AutoCAD Inventor :: Title Block - Assign Static Sheet Letter And Changing Page Number
Nov 7, 2011Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
ADVERTISEMENT
AutoCAD Inventor :: Sheet Number In Title Block?
Aug 19, 2013I placed a Sheet Propertie called Sheet Number in my title block.
I want only my sheet number in my title block and not the follow number.
I found the code made bij Curtis Waguespack and changed Mid to Left.
In the message box it shows the number i want but in the title block it shows only the follow number.
My sheet number is 400:1
why dusn't show only the number 400 in the titleblock?
DimoSheetAsSheet
DimSheetNumberAsString
i = 1
ForEachoSheetInThisApplication.ActiveDocument.Sheets
SheetNumber = Left(oSheet.Name, InStr(1, oSheet.Name, ":")- 1)
MessageBox.Show(SheetNumber, oSheet.Name)
i=1+1
Next
AutoCAD Inventor :: Retaining Title Block Prompted Entries When Changing Title Blocks
Apr 26, 2013The title blocks that we use have prompted entries in them and I would like to find a way using iLogic to copy the entries from one title block to another within the same drawing; i.e.. if the user decides to change from an A2 to A1 drawing.
I already have an iLogic rule which allows the user to change the active border, title block and sheet size based on a form selection but would like it to capture the prompted entries already entered and re-use them after the change.
Revit :: Changing Title Block For A Sheet From One Family To Another?
Mar 13, 2012I have a Revit project with two different types of title blocks - one for Planning Board Submissions and one for Construction Documents. Is there a way of changing the title block family for a sheet from one family to another? I cannot seem to be able to do this without deleting the sheet and re-creating it with the new title block family.
I cannot just edit the family and reload it because, like I said, I need to maintain certain information on some sheets and different information on others.
AutoCAD Inventor :: Assign Sketch Symbols / Title Block To Defined Layer
Apr 1, 2013I have a need to send files saved from Inventor.dwg to AutoCAD.dwg to suppliers, however due to the quantity of files "size", I need to purge them in Autocad before I e-mail. The problem I have is that my template Inventor.dwg is 1 mg due to Sketch Symbols, plus added file size for the views etc. When I get to Autocad to purge them, my Sketch Symbols and Title Block is on the "0" Layer. I have to select everything that is on the "0" Layer and change the layer to a different layer to start a LISP routine that does a, Erase All, Purge All, to get my file size down. I have not found a way to change the layer that Sketch Symbols are created on or reside on by default or Title Block either.
Any way to do this Inside the Sketch Symbols, inside the Title Block, using the styles, anything?
I am just now going through a iLogic course and read that Layers can be hidden. Can iLogic be used to change the layer of "SketchSymbols" or "TitleBlocks" and or used to purge all Sketch Symbols during the SaveAs to Autocad.dwg process?
AutoCAD Inventor :: Title Block Drawing Number?
Jan 9, 2014I am trying put drawing numbers on my drawings. The drawing number is "019-02-00038-x" where "x" is the page number in the set of drawings. How do I set this up? Every time I try to change "x" it changes it for the entire set of drawings.
I'm working with Inventor 2014.
AutoCAD Inventor :: Add Sheet Name To Title Block Of Drawings With Variable?
Apr 15, 2009Is there a way to add the sheet name to the title block of drawings with a variable?
I can add the sheet number, revision and size but not the name. Why not?
AutoCAD Inventor :: Title Block Info From Excel Sheet
Dec 21, 2005I've created a custom title block. I'd like to use VB to fill in this title block using info obtained from an Excel Spreadsheet; Company Name, Location, Drawing Title, etc.
View 5 Replies View RelatedAutoCAD Inventor :: ILogic Error (changing Sheet Border And Title Blocks)
Jun 18, 2012I'm having an error with Ilogic parameters.I just wanna change the border and the title blocks with Ilogic. This should be simple. Isn't this?
View 2 Replies View RelatedAutoCAD Inventor :: Sheet / Border / Title Block Default Margins
Sep 28, 2011Is there a way to change the default margin offsets (i.e. the distance between the edge of your border or title block to the edge of your paper), without using the "Insert Drawing Border" option?
I would have thought you could do this through the "Edit Sheet" or "Define New Title Block / Border" options. I have multiple customized title blocks, which each require their own margin offsets.
