AutoCAD Inventor :: Pattern Won't Update Unless Edit The Pattern?
Nov 20, 2013
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
How can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
As you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
I am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
How to make Automatic Update propeties for Flat Pattern Extens. I have write code and setting rules trigerred by event (Before save, Any model Parameter Change) but if some parameter change properties isn't automatic update. So could some one tell me how to solve this problem.
The attached part, created in Inventor 2012, has a formula for the number of occurances in a sketch pattern based on its length. When this number changes due to a length change, some parts of the sketch do not reposition and Inventor does not indicate that an update is required. The part can be fixed by dragging the affected geometry or performing a rebuild all. The following image shows the result when the length changes from 300 to 500.
I have an assembly drawing .IDW with more than 50 instances of an O-ring (same ipt.). Is it possible to edit the hatching of the O-ring and all 50 will update without having to edit each individually. ?
I am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
The pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
I have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
I love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
I've been using Define Pattern to create patterns to then use as fills - now I have a number of patterns that I don't need. Is it possible to edit the pattern list, so I can delete old patterns.
Well, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
i'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
is there a simpler way of creating these patterns or a way of doing less work to create these patterns?can this be accomplished with a formula/ function?
My next challenge with my rolled cone bottom is to place an oval in the cone that will give the right edges for the lazer pattern. If I create the cut while in the formed shape the edges are not perpendicular to the face in the flat pattern. If I place the cut in the flat pattern, it is suppressed when the part is returned to the formed state.
In other packages I would unfold the part, place the cut, and then refold it retaining the cut. How do we deal with this situation here?
I want to make dxf files from a flatpattern with ApprenticeServer in a VB6 project. I tried this code but I get a Error 5 on the line :
oDataIO.WriteDataToFile sOut, strFilenaam
What's wrong?
Public Sub Maak_UitslagDXF_Appr(strFilenaam As String) Dim oApprenticeServerApp As New ApprenticeServerComponent Dim oPartdoc As ApprenticeServerDocument Set oPartdoc = oApprenticeServerApp.Open(strFilenaam)
I did a pattern in part file which i want to use to rdive an objert (another part) in assembly but whan i place the part in assembly i CAN'T see the pattern so i can't select it & use it.
Is there any way to make the pattern visible/useable?
I'm trying to pattern a subassembly onto a final assembly in Inventor, and it won't let me select the subassembly as a feature to be patterned. Is there a way to pattern a subassembly?
It's my first time using sheet metal in a drawing and I can't figure out how to show flat pattern in the drawing. When I insert the base view into my drawing, the bottom to "Sheet Metal View" to "Flat Pattern" is shown, but it's ghosted out so I can't select it. Is there something I have to do in the part drawing in order to activate this feature?
I have a simple bolted connection (bolt, nut and washer) and have tried to pattern this to make a toal of 4 bolted connections in a linear pattern. The preview looks fine however when I hit apply the patterned components disappear. I'm not sure why this is, I am using Inventor 2013 64-Bit SP 1.1
Autodesk Inventor Professional 2013 SP2 64-Bit Edition Windows 7 HP Z400, Intel Xeon W3550 3.07GHz 12.0GB RAM, ATI FirePro V4800 (FireGL)
I have a sheetmetal assembly with helical shaped parts. I need to place about 50 little brackets and some corresponding rollers along the length of these helical pieces. The spacing is even so a pattern would be perfect, except I don't know how to get it to follow the shape of the part. The brackets are located to slots in the helical parts which were made with a rectangular pattern in the unfolded state. I tried to do a "feature pattern select" but it only saw the rectangular pattern as it is in the unfolded state (a straight line). I then gave up on patterns and started working on manually mating them into place but realized that the geometry of the slot was distorted (theory) and didn't leave me with any useable surfaces.
In my head assembly I have a subassembly that has derived parts from my skeleton. My skeleton (part ending with skt in the picture) is in the subassembly.
In this subassembly I made a view representation: NoSKT..When this is activated the skeleton is hided (see picture).If I now make a pattern of this subassembly in my head assembly with for example a parameter from my embedded excel or a parameter in inventor "quantity = 2" inventor will add 1 element with the same view representation. Still no problem.
The problem is now when I change the parameter. If I change the quantity to for example 3, the view representation of the third element is gone and the skeleton will become visible.I have many parts like this in my head assembly and quite a lot of patterns. Which means a lot of skeletons become visible. Is there a way to stop this from happening?
I have a component pattern with 3 components in it and I need to remove one of the components from the pattern. How can I modify the pattern through the API? I have tried various things but I do not appear to be able to change the pattern.
