Did something change in 2013 as far as the way surfaces are displayed in an idw? the surfaces always always had to be "included" in a idw view. now they come in as regular geometry.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
When creating new surfaces, the default visibility is translucent and color is black. I'd like to customize the default surface feature settings to appear as opaque and grey. Can this be changed in Application Options, or Document Settings, or perhaps the registry?
View 4 Replies View RelatedIn Revit LT 2014, I've tried unsuccessfully to override the color of topographic surface edges in my model to white, so the edges don't show up in plan views. I've tried through the Object Styles menu, Override Graphics In View By Element, and Override Objects In View By Category, but nothing has worked. These overrides have worked for me in the past in previous Revit Arch versions, so I don't know if LT just doesn't have that capability, or it's a bug.
I can't simply extend the topo surface past the view window edges (I only want to show contour lines on my site, since they've been surveyed, but the neighboring site has not been surveyed, so I don't want to guess at them). I really just want to hide the toposuface boundary edge.
how I can add more volume to curved object surface? Say for example I have a plastic cup.You can think of this as cylinder object ,which was the shelled out using the shell tool and then had its base sealed.
Now at certain parts, I would like to increase the thickness and then blend it the rest of the surface(may be chamfer its edges) .
At certain parts on curved surface I would like to add an extra mm, I think if the surface was flat I would just sketch the shape, then extrude it by few mm and smooth the edges by doing a chamfer
But how can this be done on surface that is curved? Or multi curved for edges?
I'm designing a press for a skateboard similar to: Rib Press
I have the board modeled: (see attached)
Now what i want to do is generate those ribs as seen in the picture.
I tried creating a block that intersected with the board and tried to split the rib at the surface, but to no avail. I think the issue has something to do with the curve of the board in two directions, but i can't seem to get it right.
if you are having trouble visualizing what i'm asking about, look at this. I want to be able to figure out the exact shape of those center ribs to print and eventually cut out of wood.
It is not possible forme to add the fil because it is to large 1.8MB how can I poste then I like to know if it is possible to extend the button flat surface diameter ø12.5 up to the shaped surface. The result should be a total solid block whit a surface shaped hole.
File last up-date with Autodesk Inventor Professional 2013
I am a beginner when a extrude a feature and select a part surface for new sketch now i want is to offset that surface but i can,t there is + sign with mouse icon and something like fully constrained is written in down the window.
View 9 Replies View RelatedI am trying to merge the gaps left from extruding a flat surface off a circular surface, delete face and heal does not appear to work.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
We received a surface model from a vendor that I have patched up as best I can, it still has one hole that I can find that I haven't been able to fill. Ideally we would like to have a solid model, but I'm running out of time to get this done and the surface model we have would be good enough for our purposes IF I can get the yellow surface tangent lines to turn off or change their color to black.
I've attached a jpg of the surface model with the yellow lines and uploaded the model here: [URL].....
While making a drawing and there is something which I want to turn visibilty of for a while, I will select from a sub-menu "Visibility" (see the attachment) But what I must do if I want to turn the visibility on again for example to that hole shown in screen shot?
View 2 Replies View RelatedThe client I have has 1 seat of factory Ultimate and 8 seats of factory premium.
The issue is the premium seats have an issue when you turn the visibility off on a part in the IPN you cannot turn it back on. This is on all the seats of the premium. There is no issue with Ultimate.
The service pack did not fix the issue. Now I know Autodesk there will never be a fix for this unless I up-grade seems to be the Autodesk way in the past 3 years.
For some of my asemblies I have had to turn visibility off in some parts.
How do I turn it back on?
I want to turn off visibility of certain parts in an overlay view but when I right click on the parts or the view(s) the visibility is greyed out. Why does this happen and how can I correct it?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I have 2 problems:
1. created a turbine whose blades are made from some planes that I applied thicken offset command. I applied circular pattern to multiply the blade around center point but i get too many planes and i must to make invisible each one. How can i make invisible all planes in the same time.
2. After i make them invisibile i exit from that part but when i start that part again or when i place it in an assembly all planes are visible. What should i do to make them invisible for ever.
The attached part has multiple holes in multiple locations...... I want to show in the .idw one set "row" around the circumference at a time.
So I want to show set one, how far in from the end of the tube, then how many and at what degrees around the 360*. to do this i can only suppress the other features right now.
so when I make another View those same parts are suppressed and i cant change it around otherwise it messes with the holes I want and don't want to show in the previous view.
I sometimes edit parts in assemblies. When I turn sketch visibility on or off it does not stay the way I left it. I should be able to edit a part in part view or assembly and the view setting off or on should be how it was last saved. If I saved an ipt with the vision it should be on in any & all assemblies it lives in but its not. I have noticed the difference in new version 2012 - 2011 was no problem.
View 1 Replies View RelatedUsing Inventor 2013. In an IDW, I have toddled off visibility of lines in a view. I would like to regain visibility of these lines. HOW?
View 2 Replies View RelatedSee attached screenshot.
Somehow my top level assembly shows the UCS triads for hundreads of my parts (but not all of them). I know I didn't turn the visibility of all these UCS triads on manually. Now I cannot get them to turn off.
When I toggle the visibility status of a few and save the file they come back when the file is reopened.
Note, they are NOT visibile in their respective part files, just in my top level assembly.