AutoCAD Inventor :: Hole Table On Another Sheet And Fields In Title Block
Jul 14, 2013I moved the hole table from the original sheet to an other, but the fields in the title block of the new sheet don't update with the iproperties of the model
View 1 Replies View RelatedAutoCAD Inventor :: Scale In Title Block - No Prompted Entry / Keep Current Sheet Active
Apr 9, 2013 First, it requires there to be a prompted entry text box in the title block named <SCALE>, is there any way to write to a textbox that is not prompted entry? The prompt when a new drawing or sheet is created is misleading and makes users think they need to manually fill out the prompt. Secondly, this code works on multi-sheet drawings but it concludes by making the last sheet active. Since we are triggering this rule before save it's a nuisance to have the drawing switch sheets everytime you do a save. Ideally, the current active sheet should remain active when the rule runs. Here is the
For Each oSheet In ThisApplication.ActiveDocument.Sheets
ActiveSheet=ThisDrawing.Sheet(oSheet.Name)
If oSheet.TitleBlock Is Nothing Or oSheet.DrawingViews.count=0 Then Exit Sub
oTitleBlock=oSheet.TitleBlock
oTextBoxes=oTitleBlock.Definition.Sketch.TextBoxes
[code]....
AutoCad 2D :: Create Dynamic Block Made Up Of Circle With Letter Or Number Inside?
May 27, 2013I'm working with Autocad 2011. My objective is to create a dynamic block made up of a circle with a letter or number inside. Here's the tricky part. As I add additional letters or numbers the circle increases in diameter automatically to fully encircle whatever it is I type. The more letters or numbers the larger the circle and the fewer the letters or numbers the smaller the circle?
Or is there a lisp routine for this type of request?
AutoCad :: How To Add New Sheet With Title Block
May 4, 2012How to add a new sheet with my title block. I am a little confused on this so far. I have read the autodesk 5 parts to sheet set manger and there is allot of things I'm not sure of. The title block is the first
View 9 Replies View RelatedAutoCAD Inventor :: How To Convert Letter To Number In ILogic
Jun 27, 2012I am making a iPart with iLogic. I need a function to convert letter to number or convert number to letter as we did in VB for Excel.
For example: Char(65)="A"; CODE("A")=65, and so on.
AutoCad :: Edit A Title Block At Bottom Of Page
May 10, 2012I would like to know how I can edit my Title Block at the bottom of my page. I used to be able to select it in the past when opening the new template file. However after I performed drawings in the model window and back to the layout, I cannot click or edit the field anymore. I tried highlighting using my mouse, shifting layers and exploring right click commands but nothing good came up.
Refer to the attachment what I mean. I am running AutoCAD 2013 and I am on the "AutoCAD Classic" theme.
I tried doing a search online and on the forum with keywords such as "edit title", "edit name" but nothing relevant came up.
Capture.jpg
AutoCAD 2010 :: Sheet Title Block Template
Apr 23, 2012I already build sheet system ,and I found when I revise title block template,my sheet not update automatic,I must create new sheet,and double-click it to open it, then you can see update,who know why?
View 3 Replies View RelatedAutoCAD Civil 3D :: SYNC Title Block To Sheet Set Manager?
Aug 15, 2013I'm not up to speed in configuring title blocks with sheet set manager and I've come into this situation unexpectedly.
I had to come up with a set of P&P sheets in a hurry to assist a contractor in providing a rough estimate for a sewer run, so I generated the sheets using the preconfigured imperial sheet set template. Afterwards I've switched out the border and title block generated by the template with our standard blocks. Our block attributes are old school and do not use fields. Now I am trying to upgrade those old attributes by replacing them with fields that reference the Sheet Set attributes.
Here is the problem: when inserting the field for the sheet number I can either use the CurrentSheetNumber or the SheetSetPlaceholder attribute. If I use CurrentSheetNumber, the title block shows the correct sheet number for the current sheet (the sheet I am making the edits from). However all the other sheets show that same number. In other words the fields do not show the corresponding sheet numbers from SSM. If I use SheetSetPlaceholder none of the title blocks will update to show the sheet number.
I believe I should be using the placeholder field but I can't get it to synchronize it with the SSM. Is there a way to make this work?
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
[URL]
AutoCad :: Changing Company Name In Title Block
Jul 26, 2012Been working with Auto Cad for a while, but using the same tittle block that was created by someone else.
The tittle block seems to be made up of some text lines (which is the area I want to modify), but tied to several 'attributes' below the text, project, drawing number etc.
