i'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
View 10 RepliesHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedI played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedI love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
Having trouble saving a pattern in 64bit Illustrator? Seems to work fine in 32bit but only saves the original symbol (1 time) in 64. Follow the same procedure in each case, drag symbol (or place own symbol) to library then to document, make pattern (all works fine) but then "save a copy" in 64 only saves the original symbol not the pattern(in my case).... 32bit saves the pattern.
View 5 Replies View RelatedHow can I take these groups of white dots and have them go around the entire object while also taking it's shape?
View 9 Replies View RelatedI'd like to create a pattern so that I can fill a large rectangle with it and have it look like a checkered tablecloth.
I've attached an image of the idea of the pattern, as well the pattern I created and the result, which did not come out the way I wanted. How do I get it to be seamless (repeated with no break)?
I am trying to create an infographic that has a circular pattern. I'm hoping there is a streamlined process that allows me to start with a linear set of bars/pattern (with vertical text) and then automatically transforms the set to an evenly-spaced radiating pattern.
Here are some examples of what I would like to achieve: [URL] ....
I know there has to be an easy way to make an image like this (I'm referring to the lines radiating throughout the image.
View 5 Replies View Relatedwhere could i find a pattern overlay/pattern of holes for a metal floor.
View 9 Replies View RelatedAs you see in the template photo (the photo was scanned by Microsoft Security Essentials, healthy) I wanted to extrude my circle, and I made 28 pieces with circular pattern feature; now, do I have to choose all the pieces by one by to be able to choose all?
The sum of the problem: while using the Circular Pattern feature or rectangular pattern feature in Inventor, sometimes I want to extrude (join) or cut the drawings that I made (augmented) with using circular pattern feature, rectangular pattern feature. in this case do I have to choose all the augmented members one by one (for instance I make 42 augmented members), it can take a lot of time.?
Is it possible to take a feature created by a pattern and reuse it to create another pattern? I have a circular part on which I have created a linear pattern (using the rectangular pattern feature) of holes, 6 in total listed as 3 ccurrences. if we number the holes 1-6, I would like to make a circular pattern based off holes 2 and 5. I have been unable to figure out how to select the individual "occurrence" related to the hole once in the pattern feature. If I create the circular pattern first and then the linear and try to suppress the others it supresses both holes in the occurrence.
View 4 Replies View RelatedThe pattern stamp is not loading the correct pattern in Photoshop CS6. Although it shows the correct image when I go to Edit - Define Pattern, once I start painting I see that is not correct.I tried resetting my preferences.
View 3 Replies View RelatedI have a pretty basic knowledge of Photoshop and I am trying to change fabrics on curtains I have managed to do this but now I am trying to use pattern maker to create a tiled pattern with a fabric so it repeats correctly I have worked out how to start this off but every time I generate a pattern and tile it it becomes distorted I have tried increasing the sample detail but this just seems to distort it more.
View 2 Replies View RelatedI am creating an assembly with my base part being a weldment. I've added other components that mount to my base part. Now I need to add fasteners to the mating components. I have added my first fastener and now want to pattern the said fastener using the "Pattern Component" and by using the "Feature Pattern Select" option and selecting "Associated Feature Pattern". At this point I have already selected the component that I want to pattern and selected the "Associated Feature Pattern" to select my base pattern. The only problem is that I am unable to select the pattern desired.
A note on how my Weldment was constructed -The holes were created in the "machining" step of the weldment, not in the individual part before it was placed in the weldment assembly.
If I move the hole feature and its pattern to the individual part and then place it in the weldment assembly, I can then create an "Associated Feature Pattern" in my assembly file.Why can I NOT create the associated pattern when my hole features are created in the weldment assembly? Or am I missing something?
I have an assembly which I am using as a icopy component. In the assembly I have the adaptive sketch which os used for the icopy function and a part which is adaptive to the sketch. I then have the part pattern itself in the assembly. The problem is the pattern will not update when changes are made unless I edit the pattern. The pattern references parameters from the sketch so that when the sketch changes the pattern should change. It works but the pattern will not update unless i open the pattern to edit it. Is there a vb function which will force the pattern to update when a change is made? I tried the update document vb functions but no change. I will try to get a sample together that is a smaller file size so you can see what I am talking about.
View 2 Replies View Relatedin photoshop 7, how do you make a new pattern.
i want to have a gradient of 12px by 50 px and i want to make that into a pattern so that i can have it for later use.
what do i do to make a new pattern.
