How to make Automatic Update propeties for Flat Pattern Extens. I have write code and setting rules trigerred by event (Before save, Any model Parameter Change) but if some parameter change properties isn't automatic update. So could some one tell me how to solve this problem.
Part with iLogic code is attached
I want to have a Blank size custom iproperty using flat extents length and width this is what i did but gives error is there a way to get this to work the way I want it to? I dont want a Length and width to be seperated would like it all in one.
iProperties.Value("Custom", "BLANK SIZE")=Round(SheetMetal.FlatExtentsLength, 3)"X"=Round(SheetMetal.FlatExtentsWidth, 3)
I attached the iLogic code which is automatically creating dwg drawing (script borrowed from one of the discussion group users), also it creates 4 views. I`m just wondering how to add flat pattern ?
View 7 Replies View RelatedI have one problem in ilogic i developed the model using ilogic rules and dimension values updated through the User interface form.
problem is while entering the values in UI, model updates automatically, but I want to stop automatic update and after entering the all the parameters in the UI then click the done button only update the model.
My UI is like this
It's possible.
I have read all the topics about rule that save flat pattern (.ipt) as .dxf file. Unfortunately, It doesn't work with Inventor 2012. I found rule by Rob Cohee and it works but it saves all lines. I need dxf file with only outer and inner profile, no bend lines.
View 3 Replies View RelatedI created an iLogic rule that allows in a sheet metal part to the informations Length, widht and area of a flat pattern. This rule run and the iproerties are created (see attachment file).
Now, I will run this rule from an assembly file to create automatically, in all sheet metal components, theses iproperties.
Is it possible ? what must I change in this rule ?
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
If there is a way to remove the bend extents line when you create flat pattern. I don't mean in the drawing, the actual flat itself. My reasoning for this is when i transfer the flat into my nesting program, the bend extents lines transfer too. See attached img.
View 1 Replies View RelatedIs there some method to get the extents (i.e. bounding box) of a sketch? I'd like the vertical and horizontal dimension.
View 1 Replies View RelatedI can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
We use the snippets from iLogic on all of our parts to measure the length, width or height of our parts. However, we have noticed that when a 'Move Face' operation or a 'Replace Face' operation is used, the length measured does not seem to take into account the Move/Replace operations.
Are the Move/Replace operations different than other features like Extrude/Revolve? Is there something "ghost-like" about them??? The edges work fine on the drawing side, so I'm not sure what is different. Maybe it is the iLogic snippet?
In regards to it being the snippet, is there another code I can use that doesn't require specific feature or part information built in?
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View RelatedMy next challenge with my rolled cone bottom is to place an oval in the cone that will give the right edges for the lazer pattern. If I create the cut while in the formed shape the edges are not perpendicular to the face in the flat pattern. If I place the cut in the flat pattern, it is suppressed when the part is returned to the formed state.
In other packages I would unfold the part, place the cut, and then refold it retaining the cut. How do we deal with this situation here?
I want to make dxf files from a flatpattern with ApprenticeServer in a VB6 project. I tried this code but I get a Error 5 on the line :
oDataIO.WriteDataToFile sOut, strFilenaam
What's wrong?
Public Sub Maak_UitslagDXF_Appr(strFilenaam As String)
Dim oApprenticeServerApp As New ApprenticeServerComponent
Dim oPartdoc As ApprenticeServerDocument
Set oPartdoc = oApprenticeServerApp.Open(strFilenaam)
[Code]....
My flat pattern of a sheet metal part fails when I added strenthening Press ribs to the middle of the part using an iFeature.
I know Inventor is not capable of flattening embossed sheetmetal but is there a way to still get the flat pattern & ignore the formed areas?
Seems to me I was able to add some model features in the past like bosses, extruded holes KO's etc & I could still make a flat pattern.
I know I can use derived part to do it but that adds complications.
IV 2012 SP2
Inventor Suite 2013 Ultimate
It's my first time using sheet metal in a drawing and I can't figure out how to show flat pattern in the drawing. When I insert the base view into my drawing, the bottom to "Sheet Metal View" to "Flat Pattern" is shown, but it's ghosted out so I can't select it. Is there something I have to do in the part drawing in order to activate this feature?
View 2 Replies View RelatedSo, I have an assembly with a sheet metal part and a lot of pressed studs, spacers, weld nuts. I'd like to do a flat pattern with these parts in it in order to give their positions to manufacture, because they have to be pressed and weld in flat pattern phase, before bending.
Is there any easy way to do this (instead of saving flat pattern as SAT and insert every components again)?
I have designed a hopper using the lofted flange command. It is a 24" sq going to an 8" diameter. I would like to apply the rip feature to make (4) separate sections for this hopper so that (4) separate pieces can be cut on a waterjet machine. I can make it so that only (2) flat patterns are required, (2) pieces cut for each.
