AutoCAD Inventor :: Changing The Pinned Part
Oct 19, 2012How to change the part that has the pushpin icon on it? i need to change the static part in my assembly.
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: Changing Part Type From Normal To Purchased Part Like Bearings / Bolts?
Apr 11, 2013Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
AutoCAD Inventor :: Changing A Part Name?
Oct 31, 2011I created a part, then created an assembly and put the part in the assy. Now I have changed the name of the part but it still shows up as the origional name in the assy. How do I get the name in the assy to match the part?
View 9 Replies View RelatedAutoCAD Inventor :: Changing Transparency Of A Part
Sep 8, 2011How can I change transparency of a part within itself or within an assembly? (I.E. leave its original color as is, but changing/"tweaking" its transparency).
View 9 Replies View RelatedAutoCAD Inventor :: Changing Reference Part To Normal In BOM
Oct 1, 2005I'm having trouble changing a reference part back to normal. It's in a sub nested 2 levels. I earlier had it as a phantom but changed it easily to reference. Now I need it to be normal.
I've tried going into each level to change it. I cannot access it unless I change the BOM to read "Model Structure" since reference parts don't show up under BOM structure. When I click on Reference (it has a little X in it) it will seem like it's going to change but turns back to ref every time.
I went into the lowest sub & was able to change the part to Default through Properties but it just goes to reference again in the main assembly.
AutoCAD Inventor :: Auto Changing Size Of A Part?
Apr 5, 2012After Part is inserted into an assembly and after the Part is changed ( say the length from 16.25 to 17.75), How do I auto change the "Part Number" to match this new length in the parts list?
View 6 Replies View RelatedAutoCAD Inventor :: Changing Part File In Drawing?
Aug 8, 2012Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
AutoCAD Inventor :: Changing Part Properties In Assembly?
Mar 27, 2012I have often right clicked a part in the browser of an assembly and edited its properties. This may include stock number, material and adaptability.
Drawings of these assemblies seem to update accordingly. At least initially.
I have noticed often several sessions later, the same properties have defaulted to their original value.
And I came across the statement in the corrections attachment.
What does the highlighted sentence mean, exactly? And which properties respond to a change at the part level when edited in an assembly?
Using Inventor 2012 Windows 7 Dell Precision dual EH(quad core) @ 2.13 GHz 4 G Ram
AutoCAD Inventor :: Changing Derived Part Link
Jan 26, 2011Is it possible to change the derived part link to another part like you would replace a component in an assembly? My issue is that i created a part and used a derived part within. Well this part number changed and it just so happens that the derived part needs to change as well. I tried the design assistant, and changed the link there but it didnt seem to want to take. I tried renaming the derived part, and opening the file...i get the error but i still am unable to change the link that way either.
Autodesk Inventor 2011
AutoCAD Inventor :: Changing Part List Style?
Jan 11, 2013I need to change my parts list style for all of my drawings from this point forward. For the life of me I can't figure out how to do this. I have my project set to read-write and I've tried this 10 ways til Sunday but it won't take. There are several things that I want to achieve but I'd be happy with just one of them for now. All I want to do is remove the ITEM column from my default parts list. After this I want to merge rows by part number, etc.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Changing Part Master View In Drawing
Sep 21, 2011I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
AutoCAD Inventor :: Changing Default Imported Part Appearance
Nov 6, 2013Whenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies View RelatedAutoCAD Inventor :: Changing Part Parameters From Assembly / ILogic
Jun 12, 2013Is there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedAutoCAD Inventor :: Changing Insertion Point Of Part List
Aug 28, 2011The default Insertion Point of a part list is its" range box.maxpoint",but I need to make its "rangebox.minpoint" as its InsertionPoint . My code to insert the part list is as follows :
I have tried using the code " oPartsList.RangeBox.MinPoint.InsertionPoint = True" , imitating "oSketchLines(1).EndSketchPoint.InsertionPoint = True" ,but without luck .
AutoCAD Inventor :: Changing Template Files In Existing Part File?
Sep 1, 2011We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
AutoCAD Inventor :: Changing Base Component Reference Of Derived Part
May 25, 2012Is there and easy way to change the base component of a derived part?
The way I use to do it, is to rename the base component. Then open the derived part, and point to the new base component after the "error message".
In the idw environment there is a "Replace Model Reference"" which does it for 2D drawings.
btw. I use Inventor 2013.
AutoCAD Inventor :: Content Center Part When Changing Size Doesn't Update Correct Length
Mar 15, 2013A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
Photoshop :: Why Do New Windows Always Open Up Pinned To The Top Left Portion Of Screen
Nov 12, 2013I have disable the application frame in Photoshop CC and now all new windows open up in the top left corner of my screen BEHIND all of the brush and tool setting windows. How can I change this?
