AutoCAD Civil 3D :: Filleting A Solid
Aug 24, 2012If it would be possible to round the edges of the solid i attached as a .dwg file. I thought it would make sense to use the FILLET command but it didn't seem to work.
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Import 3D As Solid Objects Or Convert Polymesh To Solid
Jun 18, 2013I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
AutoCad 2D :: Lines Joining When Filleting
Oct 6, 2013Sometimes when I am filleting lines they end up joining together like a Polyline. Is there a setting I can turn off that will not allow lines to join when filleting?
View 3 Replies View RelatedAutoCAD Inventor :: Surface Filleting With Edge
Jun 6, 2012I made this surface joining different other surfaces. I would like to fillet this surface edge with edge, not face with face.Is it possible?
View 2 Replies View RelatedAutoCad :: How To Use Radius Option When Filleting Arc And Polyline
Jul 2, 2007I keep getting an error that reads: "Cannot fillet between these two entities."
This occurs when I try to use the radius option when filleting an arc and a polyline. I am unsure as to why this occurs on and off on my drawing, as it has previously worked on other sections. I have attatched a copy to make things easier and highlighted three areas where I am experiencing this problem. I am using AutoCAD LT 2006.
AutoCAD 2010 :: Complex Filleting On 3D Model
Mar 24, 2012I have a model that represents a casting with some finished surfaces that I'm trying to throw some fillets and rounds on but the software keeps balking at finishing the process. I've started at various points around the object only to be frustrated when I try to get the final edges to mesh with all the rest.
View 6 Replies View RelatedAutoCAD Civil 3D :: DWG Topography To 3D Solid
Nov 13, 2012I need to create a 3d terrain solid from dwg nivel curves (contours). I tried with loft command but the lines are too detailed and my pc takes a eternity to loft just 2 lines and i have a lot of it.don't create a extensive 3d file?
View 3 Replies View RelatedAutoCAD Civil 3D :: Converting A Dxf File Into A Solid?
Aug 4, 2012I have imported a wire frame as a dxf file from another 3d modeling program and want to know how to convert it to a civil 3d solid.
View 6 Replies View RelatedAutoCAD Civil 3D :: How To Trim Solid From A Sphere
Oct 5, 2012i'm a Autocad 3D newbie! Have some problems to figure out how to trim a solid from a sphere. well here's an image that will explain better!( it's the pink part from the green)
View 2 Replies View RelatedAutoCAD Civil 3D :: Solid State Drive
Jul 25, 2012I recently obtained a new laptop with a Solid State Drive and, holy smokes, it's seems at least twice as fast as another laptop with comparable specs like RAM and processor. I used a stopwatch. It was incredible.
Things like opening the program, opening drawings and re-loading Xref's are all way way way faster than without the SSD.
To those of you who have added SSD, are you seeing the same boost? This appears to be an easy way for Civil 3D users to increase speed tremendously, without purchasing a whole new system.
AutoCAD Civil 3D :: Surface To 3D Solid And SAT / STL Files
Apr 23, 2009I have created a surface in Civil 3D by adding contours....... Now that I have created the surface I need to Exoprt it to .sat / .stl files. But in order to do this I need a 3D Solid.
How do I convert this service to a 3D solid in order to the the export?
I have tried the thickening option in the 3D Modeling workspace but it doesn't want to accept my surface.
AutoCAD Civil 3D :: How To Edit The Solid Arrow
Jan 9, 2013i am trying to edit the arrow? When i click on it, it shows as a solid under properties. I need to resize that arrow, Just dunno how to do it?
View 9 Replies View RelatedAutoCAD Civil 3D :: Can't Get Perpendicular 3D OSnap To Grab The Solid
Mar 18, 2013I have a drawing (c3d 2013) provided by a subcontractor that contains high density laser scan data in the form of Acad solids. I have a bunch of conventional QC shots on the same objects, that I would like to compare to the scan data.
I can bring the QC shots into the scan drawing as cogo points, but when I try to measure the distance to the face of the solid, I can't get the perpendicular 3d osnap to grab the solid.
