I'm using ilogic rules to customize an assembly generated by content center of frame generator. I would like replace the parts on my assembly when I change an assembly parameter multivalue.
View 4 RepliesI'm slowly getting there with iLogic, so I'm really just looking for the function / call to change one part from Frame Generator, to another part from Frame Generator.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
I have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
Im using frame generator, i create my skeleton part, start up frame generator, select my frame types and connect them to the lines, press OK, accept the default filenames then get this error:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for ANSI ANSI AISC (Rectangular) - Flat Bar Steel could not be located in the Content Center library. and no parts are put in the assembly.
I have updated the content centre etc and installed all the latest updates. I have also reinstalled Inventor and The local content centre but the error persists.
Ive included a couple of screen shots that show the error.
frame generator is useless until this is fixed and i need to design some frames.
w7u-64sp1,iv13sp1.1,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
In the part file I created a table with the 2 different sizes used. I can manipulate the part by editing extrusion 1 and the ribs and slots adjust accordingly. However, I would like to keep track of the wire trough used in a similar fashion as a tube weldment, one part, but multiple lengths used, for BOM tracking.
AS soon as I author the part to structural shapes I get issues with the extrusions and sketches, looks like the initial geometry is lost it's constraints to projected lines. (sketches are full of the pink lines).
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
Inventor Pro 2013.
I would like to make the part named "Frame_base" an assembly on its own. see the attachment. I am new to Inventor and I thought I could demote it but the selection is grayed out. The main reason I want to do this is because I would like to create a 2D drawing of it with a parts list to give to the welder. This will be my first drawing and maybe I'm doing this wrong. It appears that I need to bring in the base view file, and I don't see a way to do that unless the frame is its own assembly.
I'd like to create a part number generator using iLogic. The rule would run as follows:
If the iProperty "Part Number" was not blank or the same as the file name (as Inventor default), then a question box would pop up asking if you would like to overwrite the part number. If one were to select yes, then the following would happen.
iLogic would open an xls that is on the network. The xls would have two columns. Column A would be the part number, B would be the filename associated with that part number.
Column A (the part number) is a sequential count in the form of 6 or seven digits. The format would be something like =TEXT(ROW(A1),"JFRC-000000")
Everytime the part number generator rule is triggered, it would create a new part number on the next blank row, copy this part number to the Part Number iProperty and assign the file in which the iLogic rule was executed to column B in the xls, save and close.
If, when the rule is triggered, the Part Number property is blank or the same as the file name, the user would not be asked if they would like to overwrite the part number. This rule would be triggered manually from a form.
I've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies View Relatedwhen I have part make with frame generator. I have problem expand tree in drawing.How expand tree in drawing when part make with frame generator.
View 2 Replies View RelatedI get this error message when attempting to change the material in the frame generator.
View 9 Replies View RelatedParts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
Before using iLogic, I created lot of iAssembly and iPart. I could change iPart factory member when I need in iAssembly.Now, I want to move everything to iLogic.
how could I change the part by iLogic code?
For example:
I generated "Part1.ipt" and "Part2.ipt",...... (I have hundred of member)
In my assembly, sometimes, I need use Part1.ipt, sometimes I need use Part2.ipt.
Which is the iLogic Code I should to use?
Inventor 2009, WIN XP.
Autodesk Inventor Professional 2013 (64 Bit) SP2
Windows 7 Professional Service Pack 1
Intel(R) Xeon(R) CPU E5645
12.0 GB Memory
I got this code earlier from Curtis_Waguespack, and i would like to add a setting... When i run this rule it Derives the assembly, but LOD is set to Master, i would like it to be set to my own (Configurator) LOD...
I don't seem to be able to find anything in this code, that defines LOD...
So far im doing ok with the standard ilogic code, but when it´s API or VBA code im lost.. which leads me to this.. i've been searching the forum back and forth to find a code that performs the feature "Shrinkwrap", and somehow everything i have found so far does not work... even the code example in Inventors help menu under programming, Therefore im trying to solve this with Curtis's code as staring point..
'set a reference to the assembly component definintion.'this assumes an assembly document is open.Dim oAsmCompDef As AssemblyComponentDefinitionoAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition 'define the path and file nameDim sPathandName As StringsPathandName = ThisDoc.PathAndFileName(False)
[Code] .......
I have several frames built by Frame Generator in project.
Than one frame has been diminished much while design so I use just several frame links just like parts without skeleton.
Those frame links I have renamed since I have several copies and I would like to have unique name. Now when I start the assembly consisting those links Inventor naturally inquires about missing files.
I show to renamed one and everything works ok except when I start the file again it asks again nevertheless file has been saved. Inventor still remember this frame link names as it used to be in browser and does not accept replacement.
[URL]........
I wish I must not rebuild those parts from scratch again. Therefore I have two questions
Is it possible to save this frame part as normal part (save as does not do it) ?
Is there some other way to get rid of Frame Generator status of some part built by Frame Gen?
The commented code does not work. I want to be able to open a part and change its size parameters before i open the assembly. this code will run as an external rule in a new empty file.
If i can do it without opening the part, that is even better. Test can I open a part, change a param, then close part.
Dim fname As String
fname ="C:Workspacemy_progchanF_BB_L.ipt"
Dim pDoc as PartDocument = ThisApplication.Documents.Open(fname,False)
pDoc = ThisApplication.Documents.Open(fname)
These are just attempts to find a syntax that works. I need the method to change the parameter.
'param = pDoc.PartComponentDefinition.Parameter.Param("TKNS")
'pdoc.parameter.Param("TKNS") = 8
pdoc.Save
pdoc.Close
I have a flange that I use iLogic and the parameters list to update the different styles. My problem is that my flange won't update until after I hit save and update. My other square flange is not this way. As soon as I change the parameter in my square flange it immediately updates. Is there anyway I can get my round flange to update immediately like my square flange? I attached pictures below.
View 1 Replies View RelatedHow to change the view rep in an assembly
(using oAsmCompDef.RepresentationsManager.DesignViewRepresentations.Item("Red").activate) -
However I am trying to achieve the same with iLogic in a part file (multi-solid).
I downloaded a model off a website, it is, (excuse my electrical background ignorance) a jumper for terminal blocks.Our electricians use these and cut them down to size as needed.
Is there a way to use iLogic and a form or message box, to prompt upon opening the part as to how many jumpers are needed for the current assembly> It comes stock with 10, but they sometimes only use 2, 3 4 etc. etc..
I didn't model the part, but I can if it will make the rule easier to write.My idea I suppose was to have the part modeled with 2 jumpers and then use ilogic to create more if necessary.
I'm looking for a way to change the size of a custom content center part via ilogic. I found a way to replace them on this forum but this is not ideal for, because that creates a new part every time i change the size of the part.
View 2 Replies View RelatedWhile using the frame generator's "Trim - Extend to Face" command on short members, the wrong end of the member is being trimmed. Is there a way to choose which end to trim on short members?
View 9 Replies View RelatedHow to use frame generator in assembly? I find difficult to assemble a huge assembly.
View 1 Replies View RelatedI'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection".
Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?
All of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.
Inventor Professional 2014.
Windows 7 64 bit.
I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.
View 3 Replies View RelatedComing from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.
Wondering if there was a solidworks 'end cap' equivalent.
[URL] essentially a weldment driven and generated part which doesn't need much thinking about.
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
Aside of beams and so I could use some metal studs. Seems like there are not any.
View 9 Replies View Related