there is also a duplicate EN-US folder within the EN-US folder with nested folders. So bottom line i have multiple locations and nested files within the content center. Needless to say there is a lot of time spent pointing inventor to the parts necessary to open an assembly.
We are working on a network and are all pointing to the same content center location. We are all using the same project files. Sometimes it works as you would expect, other times not.
Windows 7 64 bit
Inventor 2012 Professional
Dell T1600 CPU E31245 @ 3.30GHz
8 GB RAM
So I'm in the midst of redoing my Sheet Metal Rules, and custom materials, since the update to 2013 kind of destroyed that. I created a new material library, to house all of my custom Materials in. I set it to be the only Material Library in the project, so now when I open up a file in that project, I only see my Custom material list, and that works fine when I go into the iProperties as well, the material list shows up correctly.
But when I go into the Styles Editor, and go to add my new custom Materials to my Sheet Metal Rules, the list of materials is shown in duplicate. I have attached a couple of screenshots of me opening the iProperties, and the Sheet Metal Rules in the same file.
I am trying to create different bend tables for different thickness material. If I have two radii that are the same for different thicknesses it gives me an error message on the second one that it is a duplicate column heading value. The values of the bend table are dependent on the thickness of the material. Why can't I have several different thicknesses with the same radii?
View 1 Replies View RelatedAPI enhancement/fix in SP1: Cannot create a radius dimension on circular drawing curves projected from spline edges.Does it in some way trying to refer to the issue with nonplanar arcs turning into splines in drawings saved-as AutoCAD .DWG?
View 3 Replies View RelatedI have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedWe got a 3d printer and I've been doing a lot of basic designs, right now Im having an issue with trying to figure out how to cut a notch (if that is even the correct wording) in the edge of a plate.
View 2 Replies View Related