After Part is inserted into an assembly and after the Part is changed ( say the length from 16.25 to 17.75), How do I auto change the "Part Number" to match this new length in the parts list?
View 6 Replies
A coworker brought this to my attention and I was also immediately able to reproduce this. We use content center C channels and other common beams a lot. After inserting one into an assembly if you right click and select change size and edit the length it typically doesn't update to the correct length.
Example:
Insert a 10" Ansi MC/C channel any size
right click and select change size
add +.0625 to the existing length and hit apply
measure it at 10.06252 in
repeat change size and type in 10.0625
measure it at 10.0625
repeat change size and type in 10 + .0625
and measure at 10.06252 in
It seems to mess up more when you do math but it also screws up entering a simple number
10.000325 usually ends up as 10.000315 in for me.
Editing the part directly from it's parameter dialog doesn't yield anything like this.
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
Is there any way that values in BOM columns would automatically change depending on the characteristics of the part?
Example:
I have a parametric metal rod that depending on its length has a different part number assigned to it in our company's catalog.
When I change its length in parametric assembly (50" rod is has different number than 70" rod) I want the part number to change as well in the "part number" column.
Is there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies View Relatedi made a sheet metal part.ipt but that file is not updating immediately, i have added
iLogicVb.UpdateWhenDone = True
InventorVb.DocumentUpdate()
also tick marked in parameters for IMMEDIATe update
I created a part, then created an assembly and put the part in the assy. Now I have changed the name of the part but it still shows up as the origional name in the assy. How do I get the name in the assy to match the part?
View 9 Replies View RelatedHow can I change transparency of a part within itself or within an assembly? (I.E. leave its original color as is, but changing/"tweaking" its transparency).
View 9 Replies View RelatedHow to change the part that has the pushpin icon on it? i need to change the static part in my assembly.
View 2 Replies View RelatedI'm having trouble changing a reference part back to normal. It's in a sub nested 2 levels. I earlier had it as a phantom but changed it easily to reference. Now I need it to be normal.
I've tried going into each level to change it. I cannot access it unless I change the BOM to read "Model Structure" since reference parts don't show up under BOM structure. When I click on Reference (it has a little X in it) it will seem like it's going to change but turns back to ref every time.
I went into the lowest sub & was able to change the part to Default through Properties but it just goes to reference again in the main assembly.
Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
I have often right clicked a part in the browser of an assembly and edited its properties. This may include stock number, material and adaptability.
Drawings of these assemblies seem to update accordingly. At least initially.
I have noticed often several sessions later, the same properties have defaulted to their original value.
And I came across the statement in the corrections attachment.
What does the highlighted sentence mean, exactly? And which properties respond to a change at the part level when edited in an assembly?
Using Inventor 2012 Windows 7 Dell Precision dual EH(quad core) @ 2.13 GHz 4 G Ram
Is it possible to change the derived part link to another part like you would replace a component in an assembly? My issue is that i created a part and used a derived part within. Well this part number changed and it just so happens that the derived part needs to change as well. I tried the design assistant, and changed the link there but it didnt seem to want to take. I tried renaming the derived part, and opening the file...i get the error but i still am unable to change the link that way either.
Autodesk Inventor 2011
I need to change my parts list style for all of my drawings from this point forward. For the life of me I can't figure out how to do this. I have my project set to read-write and I've tried this 10 ways til Sunday but it won't take. There are several things that I want to achieve but I'd be happy with just one of them for now. All I want to do is remove the ITEM column from my default parts list. After this I want to merge rows by part number, etc.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
Whenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies View RelatedIs there a standard command or command sequence that allows for the changing of a parameter, say length, of a component from within an assembly. I'm looking to compile a code that allows for a template to be created, then that template will do changes based on text box input and then save out the modified parts with new part numbers.