How to manage the visibity of parts on a particular view? For example, in a view there 10 parts appeared. I would like to make only selected parts visible on the said view.
I have the manual steps on how to hide them but when I try to code it using the said step, the parts on the model file were hidden not in the view.
I use oView.ReferenceDocumentDescriptor.ReferenceDocument in traversing the parts but this refers to the model file.
Here is my
Set ViewDocument = oView.ReferencedDocumentDescriptor.ReferencedDocument
For Each ViewOccurence In ViewDocument.ComponentDefinition.Occurrences
If Not nozzleName = ViewOccurence.ReferencedDocumentDescriptor.DisplayName Then
ViewOccurence.Visible = False
End If
Next
How to manage the visibility of components in a particular view?
In attach file,View 2 is a detail view of view 1. On view 2, I want to display only the nozzle (Drain (H):1) and shell (C1306388341:1) component. So I need to set the visibility of the other component to false.When I try to code this, the components of model file of view 1 was updated not the view.
Set ViewDocument = oDetailView.ReferencedDocumentDescriptor.ReferencedDocument
For Each ViewOccurence In ViewDocument.ComponentDefinition.Occurrences
If nozzleName <> ViewOccurence.ReferencedDocumentDescriptor.DisplayName Then
ViewOccurence.Visible = False
End If
Next
The reference document I set for my code is not the document which contains the view 2. So I need to the actual reference document where view 2 belongs which is in the box of view 2 that contains 5 components.
Is it possible to make a document invisible after it´s open? I would like to keep it in memory but not reachable to the user.
Making the document view(s) invisible is not what I´m looking for. I need to clear/close/delete all views WITHOUT closing the document..
( So it has the same state as if opened through API with the visible parameter set to false, e.g. Document.VIews.Count = 0
I am trying to control the layer visibility on different sheets of the same drawing but have not quite figured it out yet.
We add a DXF sheet to drawings with flat pattern views to export to DXF for our laser. I wrote a VBA macro that adds the sheet, copies the flat pattern view and removes the dimensions to clean it up before creating the DXF. I am having a problem turning off the visibility of the bend lines on JUST the DXF sheet. I can turn bend lines and hidden lines off with this:
'Turn off bend lines and hidden linesFor Each oView In oSheet.DrawingViews 'Set the layers collection Set oLayers = oDrawingDoc.StylesManager.Layers 'Turn off all bend lines and hidden lines For Each oLayer In oLayers If Not InStr(oLayer.Name, "Bend Centerline") = 0 Or Not InStr(oLayer.Name, "Hidden") = 0 Then oLayer.Visible = False Else End If Next Next
but it turns them off on all sheets. I want to only turn them off on the DXF sheet. How would this be done?
Inventor Professional 2014 64 Bit
Windows 7 Professional
NVIDIA Quadro FX 4600
Dual Intel Xeon E5540 CPUs
16GB DDR3 Ram
I have a sketch that has visibility on. In 2013 I can't find the turn visibility off.
View 3 Replies View RelatedI have a code generated a rendered view on my idw. My dimension lands on a specific location in my view that makes the dimension difficult to see due to the rendering colors... Is there anyway to have a dimension have a white box behind it to obscure some of the rendering to make the dimension value more visible?
View 2 Replies View Relatedwhen in assembly mode when i right click on a part workplane there is sometimes the Visibilty option and other times there is no Visibility option ?
View 3 Replies View RelatedI am working on an assembly and idw, and my assembly has a number of reference parts in it. Two patterns of reference parts are not appearing in the idw for some reason.
I can get them to appear by changing the view style to show hidden lines, and then the hidden lines appear and solid lines for all except the first instances also appear. When i turn off hidden lines, the hidden lines disappear leaving the solid lines of all but the first instances. Then if i change the reference data line style to try and show all the lines, they all now disappear again.
I am currently having trouble viewing welds on drawing views. The outer line of the weld is visible but there is no fill or hatching. I have tried to edit visibility settings, etc and nothing works. Also note that other welds show up and that all the physical welds do show up on the assembly models.
View 9 Replies View RelatedI'd like to set up a keyboard shortcut so that when I press the 'V' key, inventor toggles the visibility of the selected part or assembly. However, "Visibility" seems to be about the only command that doesn't exist in the list of keyboard shortcuts*. I found this post in which someone says it's not possible, but might be using VBA. I've done some iLogic but know nothing about Inventor's inner-working VBA. I'm wondering if there's some workaround, VBA or otherwise, that'll allow me to toggle visibility using the 'V' key.
*actually it does but it says it's only available for use in Inventor Studio. Go figure.
Using: Autodesk Inventor 2013 Product Design Suite
Just thought I would post this since I didn't see it anywhere else. With Inventor 2009, the views in IDW are automatically set to associative which causes the visibility option for parts/assemblies to be grayed out.
View 3 Replies View RelatedI use INV2012. It was very easy in the older version of INV to switch off all unwanted items in drafting. But, now we have to work with design view rep. Currently, I am working on a drawing which has surfaces. Though I saved the view rep without those surfaces, still I am getting it in drafting. I have unchecked assosiative in drawing view rep still no use.
View 1 Replies View RelatedOk we just got 2012 and now i cant view that weld surface look, where instead of just a chamfer if actually looks like a weld. the setting was automatically on in 2012 but in 2013 it isnt.
how do you turn it on?
