I have an iLogic rule that I want to add to several files that are already existing. Is there an "easy" way to do this other than opening each and every file, creating a new rule, pasting in the code and then saving the file? If I had a macro that would create the rule I could run it with KwikBatch.
Using R2010/11
I have the need filter inside Vault the Inventor Drawings (.dwg/.idw) by its papersize.
In my testing enviroment, I created a iLogic rule inside a .idw with the following
iProperties.Value("Custom", "Formato") = ActiveSheet.Size
I used the Ruler Trigger "After Save Document" to refresh this rule.
In Vault, I've mapped this custom property:
But, how to Copy (and update) this iLogic Rule to the other existing .dwg files in Vault?
I thought the iLogic Design Copy would be able to do so, but it doesn't works in that way.
see attached link for the explaination of what I am looking for.
[URL]
Is there a way to invoke the iLogic Rule Editor and pass it an existing rule name or external rule for editing?
View 4 Replies View RelatedI need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I want to simply set a custom iproperty as the Description in each part file within my assembly. I can do this easily at part level with ilogic but I want to be able to run the rule from the assembly level and all the parts run the rule. I am struggling to find a way to do this.
I think this may be the best method I have found but I think it must be far easier?
[URL].......
I am working for customer with a simple item with his iLogic design. He has created a simple form to modify his iProperties. To modify the current material, a multi-value parameter was created and the following rule as a local rule;
"MultiValue.List("MATLIST") = iProperties.Materials
iProperties.Material = MATLIST"
He is now trying to make this an external rule but gets the following error
Error in rule: Mat2, in document: Mat2.iLogicVb
iProperties.Material: is probably a bad material name.
The more info tab says:
System.ArgumentException: iProperties.Material: is probably a bad material name.
at iLogic.CadPropertiesInRule.SetDocMaterial(Document doc, String matName)
at LmiRuleScript.Main()
at Autodesk.iLogic.Exec.AppDomExec.ExecRuleInAssembly(Assembly assem)
at iLogic.RuleEvalContainer.ExecRuleEval(String execRule)
how can I close an iLogic Form from either an iLogic Rule, or a VBA Rule (VBA is the Preferred method)?
View 5 Replies View RelatedI want to create a rule that will warn the user when the plate thickness they are using is not standard. I have already created a multivalue parameter for plate thickness, which lists all standard steel plate thickness's and also allows for custom values.
I was hoping I could create a rule that would prompt a dialogue box warning when the user creates a custom value for plate thickness.
I know this can be done, but like I said, Im bloody useless with iLogic and find it hard to come across relevent examples and/or tutorials online.
I'm currently using this rule for easy PDF making
SaveLoc = "C:Temp"FileName = ThisDoc.FileName(False)Revnr = " rev_" & iProperties.Value("Project", "Revision Number")PDFnaam = SaveLoc & FileName & RevnrThisDoc.Document.SaveAs(PDFnaam & (".pdf") , True)MessageBox.Show("PDF is aangemaakt in C:Temp", "Document creation",MessageBoxButtons.OK,MessageBoxIcon.Information)
The problem with this is that i want to save without lineweight? is there anyway to do this with this code?
I have an ilogic rule with multiple Subs. How could I run one specific sub contained in that rule from an iLogic form or another rule?
View 2 Replies View Relatedi have an iLogic rule in serveral files. Now this rule has to be deleted. This should be done with VBA. I can not find any function to delete a rule using VBA.
I found a function iLogicAuto.RunRuleDirect(rule), but not iLogicAuto.DeleteRule(rule) ...
I can not find any documentation for iLogic/VBA.
I have an iPart which includes iLogic Rule. When I change iPart by table, iLogic Rules are not triggered.
In iLogic Utilities, there is a button "Rules Triggered by Events", If I use "Any Model Parameter Change", the update need long time, looks like Inventor is "No Response". I like the way "Material Change", but I need "part Number" change to trigger the rules. How can I do it? I tried other events as After Open, Before Save, etc, they are does not work.
I have a rule setup for drawings. I need the rule to first determine if the there is a flat pattern view present. In other words, if there is no flat patter view, I want to the rule to stop.
I am very green to ilogic and VB. Running Inventor 2013.
I've caught glimpses of how to do this (For instance, this plugin (Inventor LinkParameters) [URL]...... when trying to actually find information on any documentation of how to get from point A to point B. I can't seem to find anything about ilogic automation / rule creation / ilogic in general, in the object browser at all.
