I'd like to create a pattern so that I can fill a large rectangle with it and have it look like a checkered tablecloth.
I've attached an image of the idea of the pattern, as well the pattern I created and the result, which did not come out the way I wanted. How do I get it to be seamless (repeated with no break)?
Is it normal for my workspace to flash from my gray background to a checkered pattern when I'm working/performing a task in Photoshop?
View 5 Replies View Relatedi'm using illustrator cs5. making a pattern containing a pattern. i have some illustrations that i've put a simple polka dot pattern behind. in order for illustrator to accept it as pattern, i've been expanding the polka dot part before dragging it over to the swatches panel. however, when i do this it slows everything down tremendously and usually makes the system crash.
View 10 Replies View RelatedHaving trouble saving a pattern in 64bit Illustrator? Seems to work fine in 32bit but only saves the original symbol (1 time) in 64. Follow the same procedure in each case, drag symbol (or place own symbol) to library then to document, make pattern (all works fine) but then "save a copy" in 64 only saves the original symbol not the pattern(in my case).... 32bit saves the pattern.
View 5 Replies View RelatedHow can I take these groups of white dots and have them go around the entire object while also taking it's shape?
View 9 Replies View RelatedI am trying to create an infographic that has a circular pattern. I'm hoping there is a streamlined process that allows me to start with a linear set of bars/pattern (with vertical text) and then automatically transforms the set to an evenly-spaced radiating pattern.
Here are some examples of what I would like to achieve: [URL] ....
I know there has to be an easy way to make an image like this (I'm referring to the lines radiating throughout the image.
View 5 Replies View RelatedHow can I make a circular pattern of a single occurence of a rectangular pattern?
A shaft has a rectangular pattern of holes (along its axis) on its surface. I want to pattern the 4th occurence of this hole pattern as a circular pattern? Can I do it in Autodesk. I can not select the a specific occurance of a patterned feature to pattern it again.
How is it possible to use "Feature Pattern Select'' to make the Pattern a want in an assembly?
View 9 Replies View RelatedHow to remove wrinkles from a tablecloth? I have a wedding photo with a tablecloth wrinkled that I want to smooth out.
I can reduce the luminance difference with a luminance mask + curves or exposure layer, then maybe use frequency separation or patch tool, and make it look better, but how to make it look smooth?
I played with the feature a bit and understand how to create the patterns. Problem is when I go to fill in my 12x12 space there are seams. I have chosen different sizes in the pattern window but all show up with seams when I fill the larger space. Am I doing something wrong or is the largest size you can create with this tool seamlessly only 9x9?
View 8 Replies View RelatedI love the new Pattern Maker in CS6, but I keep running into a problem:
When I create a pattern that is NOT tiled in Grid (i.e. Brick), it usually works without any problem. But once I save and re-open the file, opening the pattern in PM again will show this message:
A clipping mask was created around the pattern tile bounds to preserve legacy pattern appearance. For best results, release the clipping mask when changing the tile size or editing art that overlaps the tile edge. I would then find that, instead of a single motif layed out in a Brick tile, I would have one complete motif in the center and four quartered motifs on the corners of one clipping box. This is tiled in a Grid pattern to emulate a Brick appearance.
So long story short, what's supposed to be a Brick tile turns into a Grid tile that's faking a Brick tile.
Is there a way to keep the simple Brick tiles?
in photoshop 7, how do you make a new pattern.
i want to have a gradient of 12px by 50 px and i want to make that into a pattern so that i can have it for later use.
what do i do to make a new pattern.
I am trying to create a pattern like this [URL]... in CorelDraw x4.
It's not something I have tried to do before and I am a newvie to CorelDraw as my new job requires me to use it. My old job required Illustrator CS4/5.
is there a simpler way of creating these patterns or a way of doing less work to create these patterns?can this be accomplished with a formula/ function?
View 4 Replies View RelatedI'm trying to replicate this backdrop. So far this is the best I can achieve. how to make it look closer to the original.
View 5 Replies View Relatedhow to make or paint checkereds over an image.
i want to make the blue and white checkerds on my own image.
Is there a way to see the end result of a pattern as you are creating it?
That is a way so you can see the pattern tiled all over the document. So say you are working on a 100x100 area to be the pattern in layer 1, but you want to see this replicated over an entire document. Maybe you have an overall image/document that is 800x600 say, and you work on the 100x100 area in a layer. Anyway some way of doing is so that when you make a small change in the 100x100 area of the layer you're using for the patter creation, you immdiately see the replicated result of the 800x600 area.
