AutoCAD Inventor :: Automatic Scale In The Drawing Table?
Jan 6, 2010It is possible to put scale on drawing in inventor 2010? If is how?
View 4 Replies
ADVERTISEMENT
AutoCAD Inventor :: ILogic Automatic Drawing View Scale Label
Apr 17, 2012what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
AutoCAD Inventor :: Automatic Drawing Creation
Mar 13, 2013I've been making iLogic assemblies with hints of VB for about 6 months now. My Boss has asked me if I can write code that will effectively create drawings automatically.
What we would like to create is a rule, which when run, creates a new drawing file, places the active assembly in a base view, then place a Left, Right and Top view of the assembly and place a parts list in the top corner. Dimensions are not really important at the moment, as the sizes of the parts are in the description field and the drawings are used for assembling the product only.
AutoCAD Civil 3D :: Force Table And Table Text Height To Stay Constant Despite The Scale?
Feb 23, 2012Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
AutoCAD Inventor :: ILogic Automatic Change Of Drawing Title Block?
Nov 13, 2013I am currently working with fx parameters and iLogic to drive a model and it's corresponding drawing to change based on a single user parameter.
I have managed to get the drawing to update both the scale of the views I need and the size of the sheet with the change in parameter using the following rule:
IfParameter("EB75551.ipt.Rise")<1801Then
ActiveSheet.ChangeSize("A1", MoveBorderItems :=True)
ElseIfParameter("EB75551.ipt.Rise")>1800Then
ActiveSheet.ChangeSize("A2", MoveBorderItems :=True)
EndIf
However when i attempt to use this with the title block using the function:
ActiveSheet.TitleBlock="My Title Block"
in place of the sheet change size it brings up the error message:
Error in rule: Drawing Title Block, in document: Drawing
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have read elsewhere that this is due to me having prompted entries for the scale and drawn by fields, however when i use the function designed for prompted entries: ActiveSheet.SetTitleBlock("Other Title Block", "promptedEntry1", "promptedEntry2")
It fills in the prompted entry fields from the code and if i change these entries in the "edit field" option they are overwritten when it is updated.
Is there a way have the prompted entries when you open the drawing fill in the "promptedEntry1" field in the rule so that I can use the rule? Or am I going about it the wrong way?
I should point out i'm new to iLogic and no-one in my workplace can use it so each person changing the "promptedEntry1" field to the scale they wish isn't a wise move.
AutoCAD 2013 :: Automatic Alternating Background Fill For Table?
Sep 24, 2013know of a way to automatically alternate a background fill color for every other row on a table (gray, white, gray, white, etc.)? I can set up the fill color manually for each row, but if I delete or add a row, I have to manually redo the alternating fill color.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
AutoCAD Inventor :: Coordinate Table On Drawing
Jun 25, 2010I have created some reference points on a part. I have a need to include a table on the drawing of this part that shows the x,y,z coordinate positions of each of those points relative to the coordinate system origin. I have been trying to figure out a way to extract this information from the part to create source data to place into a table on the drawing.
View 3 Replies View RelatedAutoCAD Inventor :: In A Drawing - Table Members Don't Show
Nov 18, 2013I made a table in the file and also split the part into 2 solids.
In the drawing, when i choose the first table mamber it shows both. when i choose to show the active member it shows the first member only (as i want).It didn't happen before i split the part.
My zip program doesn't know to include only the subfolder with the generated table files, only the whole path. i hope you will manage to generate the files, if not-i will add them with the whole path
AutoCAD Inventor :: Linking Drawing Dimensions To A Table
Apr 25, 2012Is it possible to link the dimensions in my .idw to the table in the upper left corner? I want the information in the table to reflect what is in the drawing.
I'm using Inventor 2012
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Update Table In Drawing - IPart Active Row
Feb 27, 2013I have two tables on a drawing one showing a parts list the other changes to dimensions.
The table to show the dimension changes is a configuration table pointing to an ipart.
iLogic is used to update the ipart but you have to right click to update the Active Member in the ipart to see the drawing update.