I know code like this exists
Option ExplicitSub RuniLogicRule()Dim iLogicAuto As ObjectSet iLogicAuto = GetiLogicAddin(ThisApplication)If (iLogicAuto Is Nothing) Then Exit SubDim doc As DocumentSet doc = ThisApplication.ActiveDocumentDim ruleName As StringruleName = "Rule0"Dim rule As ObjectSet rule = iLogicAuto.GetRule(doc, "Rule0")If (rule Is Nothing) Then Call MsgBox("No rule named " & ruleName & " was found in the [code].......
(and even fixed the error it gave me due to the original code leaving something out) , but any info on the GetRule method is.
Is there any way to create a rule to create a substitute on my weldment files?
what I need is something like:
If this document file type is weldment then create shrinkwrap substitute, go to the file (substitute) read the custom iproperty "area" and write to this document custom iproperty "area for sand-blasting" activate LOD Master then delete substitute LOD.
The propose is for purchase department to know the area of the assembly (only the area of visible surfaces).
Is there any command/option to add a keyboard shortcut for ilogic rule?
Config :: Intel (R) Xeon (R) CPU E31245 @ 3.30 GHz, 16.0 GB, 64bit win7
Inventor 2013 and Vault Basic 2013
When i trying to create a new ilogic rule i get window with this error:
Spoiler (Highlight to read)System.InvalidCastException: Невозможно выполнить приведение [A]iLogic.CodeSnippets к [B]iLogic.CodeSnippets. Источником типа A является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "Default" в расположении "C:PROGRA~1AutodeskINVENT~1BinAutodesk.iLogic.dll". Источником типа B является "Autodesk.iLogic, Version=17.0.13800.0, Culture=neutral, PublicKeyToken=null" в контексте "LoadFrom" в расположении
[code]..........
I would like to make an External Rule that would make an iLogic Internal Rule (with the same code every time). I guess what I really need is a way to drive an Ilogic rule into every part that does not have the rule in the part already.
I know what you’re thinking and just using the External Rule doesn’t work for what I want to do. I need it to be an iLogic Internal Rule.
Is there someway to launch an external iLogic rule with VBA?. I'd like to add a button to run the iLogic rule.
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
Is there a way to set the colour of a part using the RGB value? (or perhaps the hexdecimal value?)I know I can set colours in iLogic by specifying an existing colour (ex... iProperties.PartColor = "Green")
I want to avoid adding the colour to Inventor as a custom colour, then referencing it in iLogic... The goal is, if a user specifies the finish on this part to be this colour, it will always be that RGB value (our standard in-house paint colour). I don't want to add it to the Inventor 'colors' design data... when we upgrade to the next version of Inventor, it's one more item we have to remember to carry over!.
I got this error popping up every time I open an iLogic edit rule and all my snippets are gone. Now it has started doing it on a different computer in our office. The error dialog box is in the image below. T
View 4 Replies View RelatedWe are using Inventor 2011.
I have found a rouind about way to display document thumbnails in VBA in 64 bit windows 7 inventor.
The only piece of the puzzle I am missing is for a way to push a document object or a document file name into an iLogic Rule from VBA.
Below is a 64 bit thumbnail solution for VBA sans the input.
Essentially I am launching an iLogic Rule from VBA that pushes an inventor document object into a VB.NET dll.
The dll converts the iPictureDisp into a VB.NET image object, reduces the size then converts it into a byte array.
The byte array is passed back to VBA through the same iLogic Rule.
Once the byte array is received it is converted back into an iPictureDisp object.
' ----------------------------------------
' --- VBA Project Form Code ---
' ----------------------------------------
Option Explicit
Private Sub Command1_Click()
End Sub
' -------------------------------------------
' --- VBA Project Module Code ---
' -------------------------------------------
Option Explicit
Public Sub SetPic(ByRef bBuffer() As Byte)
Set UserForm1.Pic.Picture = PictureFromRes(bBuffer)
End Sub
[Code]....
I have a rule in iLogic that I was testing as "Straight VB.Net" on various assemblies. It was working alright, but I was making some minor tweaks to eliminate errors. Now, all of a sudden, it is unresponsive. Completely. No errors, no "busy" symbol over my pointer, just nothing. I put in the line MsgBox("Begin") as the first line of the program to see if it was even getting into it, and still there is no response. I run the rule, and absolutely nothing happens. I tried writing it in iLogic instead, and that does make something happen. what might cause the VB.Net element of iLogic to stop working, and hopefully how to correct the problem as well?
