I have read all the topics about rule that save flat pattern (.ipt) as .dxf file. Unfortunately, It doesn't work with Inventor 2012. I found rule by Rob Cohee and it works but it saves all lines. I need dxf file with only outer and inner profile, no bend lines.
View 3 RepliesI created an iLogic rule that allows in a sheet metal part to the informations Length, widht and area of a flat pattern. This rule run and the iproerties are created (see attachment file).
Now, I will run this rule from an assembly file to create automatically, in all sheet metal components, theses iproperties.
Is it possible ? what must I change in this rule ?
I attached the iLogic code which is automatically creating dwg drawing (script borrowed from one of the discussion group users), also it creates 4 views. I`m just wondering how to add flat pattern ?
View 7 Replies View RelatedIs there a way, in an .idw (drawing file) to create a flat view (unrolled) of a cylindrical solid? NOT to be confused with sheet metal. This is from a solid .ipt. Either that or create a flat pattern of a solid cylinder that IS NOT SHEET METAL?
View 2 Replies View RelatedIs there a way to convert an Inventor 2012 view scale from "0.5" to "1:2" or similar within an iLogic rule? I can extract the main view scale and plug it into a variable but the format isn't correct for the drawings I'm creating.
View 2 Replies View RelatedHow to make Automatic Update propeties for Flat Pattern Extens. I have write code and setting rules trigerred by event (Before save, Any model Parameter Change) but if some parameter change properties isn't automatic update. So could some one tell me how to solve this problem.
Part with iLogic code is attached
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I am not good with iLogic but I have this rule that gives me length and width of a sheetmetal part in mm and with , (comma). The rule works but the file will always accept saving regardless if there has been changes or not. I want the rule to only accept save IF there has been changes on SM_Length (=<FLAT PATTERN LENGTH> cm) and SM_Width (=<FLAT PATTERN WIDTH> cm) or Thickness.
sLength = iProperties.Value("Custom", "SM_Length")
sWidth = iProperties.Value("Custom", "SM_Width")
sThickness = iProperties.Value("Custom", "Thickness")
[code]....
Autodesk Inventor/Vault Professional 2013
I am working with inventor 2014 professional now. But There is a problem. it is ( a: 2d translator not installed and b:sketch export failed ) . dxf drawings of sheet metal environment, particularly these problems started recording format.
View 3 Replies View RelatedI am trying to export geometry found in a flat pattern sketch overlaid onto the flat pattern.
Since I am creating the output file manually I gather the flat pattern boundaries and bend center lines for output to a file.
When I add flat pattern sketch entities to the mix they do not overlay properly. What matrix would I have to push the sketch entities through to get them to the same coordinates as the flat pattern?
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
Using Inventor 2012 and using ilogic rule or VB codes to auto Save Copy AS DWG?
My old code error out when debugging. The exact error is on this code line:
DWGAddIn.SaveCopyAs(oDocument, oContext, oOptions, oDataMedium)
Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedI can't find a way to create multi flat patters in one part from a lofted sheetmetal part. Also, didn't the developers fix the 'can't make a flat pattern from a derived part'?
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
I want to create a rule that will warn the user when the plate thickness they are using is not standard. I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.
I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.
I know this can be done, but like I said, Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View Relatedi have an iLogic rule in serveral files. Now this rule has to be deleted. This should be done with VBA. I can not find any function to delete a rule using VBA.
I found a function iLogicAuto.RunRuleDirect(rule), but not iLogicAuto.DeleteRule(rule) ...
I can not find any documentation for iLogic/VBA.
I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
I have a rule setup for drawings. I need the rule to first determine if the there is a flat pattern view present. In other words, if there is no flat patter view, I want to the rule to stop.
I am very green to ilogic and VB. Running Inventor 2013.
I've caught glimpses of how to do this (For instance, this plugin (Inventor LinkParameters) [URL]...... when trying to actually find information on any documentation of how to get from point A to point B. I can't seem to find anything about ilogic automation / rule creation / ilogic in general, in the object browser at all.
I know code like this exists
Option ExplicitSub RuniLogicRule()Dim iLogicAuto As ObjectSet iLogicAuto = GetiLogicAddin(ThisApplication)If (iLogicAuto Is Nothing) Then Exit SubDim doc As DocumentSet doc = ThisApplication.ActiveDocumentDim ruleName As StringruleName = "Rule0"Dim rule As ObjectSet rule = iLogicAuto.GetRule(doc, "Rule0")If (rule Is Nothing) Then Call MsgBox("No rule named " & ruleName & " was found in the [code].......
(and even fixed the error it gave me due to the original code leaving something out) , but any info on the GetRule method is.
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
Is there any command/option to add a keyboard shortcut for ilogic rule?
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
When i trying to create a new ilogic rule i get window with this error:
Spoiler (Highlight to read)System.InvalidCastException: Невозможно выполнить приведение [A]iLogic.CodeSnippets к [B]iLogic.CodeSnippets. Источником типа A является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "Default" в расположении "C:PROGRA~1AutodeskINVENT~1BinAutodesk.iLogic.dll". Источником типа B является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "LoadFrom" в расположении
[code]..........
I would like to make an External Rule that would make an iLogic Internal Rule (with the same code every time). I guess what I really need is a way to drive an Ilogic rule into every part that does not have the rule in the part already.
I know what you’re thinking and just using the External Rule doesn’t work for what I want to do. I need it to be an iLogic Internal Rule.
I have an iLogic rule that I want to add to several files that are already existing. Is there an "easy" way to do this other than opening each and every file, creating a new rule, pasting in the code and then saving the file? If I had a macro that would create the rule I could run it with KwikBatch.
Using R2010/11
Is there someway to launch an external iLogic rule with VBA?. I'd like to add a button to run the iLogic rule.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
Is there a way to set the colour of a part using the RGB value? (or perhaps the hexdecimal value?)I know I can set colours in iLogic by specifying an existing colour (ex... iProperties.PartColor = "Green")
I want to avoid adding the colour to Inventor as a custom colour, then referencing it in iLogic... The goal is, if a user specifies the finish on this part to be this colour, it will always be that RGB value (our standard in-house paint colour). I don't want to add it to the Inventor 'colors' design data... when we upgrade to the next version of Inventor, it's one more item we have to remember to carry over!.
I got this error popping up every time I open an iLogic edit rule and all my snippets are gone. Now it has started doing it on a different computer in our office. The error dialog box is in the image below. T
View 4 Replies View Related