Is there a way to automate the 'update active member'? (on the ipart table - this does update the drawing)
I just have the one row in the table, it's purpose was to pass the values onto the drawing (as the part resizes I didn't want the dimensions moving so opted to tabulate them) - hoping they would update!
or
Is there a way to have a table update parametrically i.e. I've tried .csv as a source to the table but can't force an update. This way I could scrap the ipart & just import the values to a table.
The table also includes some txt comments which change with the ipart properties.
AutoCAD Inventor :: Can Set A Drawing Scale
Jun 22, 2012Can I set a drawing scale? If I want to print 1:2, 2:1 and so on? If so how?
View 8 Replies View RelatedAutoCAD Inventor :: Standard Revision Table Location In Drawing Template?
Jun 26, 2012Inventor 2013-
Is there a way to pin or standardize where a revision table is located in a drawing?
I have a title-block set up and would like a revision table either embedded or populated upon command, just above my title-block. It would also need to extend upward with additional revisions...
AutoCAD 2010 :: Automatic Linetype Scale Update In Viewport?
Oct 25, 2013I'm sure I had linetype scaling updating automatically after a change of viewport scale - perhaps it was a previous release of AutoCAD. Why must I now keep pressing REGENALL to update the linetype scale?
View 2 Replies View RelatedAutoCAD Inventor :: Scale Dimensions In IDW Drawing?
Jan 11, 2013I'd like to take a set of ordinate dimensions and multiply all the values by 10. Is this possible, without overriding the values and making them static?
The reason I'm asking is because I'm making a flat layout sketch for pockets around a drum. So imagine taking a drum and rolling it out flat. In the direction along the drum I drew it as 1" = 1" and for the circumfrence direction I did 1" = 10° so I don't have sketch that is 13" x 360". So I need to scale the dimensions in 1 direction up by 10.
AutoCAD Inventor :: IPart Factory Table On Drawing Show Equation Not Value For Parameters
Oct 21, 2008I have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedAutoCAD Inventor :: ILogic Drawing Views Scale
Apr 18, 2013I'm trying to put together some iLogic code to either check all the drawing views within a drawing sheet are all the same scale, or make the views all the same scale. These drawing sheets consist of a number of individual parts (they aren't projected views from a single part).
This is for welded assemblies. We are required to generate a profile drawing sheet outlining each part that makes up the assembly. We send these out as dwg files for laser cutting so its important that the views are all the same scale.
AutoCAD Inventor :: Drawing View Scale Default
Oct 7, 2011Is there a way (IV2012) to have the drawing view default to 1:1 when inserting a detail into the sheet? Now it tries to select a scale based on who knows what.
View 8 Replies View RelatedAutoCAD Inventor :: Set Drawing Scale To Title Block?
Oct 26, 2011Is it possible to set the drawing Scale to the Title Block? Seems like it is missing parameter...
View 8 Replies View RelatedAutoCAD Inventor :: ILogic And Changing Scale Of A Drawing
Nov 16, 2010I have a piece of equipment that changes from 24" to 96" with 5 discrete sizes. I am using ilogic to make all the changes required to the part. Any way that I can change the scale of a drawing using iLogic so that it fits better on my drawing and be adjusted every time. I have multiple pages that most of the drawing views need to be changed every time.
View 9 Replies View RelatedAutoCAD Inventor :: Set View In Drawing By Size And Not Scale?
Jan 17, 2013I can control the size of my main drawing views using ilogic based on the models extents as there is a direct relationship between a parts length and the drawing view width. however, I have several isometric views that I scale according to the model size but in certain configurations of my model the ISO’s are completely the wrong scale for that particular view where the main views are ok.
I have a set area on my drawing sheet for the iso view and it would be more beneficial to control the size of the view rather than the scale of the view. I can read the height and width of a view so why can’t I control the size of a view but the height or width?
AutoCAD Inventor :: Scale Detail Cross-section Hatching In Drawing?
Aug 7, 2013Is it possible to scale the cross-hatching in a detail that was created from a section view so it looks better with the scale of a detail? If the scale factor of a detail is much larger than its parent, the cross-hatching is very sparse and detracts from clarity rather than adding to it.
