AutoCAD Inventor :: Surface Filleting With Edge
Jun 6, 2012I made this surface joining different other surfaces. I would like to fillet this surface edge with edge, not face with face.Is it possible?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Fillet Flat Surface To Rounded Edge?
Nov 14, 2013I am building a Crankshaft. How to build the connecting weights that attach the main journals to the connecting rod journals. I can post a screenshot of the design. I have a extruded face that is a half circle on the top.so I am trying to fillet or cut a section off of the rounded edge. I have tried to build tangent workplanes and projecting geomety, but to no avail.
View 9 Replies View RelatedAutoCAD Civil 3D :: Filleting A Solid
Aug 24, 2012If it would be possible to round the edges of the solid i attached as a .dwg file. I thought it would make sense to use the FILLET command but it didn't seem to work.
View 2 Replies View RelatedAutoCad 2D :: Lines Joining When Filleting
Oct 6, 2013Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies View RelatedAutoCad :: How To Use Radius Option When Filleting Arc And Polyline
Jul 2, 2007I keep getting an error that reads: "Cannot fillet between these two entities."
This occurs when I try to use the radius option when filleting an arc and a polyline. I am unsure as to why this occurs on and off on my drawing, as it has previously worked on other sections. I have attatched a copy to make things easier and highlighted three areas where I am experiencing this problem. I am using AutoCAD LT 2006.
AutoCAD 2010 :: Complex Filleting On 3D Model
Mar 24, 2012I have a model that represents a casting with some finished surfaces that I'm trying to throw some fillets and rounds on but the software keeps balking at finishing the process. I've started at various points around the object only to be frustrated when I try to get the final edges to mesh with all the rest.
View 6 Replies View RelatedAutoCad 3D :: Generate 3D Polyline From Sliced Edge Of Surface
Jul 29, 2011I was wondering if you could generate a 3D poly line from a surface which I have sliced. I am trying to establish retaining wall heights in a cutting on an embankment. I have generated the slope using 2 3D polylines offset and edgesurfed between them. I then put my proposed footpath at the desired location. When I needed to slice the mesh I had to convert it to a surface. It worked but I now do not have any nodes that I can connect vertical lines to in order for me to design wall heights etc.
Is there a way to generate a 3D poly from the sliced edge of a surface.
AutoCAD Inventor :: Curved Surface - How To Increase Volume Of Surface At Certain Points Only
Apr 10, 2013how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
AutoCAD Inventor :: Ribs On Curved Surface / Trimming To Complex Surface
Feb 28, 2013I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
AutoCAD Inventor :: Extend Button Flat Surface Diameter 12.5 Upto Shaped Surface
May 31, 2012It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
AutoCAD Inventor :: Extrude Feature And Select Part Surface For New Sketch - Offset Surface?
Dec 9, 2011I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedAutoCAD Inventor :: Merge Flat Surface To Circular Surface?
Dec 6, 2012I am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
AutoCAD Inventor :: Convert Surface To Solid Model / Turn Off Yellow Edges In Surface Model
Mar 4, 2008We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
AutoCAD Inventor :: Surface Visibility In IDW
Oct 22, 2012Did something change in 2013 as far as the way surfaces are displayed in an idw? the surfaces always always had to be "included" in a idw view. now they come in as regular geometry.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
AutoCAD Inventor :: Surface Into A Solid
Jan 17, 2011Is there a easy way to make this into a solid.
View 5 Replies View RelatedAutoCAD Inventor :: Smooth Cam Surface
Aug 28, 2013Is there a way to remove the 'parting' line to create a smooth surface?
Inventor 2013, SP2
Dell Precision M6600
Windows 7 Professional - 64Bit
32 GB Ram
Nvidia Quadro 3000M
AutoCAD Inventor :: Not Able To Close Surface
Nov 1, 2011I am trying to build a robotic head using the surface modeling and thereafter thicken the surface to form solid. I was not able to load the original model as the file size is exceeded. I use a derive model and the problem is similar.
View 9 Replies View RelatedAutoCAD Inventor :: Trying To Extrude To A Surface
Aug 13, 2013I was watching on of the "Sales" videos on Autodesk.com. I saw them extruding a part surface to another surface of an imported part. I have a need to do this. When I try to extrude my part, I cant pick the surface that I need it to go to.
The video I am watching is here. Its titled "Native Translators". They show the surface being extruded at about the 0:53 mark.
The problem that I have is while working in the assembly, I double click on my part to edit it in the assembly. Next I chose Extrude and "To Next", but I am unable to pick the surface I need it to go to. The surface is in another part that is in the assembly. The part I am trying to extrude is adaptive, like in the video.
I did notice that in the video, when they pick the "to Next", the add/cut/intersect is greyed out.
AutoCAD Inventor :: How To Split A Surface
Jun 26, 2012I want to apply a pressure load on portion of a surface in my INVENTOR solid model. My problem is that i cannot split the surface in inventor easily. I did it my creating a separate surface with an offset that i reduced to almost zero.
View 4 Replies View RelatedAutoCAD Inventor :: Edge Won't Fillet
Feb 19, 2012I have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedAutoCAD Inventor :: How To Create A Custom Surface
Mar 24, 2013I have been trying to research how to create a custom surface. I found this article [URL]...... about how to to create a surface from a jpeg. The article says to "expand color on the top left." of the style editor. However, when I open the dialogue there is no "color" that can be expanded. The only thing in the top left of dialogue box is "lighting." Is there another step that the article misses, or is there another way for me to create a surface from a jpeg?
View 2 Replies View RelatedAutoCAD Inventor :: Set All Surface Bodies To Invisible
Jul 16, 2013I found a VBA-code on internet which turn off all work features (plane, axis, points) in all documents in an assembly.
