AutoCAD Inventor :: IPN Part Visibility
Jul 27, 2012
The client I have has 1 seat of factory Ultimate and 8 seats of factory premium.
The issue is the premium seats have an issue when you turn the visibility off on a part in the IPN you cannot turn it back on. This is on all the seats of the premium. There is no issue with Ultimate.
The service pack did not fix the issue. Now I know Autodesk there will never be a fix for this unless I up-grade seems to be the Autodesk way in the past 3 years.
View 2 Replies
ADVERTISEMENT
Jun 25, 2013
I am working on an assembly and idw, and my assembly has a number of reference parts in it. Two patterns of reference parts are not appearing in the idw for some reason.
I can get them to appear by changing the view style to show hidden lines, and then the hidden lines appear and solid lines for all except the first instances also appear. When i turn off hidden lines, the hidden lines disappear leaving the solid lines of all but the first instances. Then if i change the reference data line style to try and show all the lines, they all now disappear again.
View 4 Replies
View Related
Jun 12, 2012
I have a simple Assembly for a Frame that I made with Frame Generator. I'd like to use a rule to toggle the visible of some of the framing members.
In the sub assembly (called Frame0001:1) I created a rule:
(I have a variable called LeftAngle, and the bar I want to toggle is called Bar1.)
If LeftAngle = 90 then
Component.Visible("Bar1") = False
Else
Component.Visible("Bar1") = True
End If
I am sure this is VERY basic, but I can't get it to do anything. There is no error message - just nothing happens.
I know the rule is running though - it will change other parameters in response to the If Then statement.
View 6 Replies
View Related
Aug 9, 2011
I am having an issue with the visibility of components underneath other, transparent components. The part which needs to be visible is a switch underneath a vacuum formed polycarbonate cover. When the cover is positioned open such that the switch would be partly visible even if the cover is opaque, the switch is rendered. When the cover is positioned closed, the switch is no longer rendered. I have attached JPG's of the two states.
I am on INV PDSU 2012 64 bit.
View 9 Replies
View Related
May 19, 2013
I have been trying to sequentially show (and then hide) the dimensions for each feature (together with its related sketch dimensions) in a part browser tree.
I can set the visibility for any one of the sketches with e.g.
oSketches.Item(1).Visible = True
oSketches.Item(1).DimensionsVisible = True 'Show sketch dimension
and show the visibilty of the feature dims with e.g.
Set oFeature = odef.Features.Item(1)
oFeature.FeatureDimensions.Show 'Show feature dimension
but I cannot work out how to test which feature a particular sketch is dependent upon. Until I do this the visibiliy
of the feature and sketch dimensions cannot be synchronised.
I expected something like
If odef.Features.Item(1) = oSketch.Parent might work or maybe the Isownedby function but so far I have had no luck with anything I have tried.
View 2 Replies
View Related
Dec 11, 2013
how to turn off the visibility of a specific sketch (ex. base_Sketch) of a certain part in assembly using vba?
View 3 Replies
View Related
Jan 6, 2012
I am patterning a sub-assembly which has a reference part that is not visible in the sub-assembly. I'm driving this sub-assembly with a quantity parameter and when addition instances are created, the hidden part turns visible. I can bring the sub-assembly in multiple times and the parts remains non-visible, however, once I pattern it, the part shows up in all instances except for the original.
View 1 Replies
View Related
Oct 10, 2013
I'm creating an exploded view presentation of a large assembly. I understand that when sequences are created, the parts that are hidden at the time are added to the Hidden folder of that sequence. But since I had to work back and forth between sequences to tweak the order, I want to hide some parts that I just added and that belong to a previous sequence. The part is now randomnly hanging in space when the camera angle is trying to show another part of the assembly. How can I make parts hidden for some sequences but not other? There's no option to hide parts, only to unhide them from the Hidden folder. BTW, using Inventor Pro 2012.
Look at picture to better understand the question.
View 2 Replies
View Related
Aug 16, 2011
I want to be able to hide a part of an assembly in one projected view of the 2d drawing but not all, however when I do so the hidden lines stay hidden lines. They do not change. I know you can change the hidden line properties to make them continuous lines but is there a setting that will allow these lines to change automatically?
View 9 Replies
View Related
Nov 7, 2013
Mirroring a part or assembly in 2014 makes the derived part with all sketches visibility on, nevertheless the original sketches visibility is off.
[URL]....
It makes me sick switching them down.
Is it treatable?
View 9 Replies
View Related
Oct 1, 2007
I'm struggling to hide a piece of such a block (using Visibility Parameter).
View 2 Replies
View Related
Jul 12, 2013
is it possible to use look up tables to get different segments of a part without making a visibility state list that is a mile long. Kind of like a block works (with the flyouts) but using all images and no dimension parameters.
View 1 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
May 4, 2012
convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Aug 29, 2012
In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
View 6 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
Apr 11, 2013
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
View 9 Replies
View Related
Apr 1, 2013
I have created the part based on piece of standard angle taken from library. Now I want to make a mirrored copy of this part by Component-Mirror.
Inventor does not let me do it with standard part.
The question is: How I can transform a standard part to normal one, I mean I could get rid of belonging to standard part? Making a copy does not work. The only way is to derive and mirror this part but I wish there could be easy way.
View 9 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 19, 2012
Is it possible, if you have a merged BOM.row to get the total quantity of each part?
inventor professional 2011 / 2012 / 2013
View 4 Replies
View Related