View 3 Replies View RelatedAutoCAD 2010 :: Changing Part Descriptions Using Excel
Mar 30, 2012I have a set of part descriptions that need to be changed. Each part description corresponds to a part number. See the example below of what it would look like in AutoCAD.
123 screw
265 bolt
847 washer
But this list can get really long. Each part number and each description is a seperate text string or mtext string. I plan on having an excel spreadsheet that has a list of all part numbers that my company uses with their corresponding descriptions.
I would like to use the part number to find the appropriate description and then change the description. Hopefully this can be done automatically for a list of part numbers and their descriptions.
AutoCAD Inventor :: Changing Extrusion By Changing Sketch Results In Errors
May 9, 2013The attached files are two sprockets. The original part has 30 teeth. I need 34 teeth.
The MODIFIED part has one of my attempts at making 34 teeth. I have tried the following with the same error dialog box (see below):
1. Edit Sketch_6 (associated with Extrusion1) by deleting all but one of the teeth lines (2 arcs and 2 lines that make up a tooth) and making a circular pattern of 34.
2. Same circular pattern, except this time I "Close the Loop" (right-click on one of the teeth line segments > Close Loop > click on all the segments until the loop is closed).
3. Same circular pattern, except this time change the resulting patterned lines into construction lines, trace these lines with arcs and lines of my own (not construction lines), and close the loop on my own lines.
When each of the 3 attempts failed, I tried deleting Extrusion1 and making a new Extrusion feature from Sketch_6. I cannot select what I want in Sketch_6 in order to make the teeth.
I'm at the point where I'm just going to take the dimensions from the circular pattern sketch of 34 teeth, delete Extrusion1 and Sketch_6, and make my own sketch and extrusion.
For the future, I really would like to know - why is it so difficult to alter features like this? Yes, I understand that Sketch_6 is not fully constrained, and on top of this I am not privy to how it was generated in the first place (this is a part file from a vendor). But it does not strike me as something overly complicated for the Extrusion feature to recognize a change in its associated sketch. This is not the first time I have encountered something like this.
AutoCAD Inventor :: Unable To Derive A Part Containing Only A Block Into A Sheet Metal Part
Nov 15, 2011 I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
AutoCAD Inventor :: Part Inserted In Assembly File As Tube And Pipe Run Part?
Mar 28, 2012Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedAutoCAD Inventor :: Make As Sheet Metal Part And Have Option To Flatten Part?
Dec 28, 2012The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies View RelatedAutoCAD Inventor :: ILogic Rule For Each Part In Assembly To Change Part Parameter
Apr 1, 2013I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
AutoCAD Inventor :: Simplified Part - Assembly Won't Merge Into One Seamless Part
Dec 11, 2013I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
AutoCAD Inventor :: Part Created In Assembly Does Not Update To Part File
Nov 15, 2013New user 2014
Part created in assembly does not update to part file.
AutoCAD Inventor :: Can Part Make Alterations To Other Part When Inserting In Assembly
Mar 29, 2012I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
AutoCAD Inventor :: Find Mass Of A Part At Its Part And Assembly Level
Jul 1, 2013I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies View RelatedAutoCAD Inventor :: Converting Solid Part To Sheet Metal Part?
May 4, 2012convert the part that I have drawn to sheet metal. I have tried to make the part from sheet metal and it did not work out at all. I have attached both versions of the part.
View 1 Replies View RelatedAutoCAD Inventor :: 2012 Crashes When Opening Part Or Making New Part?
Feb 14, 2012As soon as I open a piece or try to make a new piece, it crashes! I can open the program but can't use it! I installed it and activated it and I can't use the program at all. I have sent many error reports beacuse I have opened it many times and had it crash many times and have always given my email address. Attached is the Error Report Details screen shot.
View 3 Replies View RelatedAutoCAD Inventor :: Convert Standard Part To Sheet Metal Part
Aug 29, 2012In previous releases (2009 i think) when i converted a standard part to a sheet metal part i could recall all the sheet metal styles by linking back to the sheet metal template (i can't remember exactly how this was done, but it was possible with one operation)
In 2011 i canot find a quick way of doing this, it looks like i have to open the sheet metal template and export each different style (about 40 of them) and then import each one into the converted part. am i missing something? is there a simpler way similar to how it used to be done? Why have Autodesk made this more difficult?
As it stands at the moment it would be quicker for me to remodel the parts from scratch using the sheet metal template. I know this is the obvious solution, but seems strange to change something that worked well to something that doesn't!
