AutoCAD Inventor :: Edge Won't Fillet
Feb 19, 2012I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Fillet Part Of A Face Edge?
Sep 20, 2011I need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
AutoCAD Inventor :: Fillet Would Fail - Changed Length Of The Edge
May 8, 2012I don't understand why this Fillet would fail when it was fine before I changed the length of the edge. See before and after shots attached..
The geometry/features that are used to create the fillet are exactly the same.
AutoCAD Inventor :: Fillet Flat Surface To Rounded Edge?
Nov 14, 2013I am building a Crankshaft. How to build the connecting weights that attach the main journals to the connecting rod journals. I can post a screenshot of the design. I have a extruded face that is a half circle on the top.so I am trying to fillet or cut a section off of the rounded edge. I have tried to build tangent workplanes and projecting geomety, but to no avail.
View 9 Replies View RelatedAutoCad 3D :: Fillet Box - Rounded Edge Is On Inside Instead Of Being On Outside
Dec 6, 2011I am working on a project for an autocad class and have run into a snag. I have to fillet a box but the rounded edge is on the inside instead of being on the outside. I'm attaching a screen shot of a 2-d version and the 3-d I have so far.
View 3 Replies View RelatedAutoCad 3D :: Put 5 Mm Radius Fillet On Upper Edge?
Jan 15, 2013I want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedAutoCAD 2013 :: Fillet Edge Of Extruded Spline Shape
Aug 16, 2013Autocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
AutoCAD Inventor :: Fillet Connecting Wrong
Oct 11, 2013I am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
AutoCAD Inventor :: How To Make 3 Mm Fillet In Other Direction
Dec 7, 2011How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies View RelatedAutoCAD Inventor :: Fillet Weld Around Corners
Mar 14, 2012Is there a way to create smooth transitions for fillet welds for around corners?I have to create four separate fillet welds on all sides of the mating pieces and it breaks at the corners.
View 2 Replies View RelatedAutoCAD Inventor :: Fillet In Eccentric Reducer?
Sep 23, 2013What kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies View RelatedAutoCAD Inventor :: Fillet Line Highlight In Drawings
May 6, 2013I have a little issue with drawings where I cannot find out how to highlight fillet edges on the models. I dare say I am missing some simple setup option.
The picture attached shows what I mean. The left is how the model looks in drawing mode and on the right is how I would like it to look (taken from the modelling environment).
AutoCAD Inventor :: Can Delete Part Of A Fillet Feature
Dec 7, 2011Can you delete part of a fillet feature? While still keeping part of it & adding to it.
I have a fillet feature with 2 fillets to a part. One is in the wrong place.The Feature Fillett1 if you edit it, you will see what I mean.
Keep the middle one. Both fillets are 0.25" / Replace the bottom fillet to the top corner.
I would like to keep the Feature in the order it is in, if possible.
I am using Inventor 2012.
AutoCAD Inventor :: Joining Two Lines (Straight And Fillet)
Apr 16, 2013I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
AutoCAD Inventor :: Fillet A Stitched Solid To A Cylinder
Oct 30, 2011I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
AutoCAD Inventor :: Fillet And Groove Weld Settings?
Sep 14, 2012I have been asked to change some of the default weld settings within the weldment template, i.e. set groove weld to full face full face, set the fillet weld to 6x6. so that when we do a new weldment these things are already set, have hunted high and low on here, through google, autodesk knowledge base for inventor but havent found anything, not sure if havent put the right keywords in or that it just isnt possible to do.
View 2 Replies View RelatedAutoCAD Inventor :: Bend (fillet) Between Two Lines In 3DSketch
Sep 15, 2013I generate 3 points, two lines between point 1,2 and 2,3 and make a bend between the two lines. Cannot do it correctly.
On one side the fillet is not trimmed correctly. I think it is a bug in Inventor. Also when I have the sketch I manually cannot make a decent bend/fillet in the 3D sketch I created.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click 'add 3d sketchpoints in open partdoc Dim oPartDoc As PartDocument Dim oPartDef As PartComponentDefinition Dim oTG As TransientGeometry oTG = _invApp.TransientGeometry oPartDoc = _invApp.ActiveDocument oPartDef = oPartDoc.ComponentDefinition Dim oSketch As Sketch3D oSketch = oPartDef.Sketches3D.Add() Dim sp1(2) As SketchPoint3D Dim rod(1) As SketchLine3D sp1(0) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 10)) sp1(1) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 0)) sp1(2) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(10, 0, 0)) rod(0) = oSketch.SketchLines3D().AddByTwoPoints(sp1(0).Geometry, sp1(1).Geometry) rod(1) = oSketch.SketchLines3D().AddByTwoPoints(sp1(1).Geometry, sp1(2).Geometry) 'bending it oSketch.SketchArcs3D.AddAsBend(rod(0), rod(1), 2.5) End Sub
The resulting part-file is added, for who wants to try to get a bend with both sides trimmed correctly.
AutoCAD Inventor :: How To Change Fillet Sizes With Family Table
Feb 16, 2012i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
AutoCAD Inventor :: Show Fillet Welds Between Bar And Curved Surface?
Mar 23, 2012 I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.
AutoCAD Inventor :: Edit Fillet Weld / Way To Add Welding Symbol
Jan 8, 2013I am looking for a way to add a welding symbol to an existing fillet weld. When I am creating a fillet weld, I get a chance to create a welding symbol based on the fillet weld size.
If this is not done when the weld is created, there is no way to add this notation. I don't have the "Create Welding Symbol" checkbox when editing an existing weld. The only solution is to delete the weld and recreate it.