I have been looking all over to try to find a way to create a flat pattern from a 3D model in AutoCAD. I've found several sites saying it can be done on Inventor, but as I do not have Inventor, I would like to know if it is possible to do with AutoCAD, and if so how to do it.
View 4 Replies View RelatedI have a photo of a white shirt with small black checks as a pattern. A large transparent yellow stain needs to be removed. The checks are one tenth of an inch square and one tenth of an inch apart. The original photo is lost and I have it at 200 ppi.
View 1 Replies View RelatedThe background kground. keeps jumping from grey to a checkered background. How do i stop this?
View 11 Replies View RelatedI need removing the "transparent" checkered background. I pasted an image and started erasing everything around it. Once everything was checkered but the picture, I copied and pasted it to another image. Now my selection of this image came with the checkered background. I'm trying to find a way to remove this so only my pasted image shows.
View 4 Replies View RelatedI'm created the parts successfully with no error, but when I try to create a flatten view it kept giving me error. I notice that some people try to use chamfer to resolve this issue but I tried with no luck. Also, I play around with the gap size and still get the error. How to create the flat view for me so I could learn how to do it.
Inventor 2011
Window 7, 64bits
having only used Photoshop elements for about 6 months. I have frequently imported PDFs into Elements, where they always showed up as the background. I could see the information clearly, draw on the PDF, and then save it as a jpeg with the modifications that I made (work project).
However, today the PDFs are showing up checkered (which I read has something to do with transparency). It also is imported with the title "Layer 1" not a background layer, like before.
I edited the transparency preferences to reduce the grid size to "none", but that only created a white block where the PDF should be--the information that was in the PDF didn't show up. It's like the PDFs are not showing up at all when I import them.
I am trying to 'keep up' with my students, thought I'd use the Tutorial provided, finished the 2mm_guard...went to Create Flat Pattern and...I've never seen an 'exit' that quick before. I'm running Windows 8.1 on what I thought was a 'magic' Dell XPS 12 -
View 4 Replies View Relatedi'm newbie in customizing tools in autocad especially in creating hatch pattern. i understand that to create new hatch pattern is by adding a new hatch pattern in acad.pat file with specific angle.
my question is is it posibble to create a hatch pattern that can use specific angle follows the object shape?
This is what autocad can do by default this is what i'm trying to create
How to create a circular pattern around the predefined Z axis.
Dim oCompdef As ComponentDefinition
Dim oDoc As PartDocument
Dim oSketch As PlanarSketch
Dim oPart As PartFeatures
Dim oProfile As Profile
[code]...
I have a model of a plywood seat "blank" which I have trimmed by way of an extrusion cut to give the plywood seat its shape. Basically I'll use my modeled shape to CNC rout the shape into the actual blank. However, before I tie up a CNC to make my 1st part I want to create a flat pattern which I will lay on the actual plywood blank and cut it out by hand to see if the shape aesthetically works. I am trying to unfold/ unroll/ flat pattern the shape in inventor (as a sheet metal part) so I can plot it but am not able to do so successfully (fails). Is the shape to complex? I have attached an image of the blank, an image of the finished shape desired and the .ipt. I'm not an expert at sheet metal but I have successfully done this sort of thing before making flat patterns of transition cones etc so I do think I am following the correct procedure but this part is far more complex that I am used to. Also, the model of the "blank" was imported as an iges from my supplier before I made it a thickened surface so I'm afraid inventor doesn't "historically know" how it was created and therefore cannot flatten it.
View 4 Replies View RelatedIs there a way to unfold a coil shape to get the flat pattern? When I try to unfold the attached part I get an error message (see attached error_msg.jpg). We have been using AutoPOL to unfold these kind of shapes (which works fine). But since we have a very old version which we really need to upgrade, I was wondering if nowadays Inventor could handle coil unfolds.
If this will not work with the current IV2013 release, will this then be implemented in a future release? Are there any alternatives or should I just go for the AutoPOL upgrade?
IV2013 Pro SP1
I am trying to turn a black and white checkered line into a circular shape in photoshop.
View 7 Replies View RelatedWhile tracing a tree image using splines for a school project i have run into some problems...I am creating a pattern for a plasma cutter.
When i move the points of my spline sometimes it causes the whole spline to randomly move around and twist and turn where there are no points. Also sometimes when i open the drawing some of the spline lines are out of place while the spline points have not moved.I have tried to constrain all the points but it turned into a mess.How can i stop this from happening?
