i would like to have a page number in idw automatically ad when i added a page it will indicate "page 2", is it possible?
at the moment , i manually type a text annotation for page # for each page.
inventor 2011
vault 2012
When we insert a Revision Table to a drawing we have the option to update Revision Number property in the drawing. This property is updated whenever we add a Revision Row.
I want Inventor to update the Revision Number property in the model the same way.
If this is not possible, is there a way to automatically map the Revision Number property in the drawing to the Revision Number property in the model?
I had some sheets that I wanted to hide so I clicked exclude from count and exclude from printing.
Now I want to put them back, if I uncheck the boxes the page numbers don't show up in the border. Neither will if give a page number to the pages that were previously hidden in the browser.
Inventor 2013
Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
I work with CorelDraw X5 and I wonder if there is a way to insert an application of page numbering that is automatic, which automatically update the page when I add or remove a page, as in the word.I got a number through the macros but the problem is the numbers are fixed and not change. And numeracy not appear on new pages.
View 4 Replies View RelatedMy current photo editing software (Microsoft PhotoDRaw) has the ability to do this and wondering if I can achieve the same in CorelDraw X5 or PhotoPaint Pro X3. I just reinstalled both and need to start using them since PhotoDraw only work up till Windows XP and I use Virtual Machine to run it.
Here you go. If say I open a new project to any page size of my choice and import any image (any size) into the page. Is there a way I can automatically fit the page to the image size in either CorelDraw X5or PhotoPaint X3? That is, if my default page size is letter (8.5"x11") and I import an image that is 2.2"x5", can I automatically fit the default page to the fit the image at 2.2"x5"? Really very handy too. Can I also do the reverse image to paper size? If I can do either, where do I go?
The page numbers in the print module are beyond the edge of the prints my printer generates. Is there any way to change the location of the page number?
View 2 Replies View RelatedIs there any way different than drag and drop for moving pages in multiple pages designs. I have some presentation designs lately and have to change pages numbers or move multiple pages.
Drag and drop is not user friendly on 30-50 pages documents.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
If I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
I found the page number option in the prepress menu. that is coreldraw adds page number in the bottom centre to all the pages. Is it possible to edit the font and location of page number?
Till now i have been using page numbering macro that's built inside coreldraw by default. but its not dynamic. i have to do page number all by start if i delete a page in my document.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
How do I renumber a page, starting at any number, eg 120.Reason: I have a catalog, divided into 4 files, gives the first page 1 to page 50, the second page gives the 51 to 100 and so on .. are 214 pages .. how do I get in this second part, put the number of pages, starting with page 51?
View 1 Replies View RelatedPage No. font size change when save a cdr file from corel x6 to x5
see images
Download this image here [URL] ..........
We are looking for a way to export BOM's without having to open individual IDW's.
We were unable to find such a function in either Inventor or Vault Workgroup. We have found customized function for export but each file has to be opened. Is there such a function available that we might have missed or third party?
We are currently working with 2011 versions of Inventor and Vault Workgroup, soon to be migrated to 2013.
I've recently changed idw template and since then when I put part view into new draft the file name don't change into source file name.
In standard template, when I save the .idw file it automatically propose name that is equal to source .ipt and .iam. Why when I'm saving files it won't propose file name the same as the source ipt file name?
I am trying to have Inventor to automatically export a SAT file when I close the program, I have searched the discussion boards and have not been able to find any post about automatic export in Inventor or Revit.
Goal:
My goal is to have Inventor to automatically export a SAT file in order to have those who are using Revit MEP to always have a updated version of the Inventor Model in their model drawing and vise versa.. This I think would take the human factor out of the equation, WHY?.. well we humans tend to forget about those working around us and are not that good in exporting a updated file every day!
I have included some surfaces as run off's but when automatic is select - my chosen surfaces are ignored & a mishmash of surfaces result - can the auto run off feature be edited?
View 2 Replies View RelatedWhen I setup my model for the FEA and hit Automatic Contacts, no contacts are detected .... You can see in the image I posted that Automatic Contacts is greyed out (once applied) and no Contacts are in the the Folder. I have ensured that my assembly contraints are valid and that they are indeed mated (face to face) - see image below. The Manual Contacts will work, but that kind of defeats the purpose of having the Automatic one. I have never altered any options or settings within the Simulation. I am using INV 2013 Pro. Most of the pieces in my assembly are 2x2x0.125 HSS (right out of CC).
View 6 Replies View RelatedI've been making iLogic assemblies with hints of VB for about 6 months now. My Boss has asked me if I can write code that will effectively create drawings automatically.
What we would like to create is a rule, which when run, creates a new drawing file, places the active assembly in a base view, then place a Left, Right and Top view of the assembly and place a parts list in the top corner. Dimensions are not really important at the moment, as the sizes of the parts are in the description field and the drawings are used for assembling the product only.
I want to create some universal bricks creations. These bricks have studs which fit into another brick. To constraint them I need to do following actions:
- click place constraint
- Assembly >> Insert >> opposed
- Offset 0,35mm.
I would like to make above into 1 action, so just click to add this action, then select the 2 faces to constrain.
Is there a way to turn off automatic isometric view when returning to the model from a sketch view (in 2012)?
View 5 Replies View RelatedIt is possible to put scale on drawing in inventor 2010? If is how?