View 2 Replies View RelatedThe default Insertion Point of a part list is its" range box.maxpoint",but I need to make its "rangebox.minpoint" as its InsertionPoint . My code to insert the part list is as follows :
I have tried using the code " oPartsList.RangeBox.MinPoint.InsertionPoint = True" , imitating "oSketchLines(1).EndSketchPoint.InsertionPoint = True" ,but without luck .
We just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
Is there and easy way to change the base component of a derived part?
The way I use to do it, is to rename the base component. Then open the derived part, and point to the new base component after the "error message".
In the idw environment there is a "Replace Model Reference"" which does it for 2D drawings.
btw. I use Inventor 2013.
I have been creating a drawing of a Assembly and realized that I had drawn it on a Company "D" size border by mistake. How do I change it to a "B" size border without starting over?
View 5 Replies View RelatedI am having a problem changing my tube sizes. Basically when I create a new route and populate the route, I want to be able to change the size without adding hundreds of sizes to the library. So I right click on the tube and select change size. The when I select a different size and select apply nothing happens? I push update and still nothing happens?
When I try to change the tubing size again it shows the size that I change it to but the tube doesn't visually change? I have noticed the same with the hose. What I also noticed is when you change the size on pipes it does change. How it is possible to change the piping sizes by right clicking on it and select change size when this function doesn't seem to work on the tube and hose?
I just download the AutoDesk Inventor 2012 but I didn't use this software before. I just download an example and refer youtube to create my own parts. But when I place all parts together, i.e. assemble all parts, I find that the parts are not looks good because the size either too big or too small. I try the whole afternoon but I still can't find the way to change the size of an individual component.
View 9 Replies View RelatedI have 4 different sized drawing templates made, one each for A,B,C and D size. There are times when I start a drawing on a C size border/sheet and it gets too cluttered as I add views or annotations. Is there any way to insert/change the sheet size to the D sized template without starting over?
View 6 Replies View RelatedI have been working on some spec sheets and, ideally, would like the text size larger to improve readability. When creating text, changing the size is as easy as editing the text and changing the size. With a dimension, however, that method doesn't work. Is there an easy way to change a dimension's text size without having to make a change in the styles??
View 2 Replies View RelatedHow do you change the ratio size of a part. I have a part and made it just a bit smaller than the constraints say. I want to up the ratio of it. How?
View 3 Replies View RelatedI have created a ilogic rule that should set the size and the cut length of my parts. Most of the time the rule behave as I want it to. But sometime it gives me a error. See attached picture. By the way, I have included this rule in my custom content center parts (beam's etc). The rule is:
'Turn off workfeatures
ThisDoc.Document.ObjectVisibility.AllWorkFeatures = False
'check if the part has any geometry
If Measure.ExtentsLength="0" Then
[code]........
Is there any better method to find the overall size of a part model? I tried Range Box method and that gives some inaccuracy if the model have loft feature and fillet on that. But if I use GetExistingFacets the size gives more accurate. At the same time in a round part model with a cut, the GetExistingFacets give inaccuracy and range box method gives better result. Below is the X, Y, Z sizes of the two models with the above mentioned methods.
Round Part (Part1)
Measured with GetExistingFacets method = 129.934196472168 x 126.422719955444 x 25
Measured with Range Box method = 130 x 126.514225996919 x 25
Rectangular Part (Part2)
Measured with GetExistingFacets method = 300 x 300 x 30.0000286102295
Measured with Range Box method = 300 x 300 x 30.4094903224854
find attached part models which I used.
I am having trouble changing the dimension text size of any 2d or 3d sketch..
the default has changed for some reason (i might have accidentally changed it while looking for something the other day) but i need to know how to change it back.. I can't do anything without a dimension getting in the way!
How do you change the dimension text size in an .idw 2D drawing? The dimension text and arrowhead size is too small and I would like to make it sligthly larger.
View 3 Replies View Relatedwhy I have a part file that is almost 12MB in size yet it contains absolutely no features? I would attach the part but it's too big to upload.
View 2 Replies View Related
