AutoCAD Inventor :: Change Frame Link To Normal Part
Feb 27, 2012
I have several frames built by Frame Generator in project.
Than one frame has been diminished much while design so I use just several frame links just like parts without skeleton.
Those frame links I have renamed since I have several copies and I would like to have unique name. Now when I start the assembly consisting those links Inventor naturally inquires about missing files.
I show to renamed one and everything works ok except when I start the file again it asks again nevertheless file has been saved. Inventor still remember this frame link names as it used to be in browser and does not accept replacement.
[URL]........
I wish I must not rebuild those parts from scratch again. Therefore I have two questions
Is it possible to save this frame part as normal part (save as does not do it) ?
Is there some other way to get rid of Frame Generator status of some part built by Frame Gen?
View 1 Replies
ADVERTISEMENT
May 14, 2013
I have a part that was made from content center and modified further. I would like Inventor to no longer recognize this part as a content center part. It has been renamed and migrated to 2013 format, but still when inserting into an assembly the assembly recognizes it as a content center part in the browser.
Also, the browser title for the part will not update with the file name.
View 5 Replies
View Related
Oct 21, 2013
I'm slowly getting there with iLogic, so I'm really just looking for the function / call to change one part from Frame Generator, to another part from Frame Generator.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
View 2 Replies
View Related
Dec 23, 2011
I'm using ilogic rules to customize an assembly generated by content center of frame generator. I would like replace the parts on my assembly when I change an assembly parameter multivalue.
View 4 Replies
View Related
Apr 3, 2013
I have a structrual rectangular tube as shown in the picture below. I need to fold the four flanges inward to create a sort of point or pyramid.
View 9 Replies
View Related
Apr 11, 2013
Some times we use standard parts which we could not find in content center. We creat part ourselves. But it looks like standard part in BOM or part explorer window...
I want to change type of part to PURCHASED type and icon like other purchased parts like bearings or bolts...
Is this possible?...
It can be also assembly parts like bearings. Bearings have many parts but it looks only one part in part explorer. This is very good. I want same thing too...
View 9 Replies
View Related
Jun 21, 2012
Very new to inventor 2012 coming form solid edge way back in the day (1998 to 2008) to autocad 2d. getting ready to move to the inventor and trying to figure out some things. searched videos , training etc but not even sure what to call it.
My questions are:
1. I design stamping dies and I will want to build sections from a stock strip with the outside then adding hole, dowels etc. what is the best work flow for this? It is kinda the middle between top down and bottom up.
2. what is the best work flow for adding counter bore , dowel in the block and then having this tied to the mating block so if I move the location of the holes in the block then move as well?
View 5 Replies
View Related
Oct 1, 2005
I'm having trouble changing a reference part back to normal. It's in a sub nested 2 levels. I earlier had it as a phantom but changed it easily to reference. Now I need it to be normal.
I've tried going into each level to change it. I cannot access it unless I change the BOM to read "Model Structure" since reference parts don't show up under BOM structure. When I click on Reference (it has a little X in it) it will seem like it's going to change but turns back to ref every time.
I went into the lowest sub & was able to change the part to Default through Properties but it just goes to reference again in the main assembly.
View 7 Replies
View Related
Apr 24, 2012
Has used the frame generator to model the posts and horizontal pipes that would go into a chain link fence?
We have generated several fence models as simple part files. They work in that they get the basic idea across and they're fairly quick to create. But I started thinking about a more detailed model and I wondered if it would be an appropriate use of the frame generator.
View 2 Replies
View Related
Jul 6, 2012
Is it possible to link one part file dimension to another part file?
1. Part first is a cylinder in parametric table i changed it,s name OD , ID and thk. ( find attachment )
Cylinder ID is ( ID=105)
2. Then i made 2 nd part whose step od ( od=102) is going to insert in to cylinder id.There is 3 mm clerance every time
3. So i have to make equction in 2 nd part that ( Step OD= ( ID-3).
means next time when i will change ID of cylinder OD of 2 nd part will ger changed automatically minus by 3 mm than id of cylinder.
View 3 Replies
View Related
May 31, 2011
I was recently updating an assembly which contained a part that had been subsequently deleted from my folders. I skipped it while opening the assembly, then deleted the part in the Model Tree (and replaced it with a different component). So, to summarize, the assembly no longer has the part in the Tree, and the part does not exist anymore on my system. These parts and assemblies have not been Vaulted, so that should not be an issue either.
My problem is that every time I open the assembly, it wants me to resolve this deleted part, and I have to skip it every time just to proceed. Once the file is loaded, I get no other issues, no "red cross" items, just a question mark next to the file name at the top of the Tree indicating that the file needs to be resolved.
The old part is gone; I tried recreating it using the same file name, and using the same third-party SAT file from which it was originally generated, but Inventor detects that it's not the original part and won't accept it.
How to get past this "part resolution" issue?
Autodesk Product Design Suite Premium 2013
Inventor 2013 64-bit Edition
Win7-64, 8-core Intel® Xeon® CPU W3550 @ 3.07GHz
NVIDIA GeForce GTX 560 Ti
454 GB HD, Intel® ICH10R SATA AHCI Controller
SpaceNavigator, 3.14.2 / 6.14.0 / 3.18
View 6 Replies
View Related
Jan 26, 2011
Is it possible to change the derived part link to another part like you would replace a component in an assembly? My issue is that i created a part and used a derived part within. Well this part number changed and it just so happens that the derived part needs to change as well. I tried the design assistant, and changed the link there but it didnt seem to want to take. I tried renaming the derived part, and opening the file...i get the error but i still am unable to change the link that way either.