The only way I can access the text is to 'explode' the whole area (block?), I can then modify the text, but in doing so the several attributes function individually, and not as a whole block.
How do I 'un-explode' the area?
AutoCAD Architecture :: Project Fields In Title Block Sheet Template
Jun 26, 2012I've created a sheet template that includes Fields to populate the sheet with the Project Name and location among others like scale, etc. When I create the new sheet in the project navigator most of the fields populate with the correct information based on the parameters set in the project. However, it consistantly does not populate the Project name and location. When I click the field and ensure that the attribute is set correctly then it renders the correct information. The problem is this ends up being a manual operation yet it still reads as a smart tag. Why do these not populate automatically?
Here's my process:
Create dwt for sheet file and include xref of title block.
Create a block with attributes that link to AEC Project, CurrentSheetTitle, etc. and insert into dwt.
In project navigator I create new sheet and select my template.
Information does not populate.
But when I view the block and close (no edits) it then links.
Photoshop Elements :: Different Blocks Of Text And Colors Changing From Letter To Letter Within Words
Jun 26, 2013I have a project with many different blocks of text, and colors changing from letter to letter within words.
How do I identify what any given color is?
When I click on a letter, it shows me a visual block of the color, but doesn't tell me what the corresponding color number is.
Problem being, if I see one letter and want to take its color to use it elsewhere, I have no way of knowing what that color is.
CorelDRAW X6 :: Moving Pages / Changing Page Number
May 1, 2013Is there any way different than drag and drop for moving pages in multiple pages designs. I have some presentation designs lately and have to change pages numbers or move multiple pages.
Drag and drop is not user friendly on 30-50 pages documents.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
AutoCAD Civil 3D :: Generate Station Ranges For Each Sheet Title Block When Generating Sheets?
Apr 4, 2012Is there a way to generate the station ranges for each sheet title block when generating sheets? It seems like there should be some sheet set manager variable for it or something but I haven't been able to find it.
View 8 Replies View RelatedRevit :: Locking / Pinning Title Block And Sheet
Aug 29, 2012I want to pin all our sheets in the lower left corner. We are using a parametric sheet with all the sheet sizes we need built in. The title block is placed in the lower right corner. Is there a way to keep the lower left corner in place (pin) and the tiltle block moving when changing sheet size?
View 3 Replies View RelatedAutoCAD Inventor :: Get Title Of Saved Document Out Of Drawing Number Section
Jun 6, 2012When i make a drawing in inventor, in the Title Block, it says the title of the saved document in the Drawing No. section. So what i am saying is how do i get the title of the saved document out of the drawing number section and either delete it or get it in the Title section.
View 2 Replies View RelatedAutoCAD Inventor :: Automatic Page Number In IDW?
Jul 17, 2012i would like to have a page number in idw automatically ad when i added a page it will indicate "page 2", is it possible?
at the moment , i manually type a text annotation for page # for each page.
inventor 2011
vault 2012
AutoCAD Inventor :: Idw Starting Sheet Number
Nov 5, 2012When using multiple sheets within an IDW. Can the first sheet start out with a number other than 1, in otherwords start with sheet number 31, then every sheet after that be indexed by 1, ie 32, 33, 34 etc.
View 1 Replies View RelatedAutoCAD Inventor :: Sheet Name As Part Number
Sep 18, 2013I want to use the part number propertie to change the sheet name in the .idw
So when i insert a new sheet and place a part the part number wil be placed in the title block and i want to change the sheet name to that part number.
AutoCAD Inventor :: Sketched Symbol With Sheet Number
Jun 17, 2013On a multi page drawing, I want a sketched symbol to placed on a upper right hand side, “For BOM, see Sheet: X” to be placed on every sheet except the sheet where the parts list available on the drawings. Also the Sketched symbol prompted entry automatically filled up with the sheet number (Parts list page).
View 6 Replies View RelatedAutoCAD Inventor :: Select Drawing Sheet By Number
May 14, 2013What is the code to select a drawing sheet by either its number or description but NOT both together?
Sometimes want need to select the first sheet by number 1 but the sheet description can change. and Sometimes we will need to select the sheet by its description but the sheet number may vary.
AutoCAD Inventor :: Associate Leader Text With Sheet Number
Apr 24, 2013Is it possible to associate leader text with a particular page number.
For instance, I want to write, "see page 6"
But if I add a page before 6 then I have to remember to update the note. Is there a way to live link this in the leader?