AutoCAD Inventor :: Changing Part Type From Normal To Purchased Part Like Bearings / Bolts?
Apr 11, 2013
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
View 9 Replies
ADVERTISEMENT
Oct 1, 2005
I'm having trouble changing a reference part back to normal. It's in a sub nested 2 levels. I earlier had it as a phantom but changed it easily to reference. Now I need it to be normal.
I've tried going into each level to change it. I cannot access it unless I change the BOM to read "Model Structure" since reference parts don't show up under BOM structure. When I click on Reference (it has a little X in it) it will seem like it's going to change but turns back to ref every time.
I went into the lowest sub & was able to change the part to Default through Properties but it just goes to reference again in the main assembly.
View 7 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Feb 27, 2012
I have several frames built by Frame Generator in project.
Than one frame has been diminished much while design so I use just several frame links just like parts without skeleton.
Those frame links I have renamed since I have several copies and I would like to have unique name. Now when I start the assembly consisting those links Inventor naturally inquires about missing files.
I show to renamed one and everything works ok except when I start the file again it asks again nevertheless file has been saved. Inventor still remember this frame link names as it used to be in browser and does not accept replacement.
[URL]........
I wish I must not rebuild those parts from scratch again. Therefore I have two questions
Is it possible to save this frame part as normal part (save as does not do it) ?
Is there some other way to get rid of Frame Generator status of some part built by Frame Gen?
View 1 Replies
View Related
May 14, 2013
I have a part that was made from content center and modified further. I would like Inventor to no longer recognize this part as a content center part. It has been renamed and migrated to 2013 format, but still when inserting into an assembly the assembly recognizes it as a content center part in the browser.
Also, the browser title for the part will not update with the file name.
View 5 Replies
View Related
Oct 31, 2011
I created a part, then created an assembly and put the part in the assy. Now I have changed the name of the part but it still shows up as the origional name in the assy. How do I get the name in the assy to match the part?
View 9 Replies
View Related
Sep 8, 2011
How can I change transparency of a part within itself or within an assembly? (I.E. leave its original color as is, but changing/"tweaking" its transparency).
View 9 Replies
View Related
Oct 19, 2012
How to change the part that has the pushpin icon on it? i need to change the static part in my assembly.
View 2 Replies
View Related
Apr 5, 2012
After Part is inserted into an assembly and after the Part is changed ( say the length from 16.25 to 17.75), How do I auto change the "Part Number" to match this new length in the parts list?
View 6 Replies
View Related
Aug 8, 2012
Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
View 5 Replies
View Related
Mar 27, 2012
I have often right clicked a part in the browser of an assembly and edited its properties. This may include stock number, material and adaptability.
Drawings of these assemblies seem to update accordingly. At least initially.
I have noticed often several sessions later, the same properties have defaulted to their original value.
And I came across the statement in the corrections attachment.
What does the highlighted sentence mean, exactly? And which properties respond to a change at the part level when edited in an assembly?
Using Inventor 2012 Windows 7 Dell Precision dual EH(quad core) @ 2.13 GHz 4 G Ram
View 3 Replies
View Related
Jan 26, 2011
Is it possible to change the derived part link to another part like you would replace a component in an assembly? My issue is that i created a part and used a derived part within. Well this part number changed and it just so happens that the derived part needs to change as well. I tried the design assistant, and changed the link there but it didnt seem to want to take. I tried renaming the derived part, and opening the file...i get the error but i still am unable to change the link that way either.
Autodesk Inventor 2011
View 9 Replies
View Related
Jan 11, 2013
I need to change my parts list style for all of my drawings from this point forward. For the life of me I can't figure out how to do this. I have my project set to read-write and I've tried this 10 ways til Sunday but it won't take. There are several things that I want to achieve but I'd be happy with just one of them for now. All I want to do is remove the ITEM column from my default parts list. After this I want to merge rows by part number, etc.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 9 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
May 4, 2012
convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies
View Related
Feb 14, 2012
As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies
View Related
Aug 29, 2012
In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
View 6 Replies
View Related
Oct 23, 2013
I order not to hide components, i want to make a break sketch and remove a piece from a part from an assembly in the isometric view in a drawing. can i do that?
View 4 Replies
View Related
Sep 11, 2013
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
View 1 Replies
View Related
Mar 11, 2013
I'm modeling a temperature gauge and would like to have glass over the gauge so the inside is visible. I can easily do this with an assembly, but I'm wanting to do this with a single part. I tried to derive a new part from the assembly, but the transparent part turns solid so nothing inside is visible. Is it possible to do this?
I've include pictures of what I want and what I end up with.
Inventor Professional 2013
Intel Xeon W3680 @ 3.33Ghz
12GB DDR3 RAM
NVIDIA Quadro 2000 GPU
Windows 7 Professinal 64-bit
View 9 Replies
View Related
Sep 21, 2011
I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Nov 6, 2013
Whenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies
View Related
Jun 12, 2013
Is there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies
View Related
Aug 28, 2011
The default Insertion Point of a part list is its" range box.maxpoint",but I need to make its "rangebox.minpoint" as its InsertionPoint . My code to insert the part list is as follows :
I have tried using the code " oPartsList.RangeBox.MinPoint.InsertionPoint = True" , imitating "oSketchLines(1).EndSketchPoint.InsertionPoint = True" ,but without luck .
View 1 Replies
View Related