Autodesk Inventor 2011
View 9 Replies
View Related
Aug 7, 2013
I have facing issue to link the ipart members in to the new part.
for example, i have one machining part that machining part showing make from number. so, i created make from first. it has 10 instance.using iPART i created 10 members.after that i need to be do the machining.machining drawing also having 10 members. How i call the each make from members in to the machining model.
View 7 Replies
View Related
Jan 21, 2013
I wanted to know if there is a way to restore the link between a part/assembly and a drawing so that the drawing will open when "Open Drawing" is selected from right clicking the part/assembly from the Model browser in Inventor.
View 1 Replies
View Related
Feb 22, 2012
I am trying to link a hole feature in a part in an assembly with the number of a particular feature in another part within the assembly. I have a base plate part with a coutersunk hole feature that I want to pattern by linking it to the number of bosses in another part within the same assembly.
View 6 Replies
View Related
Jul 14, 2012
I'm trying to see if I can write a rule that will link a custom property at the part level in a template and have it update when I copy the part and drawing to a new design. Below is the formula I'm using and it works in the original files but when I use Design Assistant to create a copy for a new design, this formula will not update.
iProperties.Value("Custom", "Title")=Parameter("Bearing_#01.ipt.Build_Title")
View 5 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Jan 27, 2013
Im using frame generator, i create my skeleton part, start up frame generator, select my frame types and connect them to the lines, press OK, accept the default filenames then get this error:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for ANSI ANSI AISC (Rectangular) - Flat Bar Steel could not be located in the Content Center library. and no parts are put in the assembly.
I have updated the content centre etc and installed all the latest updates. I have also reinstalled Inventor and The local content centre but the error persists.
Ive included a couple of screen shots that show the error.
frame generator is useless until this is fixed and i need to design some frames.
w7u-64sp1,iv13sp1.1,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
View 9 Replies
View Related
Oct 15, 2012
I would like to know how to notch (or similar) a frame made in Frame Generator to a solid part?
I have that problem when I'll connect a truss frame to a specific part.
View 2 Replies
View Related
Jul 18, 2013
In the part file I created a table with the 2 different sizes used. I can manipulate the part by editing extrusion 1 and the ribs and slots adjust accordingly. However, I would like to keep track of the wire trough used in a similar fashion as a tube weldment, one part, but multiple lengths used, for BOM tracking.
AS soon as I author the part to structural shapes I get issues with the extrusions and sketches, looks like the initial geometry is lost it's constraints to projected lines. (sketches are full of the pink lines).
View 8 Replies
View Related
Jan 10, 2014
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
View 4 Replies
View Related
Feb 11, 2013
Inventor Pro 2013.
I would like to make the part named "Frame_base" an assembly on its own. see the attachment. I am new to Inventor and I thought I could demote it but the selection is grayed out. The main reason I want to do this is because I would like to create a 2D drawing of it with a parts list to give to the welder. This will be my first drawing and maybe I'm doing this wrong. It appears that I need to bring in the base view file, and I don't see a way to do that unless the frame is its own assembly.
View 1 Replies
View Related
Mar 18, 2013
I've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies
View Related
Jun 28, 2010
I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
View 9 Replies
View Related
Jul 17, 2013
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
View 6 Replies
View Related
Sep 21, 2012
when I have part make with frame generator. I have problem expand tree in drawing.How expand tree in drawing when part make with frame generator.
View 2 Replies
View Related
Mar 13, 2012
Been wondering, if a part that I create, make a drawing for and save, can I take the part, save as, and then take the drawing, save as, and re-link the drawing to the newly 'saved as' IPT?
View 2 Replies
View Related
Feb 25, 2012
I have two parts, one uses some parameters from another one by link.
Now I have copied both and need to update ties between copies since a copy still has a link to original part.
Seems like there is no possible to just change or edit a link from one part to another in Parameters window.
Instead to update a new link I should clean all borrowed parameters in all sketches, delete the folder, make new link and set all parameters back. is it possible to change or edit the link in some easy way?
View 4 Replies
View Related
Mar 13, 2012
I am building frame using frame generator. Well, firstly I build a sketch and then afterwards from that sketch I already make frame itself.
What I want to do iis when I am changing length of some frame memebers in a sketch, I want frame members to be changed as well.
For example:
From here you see that everything is ok. Frame members are according to the sketch.
But when I am changing the sketch, frame stais as it is on the first picture without any changes. Previously it was changing, but then something happened and it doesn't change anymore.
For me it seems that reference skeleton of a frame is not referenced to the sketch of the frame .ipt.
Autodesk Inventor 2014 PRO x64
Running on:
HP Z400 Workstation
Processor- Intel(R) Xeon(R) CPU W3565 @3.20GHz
RAM- 6.00 GB
64 BIT
View 9 Replies
View Related
Jun 3, 2013
I've made a number of frame generated assemblies with standard ISO 30X30X3 L-beams. Now they wanna change it to another dimension still standard just 40X40X4 instead.
I'm pretty new to this but shouldn't I be able to do this for an assemble in one go with frame generator?
View 2 Replies
View Related
Apr 18, 2013
I get this error message when attempting to change the material in the frame generator.
View 9 Replies
View Related