I want to modify it so it turns of all surface bodies instead. I use skeleton modelling where i only want to keep the solids visible and not the surfaces. When I run this iLogic rule all solids get turned off instead of surface bodies.
This code works (when edited) for axis, points, planes, allworkfeatures etc.
'catch and skip errorsOn Error Resume Next'define the active assemblyDim oAssyDoc As AssemblyDocumentoAssyDoc = ThisApplication.ActiveDocument 'get user input as True or FalsewfBoolean = InputRadioBox("Turn all Work Features On/Off", "On", "Off", False, "iLogic")'Check all referenced docs Dim oDoc As Inventor.DocumentFor Each oDoc In oAssyDoc.AllReferencedDocuments 'set surface bodies visibility For Each oSurfaceBodies In oDoc.ComponentDefinition.SurfaceBodies oSurfaceBodies.Visible = wfBoolean Next Next'update the filesInventorVb.DocumentUpdate()
AutoCAD Inventor :: Transitional Constraint Between Pin And Surface
Apr 16, 2013I have a question regarding a transitional constraint between a pin and a surface within an adaptive assembly.
I would like the pin and the surface to be transitional only when the two parts "interfere" with each other.
At the moment with the example attached part A is remaining tangent to part B, restricting the necessary movement of part B to function properly in the mechanism.
In simplified terms I need part B to be able to break free of the "transitional constraint" of part A under certain movement conditions within the mechanism.
AutoCAD Inventor :: Wrapping Text To Surface
Feb 27, 2013I'm attempting to use the "emboss" feature and wrapping the text to the surface of the part.
Attached is the example of the part I am working with. Also attached is the error message I receive after attempting the process. Is there another way to wrap the text about the surface of a "coiled" face?
AutoCAD Inventor :: Loft To Curved Surface
Nov 7, 2009I'm loft retarded. What I did here was loft to a tangent work plane, then did a sketch on the top surface and extruded the shape that I want. There has to be a better & easier way.
View 9 Replies View RelatedAutoCAD Inventor :: Converting Surface Into Solids?
Apr 2, 2012I have several IGES files that I need to make into solid models. I have been searching for days on how to do it in Inventor 2012 and everyone says how easy it is, but yet I have no luck. This file was created from a scanned mold and then made using a point cloud.
View 1 Replies View RelatedAutoCAD Inventor :: How To Make Surface From Equation
Nov 26, 2013I need to make a model of saddle surface. The surface is given by equation z = y^2 - x^2, and I must have some thickness - It will be printed on 3D printer.
I have Inventor 2014 and I dont see possibility of making the surface directly in Inventor. Is there any trick for that?
I'm afraid I cannot use solution as stated here Equation-driven surface , because saddle surface looks like this hyperbolic paraboloid .
I tried this solution: I made 3D surface in Matlab, exported it in .stl and opened in Inventor - but this only makes the surface with no thickness. Functions extrude, loft require 2D sketch.
AutoCAD Inventor :: Holes In Curved Surface
Sep 30, 2013Basically I’m trying to create a circular cut in a flat pattern for a hole made in a rolled piece of sheet metal.
I have created a "case" (this is what we call it) to mount an axial fan, it will require holes for mounting the motor plate. When I create these holes in the rolled case assembly they appear to be fine, but when I flatten it they are turned into two sets of semi-circles or ellipses.
This is only a problem when we run the parts on our Laser; the laser will attempt to start the cutting at the end of each of these "semi-circles" causing a hotspot where the two semi circles meet. This causes the hole to be slightly smaller than intended in this area causing great difficulty inserting bolts, they normally require drilling.
Our material thicknesses vary from about 3mm to 8mm.
I’ve included a crude example of what I’m trying to achieve. To really see what I mean, place the file into a Drawing file and zoom into the hole. I couldn't add the file, with only 3 features the file was 5mb in size.
By the way, I have a temporary solution, it's just a little complicated. (My solution: use square holes first in the un-flat, use the diagonal lines from each corner of the square in a sketch on the flat pattern to place a circular cut on its mid points.)
Intel Xeon 3.0GHz (4 Cores)
nVidia Quadro 2000 (1GB) - Dual Screen
8GB RAM
AutoCAD Inventor :: Run Off Surface When Automatic Selected
Oct 19, 2011I have included some surfaces as run off's but when automatic is select - my chosen surfaces are ignored & a mishmash of surfaces result - can the auto run off feature be edited?
View 2 Replies View RelatedAutoCAD Inventor :: Yellow Surface Edges
May 17, 2013We just upgraded Inventor from 2013 to 2014.
I opened a model generated in previous releases and noticed that there were parts with a strange yellow highlight.
Turns out the parts aren't explicitly highlighted, it's just that their edges are yellow. See the screenshot below.
I usually work in the 'Shaded with Edges' view style. I found that if the view style is changed to 'Shaded' or 'Realistic', the yellow disappears with the edges.
The only parts the yellow edges seem to affect are ones generated as surfaces. I would like to know how to turn the yellow off is possible. So far I've tried changing the part appearance in the toolbar and changing the surface body properties in the model tree; neither method worked.
Now I don't model in surfaces, but there have been purchased parts imported into Inventor that have in the past ended up as surfaces, and it's these parts that have the highlight. I haven't noticed anything like this in previous releases.
AutoCAD Inventor :: How To Delete A Work Surface
Aug 1, 2013How to delete a work surface. These work surfaces were imported from an iges file which contains thousands of work surfaces. They are not associated with a part feature which can be deleted. I've developed a routine to sort through these and identify unwanted work surfaces based on their positions. The best I've been able to come up with is to make them invisible, but I'd really like to delete them completely to clean up the file. I did try to loop through and delete any surface body objects associated with the work surface but that failed.
View 8 Replies View Related