View 4 Replies View RelatedI have created master assembly that has rules to 'save as' the assembly and parts to different locations and with different names. This master assy has links to excel file to get different names
In the same way I am looking the drawings (for both assy and parts) needs to be created and 'save as' to different locations. These newly generated drawings should have links to newly created parts/assembly.
I am able to 'save as' the master drawings to different locations but these newly created drawings still has links to master assembly/parts.
I have my autocad drawings setup that in the corner of all autocad drawings the time and date changes everytime you open drawings in autocad. i want to do the samething for my inventor drawings.
View 3 Replies View RelatedAbout Substitute Shrink wrap parts, it doesn't automatic update when I use UPDATE or even REBUILD ALL inside the LOD with it, even if I don't break the link with the assembly it doesn't update, so I have to go in each assembly with Substitute parts ( with are many in huge projects) and then verify with "Check for updates" in the correct LOD (which in some cases are more than one per assembly). Is there a way to update them direct from the main assembly with rebuild all or something like that ?
View 1 Replies View RelatedI'm currently working on a model and it annoys me a bit that whenever i create a new Sketch a Center Point is created automatically (okay thats quite useful for the first sketch) and when I create a sketch on a face of an extrusion, the shape of that face is automatically projected as lines in my new sketch.
Usually I don't need that "projection" - is there a way to disable this feature?
I'm using Inventor Professional 2014 Student edition.
PS: I just noticed that I can't snap to center and corner points after deleting the projected shape.
Dont have a before print Event Triggers . I want to make a rule with automatic print with a right sheet size, but in all my try don't work
that is my last one
'Dim oDraw As Document
oDraw = ThisApplication.ActiveDocument
oDrawDoc = ThisApplication.ActiveDocument
oDrgPrintMgr = oDrawDoc.PrintManager
[code]........
what i am trying to do is create an iLogic rule that if your drawing view scale is set to the following ...
1:1, 1:2, 1:4, 1:8, 1:12, 1:!6, 1:24, 1:32, 1:48, etc. on the view label for that view it will diplay ...
SCALE: 1/2" = 1'-0"
and so on for the rest for the standard scale factors.
i know it will be some sort of a loop and it needs to check all views when ran for any changes.
i have never done any coding for the drawing side of inventor yet only model coding
How to make Automatic Update propeties for Flat Pattern Extens. I have write code and setting rules trigerred by event (Before save, Any model Parameter Change) but if some parameter change properties isn't automatic update. So could some one tell me how to solve this problem.
Part with iLogic code is attached
I have one problem in ilogic i developed the model using ilogic rules and dimension values updated through the User interface form.
problem is while entering the values in UI, model updates automatically, but I want to stop automatic update and after entering the all the parameters in the UI then click the done button only update the model.
My UI is like this
It's possible.
I am looking for solution for my problem which concerned placing a lot of standard elements in assembly. The assembly is a frame which consists of standard profiles and those elements are standard fasteners. All from item24. I have 3-5 fasteners in library (about 200 of every kind in assembly) which are placed in standard way (three constraints). The frame is a normal assembly, not a frame generator, unfortunately. What I want is a way or functionality for placing those fasteners in fast way with ability to choose proper geometry of profiles and other parts (holes).
The best way would be to use it like bolts and washers from content center with idrop/i-drop functionality. I have never published my own library to Content Center, but yesterday I spent a lot of time reading that its hardly possible to use this i-drop for personal purpose. I found only opinions, but no examples.
Another nice thing would be the ability to have constraints preloaded at the moment of placing element in assembly and select only proper geometry of profiles and parts in proper order. I'm thinking of i-mate with only one half (I haven't use them much). Unfortunately I haven't managed to do that using i-mates - they start working only when there is another part with i-mate in assembly and pair with them. I couldn't find any materials about how to use i-mates in a way I have described. I don't want to use alt+drag.
Is there a way to speed up placing 3000 constraints in several projects?
I am using Inventor 2011.
I am currently working with fx parameters and iLogic to drive a model and it's corresponding drawing to change based on a single user parameter.
I have managed to get the drawing to update both the scale of the views I need and the size of the sheet with the change in parameter using the following rule:
IfParameter("EB75551.ipt.Rise")<1801Then
ActiveSheet.ChangeSize("A1", MoveBorderItems :=True)
ElseIfParameter("EB75551.ipt.Rise")>1800Then
ActiveSheet.ChangeSize("A2", MoveBorderItems :=True)
EndIf
However when i attempt to use this with the title block using the function:
ActiveSheet.TitleBlock="My Title Block"
in place of the sheet change size it brings up the error message:
Error in rule: Drawing Title Block, in document: Drawing
The parameter is incorrect. (Exception from HRESULT: 0x80070057 (E_INVALIDARG))
I have read elsewhere that this is due to me having prompted entries for the scale and drawn by fields, however when i use the function designed for prompted entries: ActiveSheet.SetTitleBlock("Other Title Block", "promptedEntry1", "promptedEntry2")
It fills in the prompted entry fields from the code and if i change these entries in the "edit field" option they are overwritten when it is updated.
Is there a way have the prompted entries when you open the drawing fill in the "promptedEntry1" field in the rule so that I can use the rule? Or am I going about it the wrong way?
I should point out i'm new to iLogic and no-one in my workplace can use it so each person changing the "promptedEntry1" field to the scale they wish isn't a wise move.