Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
I've got a view of a presentation in a drawing and one of the parts which is in a sub assembly.
I've checked the visibility in the presentation and the drawing and the assembly but all say visible.
Restarted the computer, but still no change.
see below a pic of the drawing, I've drawn in a red rectangle where the part should roughly be.
IV 11
I wondered if there is a way of changing view reference from one object to another.
Example.
I have two similar models but drawing done for one.
I could save it as with a different name and replace in all the views referenciing from old model to new one.
Possible?
I am attempting to change the thread format in inventor under the dimensions style editor, but it is grayed out and does not let me select anything from the drop down box. I want to display the thread information so it includes the unit. For example, this is what it shows now: 1/2 - 14 NPT. I want to change it to 1/2" - 14 NPT. What I need to do to be able to change the thread format in the dimension style editor?
By the way, I have a lot of drawings to do, so manually typing in 1/2" - 14 NPT will take sometime, so I am looking for a quick and easy fix.
I sometimes create parts that are very similar to one another. (ie. - complex plate, but one part uses threaded holes, while an identical one has through holes, with all holes in the same location). So before now I would have built one part, made my drawing file. Then Copy/paste the part file into the same assembly folder, edit the hole feature of the newly copied part, then have to create an entirely new drawing file for the new copied part.
Is there a way to just copy my already created part drawing, and then just change the part file it used? They are basically the same part, but one uses threaded holes, the other uses through holes. My current way seems redundant and time wasting.
How to show, if it's possible, a feature of a part file as dashed in a drawing?
View 2 Replies View RelatedHow to get postion of faces of part when place on idw drawing file???
Do we need to use (ThisApplication.MeasureTools.GetMinimumDistance(oTG.CreatePoint2d(0, 0), oFa.PointOnFace)?
If we use that we will get distance but how to get face postion on idw. do we need to use edges?? or lines?
I have a part file that contain 7 separate solid. But in the drawing i want to show only 4 solids.
For this reason i put invisible command to other 3 solids in the part file . but in the drawing, i still see all the seven parts.
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
View 2 Replies View RelatedAt my company we use part numbers as file names for everything. for example, part number 09090P00100000, will be saved as 09090P00100000.ipt and will have a drawing saved as 09090P00100000.idw.
Within the drawing template file, i want to set up an ilogic rule that will check that the part present in the drawing corresponds to the file name of the drawing. This rule will run after saving and will just display a warning if the file names do not correspond.
I just need some code that will get the file name of the part displayed in the drawing. Note that we use iparts so the code must get the member file name and not the factory file name.
Dim oDrawingDoc As DrawingDocument
oDrawingDoc = ThisApplication.ActiveDocument
Dim oSheet As Sheet
oSheet = oDrawingDoc.ActiveSheet
[Code] ........
Autodesk Inventor Professional 2011
Windows 7 Enterprise, 64-bit
I am trying to use iLogic to create the file types I need to give to my vendors once I have created a drawing.In the .idw file I have a rule that creates a .pdf file and .dwg file. I also want it to activate a rule I have in the .ipt file that creates a .dxf file.
trigger = iTrigger0oType=Left(ThisDoc.FileName(False),3)GoExcel.Open("S:DRAWINGSFolder Types.xlsx", "Sheet1")For rowPN = 1 To 200 If (GoExcel .CellValue("A" & rowPN) = oType) Then oFile = GoExcel.CellValue("C" & rowPN) Exit For End IfNextoFolder = "S:DRAWINGSNOT RELEASED" & oFileIf Not System.IO.Directory.Exists(oFolder) ThenSystem.IO.Directory.CreateDirectory(oFolder)End IfThisDoc.Document.SaveAs(oFolder & "" &
[code].....
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
Is it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
I created a part, then created an assembly and put the part in the assy. Now I have changed the name of the part but it still shows up as the origional name in the assy. How do I get the name in the assy to match the part?
View 9 Replies View RelatedHow can I change transparency of a part within itself or within an assembly? (I.E. leave its original color as is, but changing/"tweaking" its transparency).
View 9 Replies View RelatedHow to change the part that has the pushpin icon on it? i need to change the static part in my assembly.
View 2 Replies View RelatedDear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies View RelatedNew user 2014
Part created in assembly does not update to part file.
The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
I'm having trouble changing a reference part back to normal. It's in a sub nested 2 levels. I earlier had it as a phantom but changed it easily to reference. Now I need it to be normal.
I've tried going into each level to change it. I cannot access it unless I change the BOM to read "Model Structure" since reference parts don't show up under BOM structure. When I click on Reference (it has a little X in it) it will seem like it's going to change but turns back to ref every time.
I went into the lowest sub & was able to change the part to Default through Properties but it just goes to reference again in the main assembly.
After Part is inserted into an assembly and after the Part is changed ( say the length from 16.25 to 17.75), How do I auto change the "Part Number" to match this new length in the parts list?
View 6 Replies View RelatedI have often right clicked a part in the browser of an assembly and edited its properties. This may include stock number, material and adaptability.
Drawings of these assemblies seem to update accordingly. At least initially.
I have noticed often several sessions later, the same properties have defaulted to their original value.
And I came across the statement in the corrections attachment.
What does the highlighted sentence mean, exactly? And which properties respond to a change at the part level when edited in an assembly?
Using Inventor 2012 Windows 7 Dell Precision dual EH(quad core) @ 2.13 GHz 4 G Ram
Is it possible to change the derived part link to another part like you would replace a component in an assembly? My issue is that i created a part and used a derived part within. Well this part number changed and it just so happens that the derived part needs to change as well. I tried the design assistant, and changed the link there but it didnt seem to want to take. I tried renaming the derived part, and opening the file...i get the error but i still am unable to change the link that way either.
Autodesk Inventor 2011
I need to change my parts list style for all of my drawings from this point forward. For the life of me I can't figure out how to do this. I have my project set to read-write and I've tried this 10 ways til Sunday but it won't take. There are several things that I want to achieve but I'd be happy with just one of them for now. All I want to do is remove the ITEM column from my default parts list. After this I want to merge rows by part number, etc.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I started out with a single 3 dimensional piece i had made using sketches, and split it into two using the split feature under the modify tab. Now I would like to take each of those two pieces and copy them into their own individual part files. I could do this by remaking them, but was wondering if I could simply copy and paste them into separate files.
View 2 Replies View RelatedWhenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies View RelatedIs there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedThe default Insertion Point of a part list is its" range box.maxpoint",but I need to make its "rangebox.minpoint" as its InsertionPoint . My code to insert the part list is as follows :
I have tried using the code " oPartsList.RangeBox.MinPoint.InsertionPoint = True" , imitating "oSketchLines(1).EndSketchPoint.InsertionPoint = True" ,but without luck .