I am trying to create a pattern like this [URL]... in CorelDraw x4.
It's not something I have tried to do before and I am a newvie to CorelDraw as my new job requires me to use it. My old job required Illustrator CS4/5.
is there a simpler way of creating these patterns or a way of doing less work to create these patterns?can this be accomplished with a formula/ function?
View 4 Replies View RelatedI'm trying to replicate this backdrop. So far this is the best I can achieve. how to make it look closer to the original.
View 5 Replies View RelatedIs there a way to see the end result of a pattern as you are creating it?
That is a way so you can see the pattern tiled all over the document. So say you are working on a 100x100 area to be the pattern in layer 1, but you want to see this replicated over an entire document. Maybe you have an overall image/document that is 800x600 say, and you work on the 100x100 area in a layer. Anyway some way of doing is so that when you make a small change in the 100x100 area of the layer you're using for the patter creation, you immdiately see the replicated result of the 800x600 area.
I have been looking all over to try to find a way to create a flat pattern from a 3D model in AutoCAD. I've found several sites saying it can be done on Inventor, but as I do not have Inventor, I would like to know if it is possible to do with AutoCAD, and if so how to do it.
View 4 Replies View RelatedWell, the title pretty much says it all... if you have a pattern set that you've already created, how do you continue to add new patterns to it while keeping those already there? I'm going to end up with a few gazillion of them because I do texture maps in Poser. So I HAVE to be able to keep adding new patterns to the Plaid Set, the Polka Dot Set, the Purple Monkey set... But I can't find this info anywhere.
View 3 Replies View RelatedI'm created the parts successfully with no error, but when I try to create a flatten view it kept giving me error. I notice that some people try to use chamfer to resolve this issue but I tried with no luck. Also, I play around with the gap size and still get the error. How to create the flat view for me so I could learn how to do it.
Inventor 2011
Window 7, 64bits
I am trying to 'keep up' with my students, thought I'd use the Tutorial provided, finished the 2mm_guard...went to Create Flat Pattern and...I've never seen an 'exit' that quick before. I'm running Windows 8.1 on what I thought was a 'magic' Dell XPS 12 -
View 4 Replies View Relatedi'm newbie in customizing tools in autocad especially in creating hatch pattern. i understand that to create new hatch pattern is by adding a new hatch pattern in acad.pat file with specific angle.
my question is is it posibble to create a hatch pattern that can use specific angle follows the object shape?
This is what autocad can do by default this is what i'm trying to create
How to create a circular pattern around the predefined Z axis.
Dim oCompdef As ComponentDefinition
Dim oDoc As PartDocument
Dim oSketch As PlanarSketch
Dim oPart As PartFeatures
Dim oProfile As Profile
[code]...
I have a model of a plywood seat "blank" which I have trimmed by way of an extrusion cut to give the plywood seat its shape. Basically I'll use my modeled shape to CNC rout the shape into the actual blank. However, before I tie up a CNC to make my 1st part I want to create a flat pattern which I will lay on the actual plywood blank and cut it out by hand to see if the shape aesthetically works. I am trying to unfold/ unroll/ flat pattern the shape in inventor (as a sheet metal part) so I can plot it but am not able to do so successfully (fails). Is the shape to complex? I have attached an image of the blank, an image of the finished shape desired and the .ipt. I'm not an expert at sheet metal but I have successfully done this sort of thing before making flat patterns of transition cones etc so I do think I am following the correct procedure but this part is far more complex that I am used to. Also, the model of the "blank" was imported as an iges from my supplier before I made it a thickened surface so I'm afraid inventor doesn't "historically know" how it was created and therefore cannot flatten it.
View 4 Replies View RelatedIs there a way to unfold a coil shape to get the flat pattern? When I try to unfold the attached part I get an error message (see attached error_msg.jpg). We have been using AutoPOL to unfold these kind of shapes (which works fine). But since we have a very old version which we really need to upgrade, I was wondering if nowadays Inventor could handle coil unfolds.
If this will not work with the current IV2013 release, will this then be implemented in a future release? Are there any alternatives or should I just go for the AutoPOL upgrade?
IV2013 Pro SP1
While tracing a tree image using splines for a school project i have run into some problems...I am creating a pattern for a plasma cutter.
When i move the points of my spline sometimes it causes the whole spline to randomly move around and twist and turn where there are no points. Also sometimes when i open the drawing some of the spline lines are out of place while the spline points have not moved.I have tried to constrain all the points but it turned into a mess.How can i stop this from happening?