View 2 Replies View RelatedAutoCAD 2013 :: Scale Of Drawing Field Versus Scale Of Object
Jun 27, 2013When I open a new drawing in my AutoCAD 2013 that I just recently installed last week, I encounter a problem that I am not familiar with from previus versions of AutoCAD I have worked on. First of all, the units default to decimal, and I want them to default to architectural, with feet and inches. I have to type UNITS in the command line every time I open a new drawing in order to adjust this. I have AutoCAD for Architecture 2012 on another computer, and the program automatically defaults to architectural units upon opening up. Just to let you know, the program I am having this difficulty with is part of a package called Autodesk Building Design Suite 2013. I was under the impression that it included AutoCAd for Architecture, but I think it has only standard AutoCAD.
The scale of the objects I draw vs. the scale of the drawing field is very out of proportion. What I mean is, when I open a new drawing and draw a 30' -0" line, the line appears so long on the screen that I cannot see the whole object, even if I zoom out to the maximum. I should be able to see the object in it's entirety. In fact, when I draw a line that is only 12" long, even when the zoom is all the way out, the line looks huge in length. I have tried adjusting the units to the architectural/inches setting of course, and I have tried adjusting the scale in model space from 1:1 to 1/4'=1'-0", but nothing is working.
Photoshop :: Scale Images In Series (automatic)
Jul 25, 2011you know if it's possible to scale a image in differente sizes automatic. f.e. I have a image 1200x2000 an I would like to get 3 new images like 800x1000, 500x700 and 350x500 AUTOMATIC and without programming. It would be possibe with photoshop?
View 1 Replies View RelatedAutoCad :: Understanding Drawing Scale And Scale Factor?
Jul 8, 2004I am having some problems getting the hang of applying the drawing scale to my assignment. I understand the scale factor that is applicable to the printing only and that AutoCAD doesn't care about the units used...but something is not clicking here and I'm sure it is pretty simple. My assignment requires me to draw 3 simple structures at 1/8" scale on 11X17 paper. Each house is 20' long with 10' walls and each is done in absolute, relative, and polar. I actually completed the work with all 3 formats without specifying the scale or paper size, just to get familiar with the commands. But now that I am trying to set the dimensions correctly, I cannot replicate my work because I'm getting lost in the way things are defined. I am using AutoCAD 2005, also have a 2002 version to which I can defer.
View 9 Replies View RelatedAutoCAD Inventor :: Bend Table Error / Angle Or Radius Are Outside Table Boundaries
Mar 15, 2012The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedAutoCAD Inventor :: Table Driven IFeatures In A Hole Table?
Oct 16, 2013I have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
AutoCAD Civil 3D :: Surface Legend Table Print To Scale?
Apr 12, 2012I ma trying to print surface legend table to scale. I changed settings in model space, but I am not able to set it up to scale in layout (paper space).
View 1 Replies View RelatedAutoCAD .NET :: Proper Way To Scale A Table / ScaleFactors Doesn't Work
Dec 25, 2011I am trying to scale down a table by half and "scale factor doesn't work. Am I doing something wrong ? it always come in original size and not scale - I tried to put the line before transaction and after appent and before , Here is Code.
Using tr As Transaction = Mydb.TransactionManager.StartTransactionDim btr As BlockTableRecord = tr.GetObject(Mydb.CurrentSpaceId, Open Mode. ForWrite) btr.AppendEntity(tb) tr.AddNewlyCreatedDBObject(tb, True)tb.ScaleFactors = New Scale3d(0.5) tr.Commit() End Using.
AutoCad :: Automatic Isometric Drawing From Top / Side And Front Views
Oct 6, 2011I am trying to create an automatic isometric drawing from the top, side and front views...
View 9 Replies View RelatedAutoCAD 2010 :: Change Drawing Scale In Drawing Settings
Jul 25, 2012I realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedAutoCAD Inventor :: Change Drawing Scale With ILogic Upon Parameter Change
Jul 8, 2013I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.