I have included some surfaces as run off's but when automatic is select - my chosen surfaces are ignored & a mishmash of surfaces result - can the auto run off feature be edited?
View 2 RepliesI attached 3 pictures describing my problem.
On the first one you can see the feature lines i'm about to grade. The closed line is a pond and the two lines on the right is a riverbed. The area between them is just land.
On the second picture you can see a part of the surface i need to get by grading. I need the pond, riverbed and land to be one surface.
On the third picture you can see what happens, when i try to grade the riverbed under the same grading group. The pond surface disappears while the grading stays.
I am trying to figure out where to set the Automatic Surface adjustment for a structure in a pipe network. Right now I have it set to true but I would like to change that to false.
View 5 Replies View RelatedI am trying to use a selected surface in a LISP program. I want to be able to save the currently selected surface into a varialble that I can use to control the style of the surface. I would be either selecting the surface by picking the surface from the drawing, or selecting the surface from the list/dialog box of available surfaces. I can't seem to locate a system varialble that holds that info.
C3D 2012.
When using the design pallette tool bar, my objects will not insert into the selected surface? Reasons Why?
View 2 Replies View Relatedi.e. it would be usefull for separating the top and bottom of a sheet metall or plastic part.
Other cad systems I have seen have a function to do this automatically....
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
We are looking for a way to export BOM's without having to open individual IDW's.
We were unable to find such a function in either Inventor or Vault Workgroup. We have found customized function for export but each file has to be opened. Is there such a function available that we might have missed or third party?
We are currently working with 2011 versions of Inventor and Vault Workgroup, soon to be migrated to 2013.
I've recently changed idw template and since then when I put part view into new draft the file name don't change into source file name.
In standard template, when I save the .idw file it automatically propose name that is equal to source .ipt and .iam. Why when I'm saving files it won't propose file name the same as the source ipt file name?
I am trying to have Inventor to automatically export a SAT file when I close the program, I have searched the discussion boards and have not been able to find any post about automatic export in Inventor or Revit.
Goal:
My goal is to have Inventor to automatically export a SAT file in order to have those who are using Revit MEP to always have a updated version of the Inventor Model in their model drawing and vise versa.. This I think would take the human factor out of the equation, WHY?.. well we humans tend to forget about those working around us and are not that good in exporting a updated file every day!
i would like to have a page number in idw automatically ad when i added a page it will indicate "page 2", is it possible?
at the moment , i manually type a text annotation for page # for each page.
inventor 2011
vault 2012
When I setup my model for the FEA and hit Automatic Contacts, no contacts are detected .... You can see in the image I posted that Automatic Contacts is greyed out (once applied) and no Contacts are in the the Folder. I have ensured that my assembly contraints are valid and that they are indeed mated (face to face) - see image below. The Manual Contacts will work, but that kind of defeats the purpose of having the Automatic one. I have never altered any options or settings within the Simulation. I am using INV 2013 Pro. Most of the pieces in my assembly are 2x2x0.125 HSS (right out of CC).
View 6 Replies View RelatedI've been making iLogic assemblies with hints of VB for about 6 months now. My Boss has asked me if I can write code that will effectively create drawings automatically.
What we would like to create is a rule, which when run, creates a new drawing file, places the active assembly in a base view, then place a Left, Right and Top view of the assembly and place a parts list in the top corner. Dimensions are not really important at the moment, as the sizes of the parts are in the description field and the drawings are used for assembling the product only.
I want to create some universal bricks creations. These bricks have studs which fit into another brick. To constraint them I need to do following actions:
- click place constraint
- Assembly >> Insert >> opposed
- Offset 0,35mm.
I would like to make above into 1 action, so just click to add this action, then select the 2 faces to constrain.
Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies View RelatedIt is possible to put scale on drawing in inventor 2010? If is how?
View 4 Replies View RelatedI have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
I have my autocad drawings setup that in the corner of all autocad drawings the time and date changes everytime you open drawings in autocad. i want to do the samething for my inventor drawings.
View 3 Replies View RelatedWe received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
When we insert a Revision Table to a drawing we have the option to update Revision Number property in the drawing. This property is updated whenever we add a Revision Row.
I want Inventor to update the Revision Number property in the model the same way.
If this is not possible, is there a way to automatically map the Revision Number property in the drawing to the Revision Number property in the model?
About Substitute Shrink wrap parts, it doesn't automatic update when I use UPDATE or even REBUILD ALL inside the LOD with it, even if I don't break the link with the assembly it doesn't update, so I have to go in each assembly with Substitute parts ( with are many in huge projects) and then verify with "Check for updates" in the correct LOD (which in some cases are more than one per assembly). Is there a way to update them direct from the main assembly with rebuild all or something like that ?
View 1 Replies View RelatedI'm currently working on a model and it annoys me a bit that whenever i create a new Sketch a Center Point is created automatically (okay thats quite useful for the first sketch) and when I create a sketch on a face of an extrusion, the shape of that face is automatically projected as lines in my new sketch.
Usually I don't need that "projection" - is there a way to disable this feature?
I'm using Inventor Professional 2014 Student edition.
PS: I just noticed that I can't snap to center and corner points after deleting the projected shape.
Dont have a before print Event Triggers . I want to make a rule with automatic print with a right sheet size, but in all my try don't work
that is my last one
'Dim oDraw As Document
oDraw = ThisApplication.ActiveDocument
oDrawDoc = ThisApplication.ActiveDocument
oDrgPrintMgr = oDrawDoc.PrintManager
[code]........
what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
How to make Automatic Update propeties for Flat Pattern Extens. I have write code and setting rules trigerred by event (Before save, Any model Parameter Change) but if some parameter change properties isn't automatic update. So could some one tell me how to solve this problem.
Part with iLogic code is attached
I have one problem in ilogic i developed the model using ilogic rules and dimension values updated through the User interface form.
problem is while entering the values in UI, model updates automatically, but I want to stop automatic update and after entering the all the parameters in the UI then click the done button only update the model.
My UI is like this
It's possible.
I am looking for solution for my problem which concerned placing a lot of standard elements in assembly. The assembly is a frame which consists of standard profiles and those elements are standard fasteners. All from item24. I have 3-5 fasteners in library (about 200 of every kind in assembly) which are placed in standard way (three constraints). The frame is a normal assembly, not a frame generator, unfortunately. What I want is a way or functionality for placing those fasteners in fast way with ability to choose proper geometry of profiles and other parts (holes).
The best way would be to use it like bolts and washers from content center with idrop/i-drop functionality. I have never published my own library to Content Center, but yesterday I spent a lot of time reading that its hardly possible to use this i-drop for personal purpose. I found only opinions, but no examples.
Another nice thing would be the ability to have constraints preloaded at the moment of placing element in assembly and select only proper geometry of profiles and parts in proper order. I'm thinking of i-mate with only one half (I haven't use them much). Unfortunately I haven't managed to do that using i-mates - they start working only when there is another part with i-mate in assembly and pair with them. I couldn't find any materials about how to use i-mates in a way I have described. I don't want to use alt+drag.
Is there a way to speed up placing 3000 constraints in several projects?
I am using Inventor 2011.