I don't understand why this Fillet would fail when it was fine before I changed the length of the edge. See before and after shots attached..
The geometry/features that are used to create the fillet are exactly the same.
I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedI need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
I am building a Crankshaft. How to build the connecting weights that attach the main journals to the connecting rod journals. I can post a screenshot of the design. I have a extruded face that is a half circle on the top.so I am trying to fillet or cut a section off of the rounded edge. I have tried to build tangent workplanes and projecting geomety, but to no avail.
View 9 Replies View RelatedI'm wondering if there is any way to chamfer a set length along an edge (similar to what can be done with flanges in sheet metal mode), as opposed to the entire length of an edge.
View 4 Replies View RelatedI am working on a project for an autocad class and have run into a snag. I have to fillet a box but the rounded edge is on the inside instead of being on the outside. I'm attaching a screen shot of a 2-d version and the 3-d I have so far.
View 3 Replies View RelatedI want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedAutocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
Autodesk Inventor 2013 won't let me create a project. The specified workspace G:Design does not exist.
This can result in unexpected default file locations.
Do you want to create the workspace?
and when i hit OK
Fail to create workspace G:Design.
You may need to change it to other place
In the attached sample file if you edit the sketch in the first surface feature and change the dimension of 600 to 700, both the patch and loft features fail. It seems to be the curved edge that is the problem in both cases.
I cant see anything wrong with either way of modelling this so assume its a bug.This causes other problems in my real model with parts that reference these types of surfaces falling apart further down stream and is wasting heaps of $$$.
insert dwg view in model space with Inv 2014.
I try here and i receive this error " invalid input for request" If i try with 2013 it's work well.
INV PRO 2014
MS Office 2007
Win 7 pro, core i7 950, asus P6T WS
nvidia Gforce GTX 295
WD caviar black 500Go
WD caviar black 1To
I want to create a hole approx 586x586mm. But every time i try inventor respond with "The attempted operation did not produce a meaningful result" If i do a slightly smaller hole it will work, but that is not what i want...
And i run Inventor 2014
Now Inventor allows users to create relationships with Joint or Constrain/Assemble commands. Both of these methods let the creation of Positional Representation, but when animating them in Inventor Studio, only animations created with Pos Reps from constraints work. Animated Pos Reps created with joints don't work at all.
Is this a bug? Will this problem be fixed soon (with SP, Updates or any Hotfix), or would it be fixed in the next release?
SurfaceBody.GetExistingFacets( ToleranceIndex As Double, VertexCount As Long, FacetCount As Long, VertexCoordinates() As Double, NormalVectors() As Double, VertexIndices() As Long )
This works fine in VBA (Inventor 2014). But when I start using the same in VB.NET (VS 2012) all declaration as long shows as integer and fails on compiling. If I change to integer compile passes but fail on executing in Inventor 2014.
I am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies View RelatedIs there a way to create smooth transitions for fillet welds for around corners?I have to create four separate fillet welds on all sides of the mating pieces and it breaks at the corners.
View 2 Replies View RelatedWhat kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies View RelatedI have an animation in Edge, and I'm trying to make a button that can play the timeline for a specified amount of time and then stop, without the aid of labels. So, I figured if i set the button to sym.getSymbol("mysymbol").play(500); it would make the timeline of that symbol play for 500 milliseconds each time the button is clicked, but it is not working, as this makes the whole thing simply start playing at 500ms. So I then tried adding a stop action after this:
sym.getSymbol("mysymbol").play();
sym.getSymbol("mysymbol").stop(500);
But this didn't work, because I guess since these events are one after the other, it doesn't wait 500 seconds to stop, and it reads stop(500) immediately after the play instruction, so that didn't work either. I'm pretty new to javascript, but I've been really trying to learn it along with the Edge API for a couple weeks now and still can't seem to solve this problem.
I have a little issue with drawings where I cannot find out how to highlight fillet edges on the models. I dare say I am missing some simple setup option.
The picture attached shows what I mean. The left is how the model looks in drawing mode and on the right is how I would like it to look (taken from the modelling environment).