View 2 Replies View RelatedI have been using a simple rule to export IDW drawings to ACAD 2000 DWG format using Inventor 2011. I upgraded to Inventor 2012 Pro past weekend and am having problems running Ilogic Rules.
Running the rules on Inventor 2012 Pro either manually or using Triggers errors out. The same rule run using Inventor 2011 works ok. The code I have is direclty from the My Snippet> Export DXF from IDW. All occurences of "DXF" were replaced with "DWG". Here is the complete
' Get the DWG translator Add-In.
Dim DWGAddIn As TranslatorAddIn
DWGAddIn = ThisApplication.ApplicationAddIns.ItemById("{C24E3AC4-122E-11D5-8E91-0010B541CD80}")
'Set a reference to the active document (the document to be published).
Dim oDocument As Document
oDocument = ThisApplication.ActiveDocument
[URL]........
Below is the error message. I don't know what this is but the DWG and DXF translators ADDIN may not be loading up. I have loaded them manually using ADDIN Manager but I continue to get this error.
I dont no in english if odd number is the right word but i want to make all my number to 1, 3, 5, 7, 9, etc,....
View 9 Replies View Relatedwhy this will not run as an external rule? It runs fine as an internal one.The error I get is object referance not set to an instance of an object?
'Updates rule when done
iLogicVb.UpdateWhenDone=True
'Creates input list dialog box & allows the user to choose the state
Product_Code=InputListBox("Enter Product Code", MultiValue.List("Product_Code"), Product_Code, Title :="Product Code", ListName :="Available Codes")
'Writes values to iProperty
iProperties.Value("Project", "Cost Center")=Product_Code
The setup is: I have a rule which first gets a number of user parameters via input boxes.This rule then runs a number of other rules, using:
iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")iLogicVb.RunRule("Rule 3").Each of these rules control parameters, part/feature/constraint suppression etc. in the top level and subassemblies/parts based on the previously obtained user parameters.
All the rules have the 'Don't run automatically' option selected, so all should only run as intended when I manually run the first rule.When I run the first rule, I enter all the parameters, and the subsequent rules run.The problem is, the suppression states etc. in the subassemblies/parts do not update.
Looking at the parameters dialog box after the rules have run, all user parameters have updated with the new values.If I run the first rule again the subassemblies/parts update correctly.
It appears that the rules that control the suppression states etc. of the subassemblies run using the initial values of the user parameters, i.e. the values as they were before the user input is obtained, rather than the new values.This is confusing me, as the code is structured as follows:
user_parameter_1 = InputBox("User Parameter 1", "Input", "xx")user_parameter_2 = InputBox("User Parameter 2", "Input", "xx")iLogicVb.RunRule("Rule 1")iLogicVb.RunRule("Rule 2")
Created in the template sheet metal rule. Why External ilogic rule is not working? User-valued parameter is created, sheet metal rule does not change.
name = ""For Each par In ThisDoc.Document.ComponentDefinition.Parameters.UserParameters If par.Name = "SMR" Then name = par.Name Exit For End IfNextIf name = "" Then Dim MyArrayList As New ArrayList For Each st In ThisDoc.Document.ComponentDefinition.SheetMetalStyles MyArrayList.add(st.Name) Next ThisDoc.Document.ComponentDefinition.Parameters.UserParameters.AddByValue("SMR", "", UnitsTypeEnum.kTextUnits) MultiValue.List("SMR") = MyArrayList Parameter("SMR") = SheetMetal.GetActiveStyle()End IfSheetMetal.SetActiveStyle(Parameter("SMR"))iLogicVb.UpdateWhenDone =TruePS:
I Created an iLogic Rule that sets up some parameters.
I want to Automatically opens each and every Part in my assembly, run this Rule, and then save it without me having to do so manually.
I am not good with iLogic but I have this rule that gives me length and width of a sheetmetal part in mm and with , (comma). The rule works but the file will always accept saving regardless if there has been changes or not. I want the rule to only accept save IF there has been changes on SM_Length (=<FLAT PATTERN LENGTH> cm) and SM_Width (=<FLAT PATTERN WIDTH> cm) or Thickness.
sLength = iProperties.Value("Custom", "SM_Length")
sWidth = iProperties.Value("Custom", "SM_Width")
sThickness = iProperties.Value("Custom", "Thickness")
[code]....
Autodesk Inventor/Vault Professional 2013