I am building a Crankshaft. How to build the connecting weights that attach the main journals to the connecting rod journals. I can post a screenshot of the design. I have a extruded face that is a half circle on the top.so I am trying to fillet or cut a section off of the rounded edge. I have tried to build tangent workplanes and projecting geomety, but to no avail.
View 9 RepliesI am working on a project for an autocad class and have run into a snag. I have to fillet a box but the rounded edge is on the inside instead of being on the outside. I'm attaching a screen shot of a 2-d version and the 3-d I have so far.
View 3 Replies View RelatedIt is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedI need to fillet part on an edge on the top face of the enclosed part, is this possible? I have tried a few things but the fillet command always selects all the edges on the face to fillet.
once selected it says in the selection box that 15 edges are selected, and I can't ctrl click to remove any of them singly, basically it will deselect them all? I have made sure I have loop select off.
I need to show fillet welds between the bar and the curved surface. There is a small gap there (3/8" bar against 2 3/4" O.D. tube) and IV and neither groove or fillet weld works. How to show the weld?
I am using IV2009.
I don't understand why this Fillet would fail when it was fine before I changed the length of the edge. See before and after shots attached..
The geometry/features that are used to create the fillet are exactly the same.
I would like to map an image to the face of Inventor part document. Which possibilities Inventor API offers here? I checked out the ColorMapping example but the tessellation of the flat surface is not sufficient to get high resolution image mapped on it. My intention is to attach images to several parts faces within the assembly environment and this as fast as possible since the scene needs to update very quickly.
PS: I use C#.NET.
I want to transfer the rotation motion of part 'C' at a pivot point 'D' , to part 'E' which is pivoted at 'F', while the flat surface of the part 'c' is inserted in to hole 'B' of part E. How to give an assembly constrain to hole 'B' with flat surface 'A'
View 2 Replies View RelatedAny way of drawing an edge bend on a flat bit of copper so I can flat pattern it for the guys on the shop floor to make.
The problem comes with the edge bend, I have provided a picture of a simple bit of copper with various flat bends and a single edge bend. As the flat pattern shows to the right the edge bend is not flattered, This was drawn using a sketch the profile then using "face" . This is why I assume it does not work in flat pattern.
Is it possible to draw an edge bend with a command to allow it to flat pattern? if so which command and how?
autodesk 2012
Windows 7.
Is there any way / trick to wrap a 2D sketch to a non-flat/cylindrical/conical face? See attached part. I'd like wrap the lines in Sketch2 to the ring's outer face in order to get a proper path for "engraving". I see no other way to get a proper path for sweep, because project along vector won't work.
View 2 Replies View RelatedI often have to do storm pond surfaces that (for the purposes of planning) are flat on the bottom. These surfaces are created from a combination of survey data and grading groups and the tin of these surfaces is perfectably acceptable. However, when contours are shown, the flat bottom is shown with contours jig-jagging all over the place.
The attached image shows a comparison of the same pond. The top was created with survey data and grading groups; the bottom was created using contour data only. The generated surface on the top shows the bottom contour going in different directions and has parts where the an expected contour is missing.
How to correct/manipulate the surface to show a proper flat surface?
I created an iLogic rule that allows in a sheet metal part to the informations Length, widht and area of a flat pattern. This rule run and the iproerties are created (see attachment file).
Now, I will run this rule from an assembly file to create automatically, in all sheet metal components, theses iproperties.
Is it possible ? what must I change in this rule ?
If you look in the attached PDF, I have an elliptical wall that also has changes in elevation. call it a compound radius if you will. What I have to do is to make a wall cap to go on top of the wall. I know, sounds fun.....I have the surface on the right of the PDF and i need to figure out how i can take that shape and have it lay flat so that i can cut this shape out on my CNC. i know I can use the FLATSHOT command, but this will not give me the true shape of the board.
View 4 Replies View RelatedI want to put a 5 mm radius fillet on the upper edge. After 1.5 mm it will not...Why? What can I do? Convert it to a mesh object? Or?
View 9 Replies View RelatedI am trying to make a 3d model in autocad. But I have stuck in a problem. When I fillet the surface then I can not trim the extra portion. I am attaching the dwg file. I use autocad 2012.
Trim problem.dwg
I made this surface joining different other surfaces. I would like to fillet this surface edge with edge, not face with face.Is it possible?
View 2 Replies View RelatedI am making a pictured based off of one of my drawings, and it requires that it can transform a flat, perspective image to make it look rounded. How would I accomplish this?
View 2 Replies View RelatedAutocad 2014.
I have the outline of a solid body guitar that I drew with spline, extruded and now trying put a 1/2" fillet radius along the edges, top and bottom.
Using the 3d fillet command produces an error, and extruding a profile along the edge path doesn't work either.
Attached is the spline outline, the red part is what needs the fillet, but the white part does not. However, they can't be extruded into a 3d solid unless their joined!
I have a flat drawing of the earth on its own layer and, through shading, would like to make it look rounded. Painting over it with the brush tool at a low opacity might be one way to do it, but is there an easier way?
Filter > Distort > Diffuse Glow came close to the effect I want, but Spherize was off the mark. Anything else I can try?
I want to shorten this penetration at the backside with 100mm. How can I do this? The rounded edge at the end has to be kept.I am working with Autocad 2010
View 2 Replies View Relatedrunning an assembly in to the road corridor and creating a surface. i have designed a network of Roads in CIVIL 3d in which whole network is surrounded by a Loop road. The loop road cross fall is unidirectional (2%) and 4.5 wide. I have used LaneOutsideSuperWithWidening subassembly to create the assembly of the road. This doesnt contain any kerb or footpath but only road channel lines, The corridor run soomthly but after creating the of the loop road corridor the surface is becoming flat meaning there isn't any cross fall acoss the road but in the assembly crossfall is there. If i run the same assembly in another road alignment the suface is coming absolutely correct.
I also tried different road assemblies to run along the loop road but the result is same no cross fall across the road.
How would you cut into a flat surface such as a rectangle, to create an opening that is visible in 3D?
View 9 Replies View RelatedI am using Civil 3d 2012 and an trying to apply elevation banding (one color) to a surface that is completely flat. Everything seems to be in order but nothing shows up. If I add another point file to it that has a variety of elevations then the elevation bands show up, if i remove it it disappears again. I can view the boundary and get elevation readings when I mouse over the surface.
View 6 Replies View RelatedI have a drawing like as attached drawing. I must to model 2 flat surface with different elevation and a slope between them.
View 5 Replies View RelatedI am using Autocad 2013. I need to fuse a square building which is placed on a sloping terrain. If the terrain was flat, i would have no problems. But how i can put a perfectly square building on a sloping terrain without having any gaps in between?
View 1 Replies View RelatedHow can I make a rounded edge like this?
View 1 Replies View RelatedI can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I want to cut and paste an image with rounded edges.If i cut an image using rounded rectangle or rectangle marquee tool(with feathers 5px),the image blurs in the edges.How can i have a clear rounded edge image?
View 2 Replies View RelatedYesterday one of my friend asked me how to create star with round edge as opposed to pointed edge. Quite fascinated by his challenge I started my beloved CorelDraw and drew a star with 40 spikes at a depth of 10. Since the stars have pointed edge, I used the Filler tool to round-off the sharp edges, I was successful, but the fillet tool also rounded off the lower (inside) node. hence I failed, to create what my friend had challenged.
One option is to create a star, then painfully select only the outer nodes and use the fillet tool to round off the edges. Is there any other easy method of doing the same in CorelDraw.
( My friend apparently uses the rival program Adobe Illustrator and mocks me using CDR )