Can you delete part of a fillet feature? While still keeping part of it & adding to it.
I have a fillet feature with 2 fillets to a part. One is in the wrong place.The Feature Fillett1 if you edit it, you will see what I mean.
Keep the middle one. Both fillets are 0.25" / Replace the bottom fillet to the top corner.
I would like to keep the Feature in the order it is in, if possible.
I am using Inventor 2012.
I have searched the discussion groep and have not came up with any usefull information.
I have an inside web plate sketch that i want to offset but my offset does only do one line at a time.
So my problem basicly is that I want it to do the whole sketch in one click. Is it possible to join all the lines? or is there another function that I do not know of that will do this for me.
Attached is photos of the problem I have
1 picture - How do I join these lines
2 picture - How the whole sketch looks
3 picture - The offset does only do one line at a time (i want it to do the whole sketch)
I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
I have been asked to change some of the default weld settings within the weldment template, i.e. set groove weld to full face full face, set the fillet weld to 6x6. so that when we do a new weldment these things are already set, have hunted high and low on here, through google, autodesk knowledge base for inventor but havent found anything, not sure if havent put the right keywords in or that it just isnt possible to do.
View 2 Replies View RelatedI generate 3 points, two lines between point 1,2 and 2,3 and make a bend between the two lines. Cannot do it correctly.
On one side the fillet is not trimmed correctly. I think it is a bug in Inventor. Also when I have the sketch I manually cannot make a decent bend/fillet in the 3D sketch I created.
Private Sub Button1_Click(sender As Object, e As EventArgs) Handles Button1.Click 'add 3d sketchpoints in open partdoc Dim oPartDoc As PartDocument Dim oPartDef As PartComponentDefinition Dim oTG As TransientGeometry oTG = _invApp.TransientGeometry oPartDoc = _invApp.ActiveDocument oPartDef = oPartDoc.ComponentDefinition Dim oSketch As Sketch3D oSketch = oPartDef.Sketches3D.Add() Dim sp1(2) As SketchPoint3D Dim rod(1) As SketchLine3D sp1(0) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 10)) sp1(1) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(0, 0, 0)) sp1(2) = oSketch.SketchPoints3D.Add(oTG.CreatePoint(10, 0, 0)) rod(0) = oSketch.SketchLines3D().AddByTwoPoints(sp1(0).Geometry, sp1(1).Geometry) rod(1) = oSketch.SketchLines3D().AddByTwoPoints(sp1(1).Geometry, sp1(2).Geometry) 'bending it oSketch.SketchArcs3D.AddAsBend(rod(0), rod(1), 2.5) End Sub
The resulting part-file is added, for who wants to try to get a bend with both sides trimmed correctly.
i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.
I am looking for a way to add a welding symbol to an existing fillet weld. When I am creating a fillet weld, I get a chance to create a welding symbol based on the fillet weld size.
If this is not done when the weld is created, there is no way to add this notation. I don't have the "Create Welding Symbol" checkbox when editing an existing weld. The only solution is to delete the weld and recreate it.
I am trying to link the welds in the iam with the weld notes in the idw.
I have a model that has been made up from a revolved sketch and then had loads of bits done to it etc.. Basically it is a tapered ring with a fillet on the top edge, I need a top face dxf export for profiling and to do this I need to remove the radius on the edge, but because it is a revolved sketch and it is not filleted it is not so easy to do with other references involved.
Is there a way I can temporally rebuild the edge to remove the fillet, I tried in fusion but it won't allow a Zero fillet edge?
I can't upload the sketch to show you unfortunately.
Is there any way to place a full round or bullnose feature on the end of a cylinder without having to use any formulas or pay attention to dimensions similar to the three face selection of the full round fillet option?
Obviously you can take the diameter/2, but the three face selection of the full round fillet is quite simple, and if you didn't originally plan on having the full round it takes extra digging to come up with the right parameter to use.
I am trying real hard to fillet the edges of these designs but it keeps saying try again with a smaller radius.
View 5 Replies View Related