Can this be done in Inventor 2011? Also, can you recommend a good book on Sheetmetal in Inventor?
I am trying to develop a macro that exports all flat patterns for sheet metal components. I haven't been able to get the following code to work. It give the error message "The document you are trying to save is not a drawing document"
Sub PublishDXF() Dim DXFAddIn As TranslatorAddIn Set DXFAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91-0010B541CD80}") Dim oDocument As PartDocument Set oDocument = ThisApplication.ActiveDocument Dim oContext As TranslationContext
[Code] .......
I just got around to installing my subscription upgrade from INV PRO 2012 to 2013. I am having trouble getting sheet metal flats to show up in the idw's. The folded parts are visible, solid parts are visible, etc. The problem seems to be specific to flat patterns. I have attached a screen shot of a sample part.
When I hover the mouse over where the flat pattern should be, the red dashed box which usually encloses the view shows up, however it is tiny. Barely the size of the view label.
I'm having difficulty with a sheet metal part creating a flat pattern for it. The shape is an ellipse with the dimensions shown in the second picture. When I attempt to create a flat pattern it just shows the side of the part. The sheet metal defaults are correct for the part and it was ripped to created a base point for the pattern. I need to create a DXF for manufacture. I would just use the flat pattern it gives me and mirror it twice to create a pattern but it doesn't factor in the radius of the part. How to create a correct flat pattern for this item?
View 5 Replies View Relatedhow can i get a flat pattern for an object with more than one rip? it only gives me half the flat pattern.
example for company privacy
inventor 2014
Windows 7 Pro 64
i7-3820 3.6GHz
32 GB RAM
2 TB HD
NVIDIA GeForce GTX 660 Ti
Liquid Cooled
3D Connexion
CM Storm
twin ASUS LED
I'm unable to create a flat pattern .
View 5 Replies View RelatedI was wondering if there is any possible way to flat pattern a coil. Attached is a picture of what I am trying to flat pattern. Its a quarter turn of a full coil.
View 7 Replies View RelatedWhen we insert a Revision Table to a drawing we have the option to update Revision Number property in the drawing. This property is updated whenever we add a Revision Row.
I want Inventor to update the Revision Number property in the model the same way.
If this is not possible, is there a way to automatically map the Revision Number property in the drawing to the Revision Number property in the model?
About Substitute Shrink wrap parts, it doesn't automatic update when I use UPDATE or even REBUILD ALL inside the LOD with it, even if I don't break the link with the assembly it doesn't update, so I have to go in each assembly with Substitute parts ( with are many in huge projects) and then verify with "Check for updates" in the correct LOD (which in some cases are more than one per assembly). Is there a way to update them direct from the main assembly with rebuild all or something like that ?
View 1 Replies View RelatedA rather simple sheetmetal part won't result in a flat pattern. Pls. see attached screendumps.
The problem starts with the contour roll. Surpressing this contour roll feature (and dependent featured flange) results in a OK flat pattern.
IV Pro 2012, Win 7-64 Ult.
I want to creat a flatpattern of an iregulary cut cylinder that was made in the standard .ipt world and is now converted into a sheetmetal. I want to "Unroll" the piece out so can see the shape of it as a flat piece. Picture of it is attached.
View 6 Replies View RelatedAny way of drawing an edge bend on a flat bit of copper so I can flat pattern it for the guys on the shop floor to make.
The problem comes with the edge bend, I have provided a picture of a simple bit of copper with various flat bends and a single edge bend. As the flat pattern shows to the right the edge bend is not flattered, This was drawn using a sketch the profile then using "face" . This is why I assume it does not work in flat pattern.
Is it possible to draw an edge bend with a command to allow it to flat pattern? if so which command and how?
autodesk 2012
Windows 7.
I am trying to write an external iLogic rule that will export the unfolded model of a sheet metal part in a drawing from a rule triggered in the .idw. These drawings will contain only one model reference. The reason for doing this from the drawing are as follows:
1) The location of the resulting .stp file must be the same directory as the .idw file. our file structure does not co-locate these files so the drawing path is required to locate the .stp file.
2) The current Drawing Rev level is to appended to the .stp file name. We do not populate the Rev iProperty in the part.
I have scabbed together some code from verious deep dark corners on the internet and Have arrived at the code posted below, but It errors during the .stp file creation with the following:
Error Message:
Error in rule: STEP Export With Rev, in document: 4000401-02 Blank Pattern.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
More Info:
System.Runtime.InteropServices.COMException (0x80004005): Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))
at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
at Inventor.FlatPattern.Edit()
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule).
I can't get Inventor to create a flat pattern of the attached sheetmetal part. It's a pretty basic part, just five folds. I'm not getting any error issues - when I go to the flat pattern it just shows the folded part (picture attached).
I assume it has something to do with the way I folded it and the notches, etc. Inv makes to accomplish the fold. I'm using Inventor 2013 on Win 8.