AutoCAD Civil 3D :: Corridors - Non-Solid Hatch Not Lining Up Between Regions
May 17, 2012I am working on some car parks and am using corridors. There are some area's that consist of seperate regions to tie up corner areas and junctions etc.
I am using link codes to create hatch and would like to use non-solid hatch. But the hatch does not appear to line up properly between regions, as shown on the attached image.
Intel Xeon E31230 - 3.20 GHz
4.00 GB RAM
Windows 7 Professional - 64-bit
Nvidia Quadro 600 - 1GB DDR3
AutoCAD Civil 3D :: Project Solid Objects Into Section Views?
Oct 25, 2012I am using C3D 2012. I my drawing I have 3D solid objects that I want projected into my roadway x-sections. When I use the menu command to "project objects to section views" and select "solids" I get the message "no objects to project". Are their different types of solid objects in autocad?
View 9 Replies View RelatedAutoCAD Civil 3D :: Solid Grey Hatch In Profile View
Mar 12, 2012I am working on setting up a Template to suit my company. For some reason, whenever I make a profile view (see attached), the data bands are filled with a solid grey. This disappears when I am zooming in or out but will return once I stop.
View 2 Replies View RelatedAutoCAD Civil 3D :: Bridge Modeler And Corridor Solid For 2013
May 24, 2013download link for Bridge Modeler & Corridor Solid for Civil-3D 2013.
View 5 Replies View RelatedAutoCAD Civil 3D :: Material Section Style - Hatch Solid Not Changing
Apr 17, 2013I have section views created from corridor model that also have had materials computed. The cut and fill areas are hatched solid and I want them set as another hatch style but after attempting to adjust the pattern it does not change. How does one change this and have it show? Civil 3d 2013 is currently being used but may have to back track to 2009.
Dell Precision T3500
Windows 7 x 64
Intel Xeon @ 3.07 GHz
12 GB RAM
NVIDIA Quadro 4000
Civil 3D 2013
AutoCAD Visual LISP / AutoLISP :: Select Non-solid Entities On Solid Layer
Mar 19, 2012We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
AutoCAD Civil 3D :: Extract Boundaries From 2D Solid Level Band Surface Style
Jun 20, 2012I'm using 2D solid level band surface styles when generating simple flood maps - In order to manipulate I generally have to extract the surface objects (faces or hatches) which gives me a single face or object per triangle within the surface.
I then try and get round this by using a combination of various Lisps and Union to wind up with a single boundary that I can then use in ordinary AutoCAD and 3rd party software. However on big surfaces this is killing me as I have 50k+ triangles, so 50k+ faces or individual hatches, so its causing 15min long unresponsive stalls on my PC.
What I'd like to do is simply export the boundary of each level band to a polyline, or even better to extract the whole solid band as a single hatch object. Is this possible within C3D as it stands, or is there a lsp out there
AutoCAD Civil 3D :: Create Hatching For Slopes Surface Style Instead Of Using Solid Colors?
Dec 15, 2012Is there a way to create hatching for the slopes surface style instead of using solid colors?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Show Arrows (solid Or Stick) Between Vertices In Profile Views
Aug 30, 2012how to show arrows (solid or stick) between vertices in Profile views. It seems other design packages can do it so I hope C3D can as well, however I can not find anything detailing if it can be done or how. I attach and example so you can see what I mean. Arrows show sections of differing flow/pipe size & grage for each pipe.
View 1 Replies View RelatedAutoCAD Inventor :: Split A Single Solid Body Into 2 Solid Bodies?
Sep 19, 2012I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2010 :: Remove Line Inside Solid Object / Transparent Solid Objects?
Sep 16, 2013How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
AutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCad 3D :: Trim Diagonal 3D Solid To Top Of Horizontal 3D Solid In Picture?
Jul 10, 2013Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies View RelatedAutoCAD Inventor :: Make Solid / Change Parameter Of Solid
Nov 18, 2012I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
AutoCAD Civil 3D :: Change Grid Lines From Solid To Dotted Line In Section View?
Sep 5, 2013How do I change the grid lines from solid to a dotted line in the Section View?
View 3 Replies View RelatedAutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedAutoCad 3D :: Subtract Smaller Solid From Bigger Solid
Nov 7, 2012I want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies View Related