I am trying to link the welds in the iam with the weld notes in the idw.
AutoCAD Inventor :: Removing / Rebuilding Revolved Fillet From Model
Aug 10, 2012I have a model that has been made up from a revolved sketch and then had loads of bits done to it etc.. Basically it is a tapered ring with a fillet on the top edge, I need a top face dxf export for profiling and to do this I need to remove the radius on the edge, but because it is a revolved sketch and it is not filleted it is not so easy to do with other references involved.
Is there a way I can temporally rebuild the edge to remove the fillet, I tried in fusion but it won't allow a Zero fillet edge?
I can't upload the sketch to show you unfortunately.
AutoCAD Inventor :: Full Round Fillet / Bullnose On Cylinder
Aug 30, 2013Is there any way to place a full round or bullnose feature on the end of a cylinder without having to use any formulas or pay attention to dimensions similar to the three face selection of the full round fillet option?
Obviously you can take the diameter/2, but the three face selection of the full round fillet is quite simple, and if you didn't originally plan on having the full round it takes extra digging to come up with the right parameter to use.
AutoCAD Inventor :: Fillet Edges Of The Designs - Try Again With Small Radius
Sep 7, 2011I am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies View RelatedAutoCAD Inventor :: Delete Fillet Without Deleting Half Of The Part At Same Time?
Oct 10, 2011I made a fillet earlier and then continued to work on the part. Now when I try to delete the fillet (to replace it with chamfer) Inventor gives me a box: "delete features" and the middle box can be selected which says "dependent sketches and features". If I check the box and hit ok, some of the unreleated holes and chamfers gets deleted and the fillet I wanted to delete doesn't get deleted. If I uncheck the box, different chamfers and threads dissappear, fillet I wanted to delete stays in place again and yellow box appears on the corner of the part. So what should I do to just delete the fillet and keep everything else?
View 4 Replies View RelatedAutoCAD Inventor :: Fillet Weld Not Showing Typical Bitmap Texture In 2013?
May 31, 2012Usually when creating a fillet weld it displays a texture of a wavy surface. I can only get a smooth surface. Is there a way to modify weld appearance to what I'm used to?
View 2 Replies View RelatedAutoCAD Inventor :: Filling Irregular Corners With Weld - Overlap Groove Welds With Fillet Welds
Jan 14, 2013Using Inventor Professional 2013
In the attached assembly, I would like to fill the four corners (see Figure 1) with weld to make one smooth bead around the perimeter of the end cap rather than using fillet weld to lay down four linear beads along the edges. I accomplished this with a groove weld (see Figure 2). However, problems occurred (pasted below) when I attempt to weld this piece to a surface.
Error message:
" Create Weld Feature: problems encountered while executing this command.
example.iam: Errors occurred during update
Fillet Weld 3: Could not build this Fillet Weld feature
The attempted operation had problems trimming and discarding faces. Try with different inputs."
When I had the four original fillet weld beads, I could fillet weld this part to a surface no problem (see Figure 3). When I switched it to a groove weld to get the desired corner appearance, I get errors. I tried to mess around with the tick boxes in the groove weld dialog box to try to fix the problem but nothing worked.
Ultimately, my problem can be solved if I could simply fill the corner gaps without using the groove weld command. This would eliminate the errors associated with fillet welding over groove welds.
Let me know if the attached files do not work. This is my first time uploading an assembly and its associated part files.
Figure 1: Corner with fillet welds (need to fill that gap)
Figure 2: Corner with groove weld (gap filled)
Figure 3: Fillet welded (concave) to plate. Still need those corners filled.
AutoCad :: Using A Fillet On Two Curves?
Feb 3, 2013Fillet works fine on a single curve and straight lines, but I'm having trouble using the fillet command on two curves (arcs). I have two circles which I have trimmed into arcs roughly to the correct length, when I try to fillet them (with various radii) the filleted curve either connects to the wrong end of one of the existing curves, or the filleted curve curves in the wrong direction. I've used this tool a lot before and have never had problems - until now. Is there a way to decide which way the fillet curves?
View 8 Replies View RelatedAutoCad 3D :: How To Fillet 3D Polyline
Sep 18, 2011How to fillet a 3D polyline with AC2012?
OR
How to automatically set the corner bend radius of a sweep along a 3D polyline?
The attached image shows what I did in a different program, but need to repeat with AC. The swept 3D object is moved off its path in the attached image.
AutoCad :: Fillet With A Radius
Nov 12, 2012I'm having a problem with the fillet command using a radius, I can't seem to get a rounded corner. I have the radius set at 1.00. I should see a rounded corner. If I set it at 0.00 or 1.00. I get the same result. Something doesn't seem right! Could it be a setting.
I viewed a few videos on Youtube and I can't replicate the same filet with radius results. I watched one that you can select radius by right clicking mouse. A text box appears to the right of the cross hair cursor where you can input the radius. On my screen that does not come up.
AutoCad :: How To Set Chamfer And Fillet
Mar 6, 2012How to set chamfer and Fillet. I have tried but just can not get it to do anything.
I may have maladjusted some other setting. Operator error for sure. I do not need to use these functions for anything else but the 3 shown in the attachment.
AutoCad :: Fillet Between Arc And The Line
Mar 26, 2012I have a line and an arc which are offset to each other. How do I fillet between the arc and the line. Every time I try to do it, it doesn't give the solution I want. I have attached a file which will show you what I mean. I want to fillet between the horizontal white line and white arc with a unit size of 6 so that the result is as shown by the red arc.
View 9 Replies View Related
