AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
May 22, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies
ADVERTISEMENT
AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator
Apr 30, 2013After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
AutoCAD Inventor :: Custom Profile In Frame Generator
Jun 20, 2012I recently started to publish custom profiles in my Content Center.
What I wanted to do is to add a custom profile to content center and use it in frame generator. The problem is that I want to write in my Stock Number iProperty the Ordering number of the profile type and the generated length. I did everything in the content center publisher, but somehow it dosent work. It always writes my published file length. I can see that Inventor has the tools to do this, but somehow it dosen't work.
Inventor 2012
Win 7 64-bit
Dell Precision T5400
Intel Xeon 2,5 GHz
8 Gb RAM
NVIDIA Quadro Fx 3700
AutoCAD Inventor :: Custom Profile Notch In Frame Generator
Jan 6, 2014I created a custom profile, IS34, and published it successfully as a structural shape for the frame gererator. My problem is I get an error when I try to use the notch command in frame generator between two of these frame members. I have tried creating a custom notch in the profile definition, but this did not work either. I expected one profile to counter-profile the other.
IS34 Profile
IS34 Frame
Error
I am using Inventor 2013.
AutoCAD Inventor :: Delete Frame Generator Custom Center Profile
May 8, 2012I am experimenting with adding profiles to CC to be used in frame generator - how do I delete them?
In cc editor all delete buttons are grayed out.
AutoCAD Inventor :: Base Unit Setup When Adding A Custom Profile To CC Frame Generator
May 8, 2012When I add a profile to Custom Centre to be used in a frame generator, in Base Qty by default it comes up as in, I want it Each. Where to change it?
View 1 Replies View RelatedAutoCAD Inventor :: Frame Generator Member Offset
Dec 19, 2013I have created a user parameter in a assembly, then creating a member with FG i use that parameter as member offset. The same with other members.
Changing from Parameters that parameter no update happen, I have tried rebuild all, refresh..no working. The only thing that works, is to use the "change" command , select my member(s) , change nothing, than ok.
Then it update.
Is it a software limit? A bug? An error in the workflow?
AutoCAD Inventor :: Can't Delete Frame Generator Member
Jul 7, 2013I have a sick FG member but when I try and delete it I get this.
View 5 Replies View RelatedAutoCAD Inventor :: Structural Member Lengths In Frame Generator
Jul 27, 2012I have created a few new structural parts that I am in the process of publishing to the content center.
I got one of them in and have it working very well except for one item. If I place this structural piece into an assembly as a stand alone part just selecting the length and the material as the key inputs, it shows the proper length in the part number and the description just fine. If I insert this same structural piece in a skeleton using the frame generator, then the length that shows up in the description is the default one that the part was originally created to. How do I get the length to show up in the frame BOM correctly when parts are created using the frame generator?
This works using the structural members out of the box.
AutoCAD Inventor :: Frame Design - Trim To Frame Fails With Custom Profile
May 20, 2013I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies View RelatedAutoCAD Inventor :: Frame Generator / When Changing Member Type Does Not Update All IProperties
Nov 25, 2009During some discussion with other uses of Inventor I was ask if I knew about a problem relating to Changing a member size in Frame Generator and the iProperties maintain the old members properties.
The basic problem is as follows:-You start with a simple frame, create all of the members save and then added to a drawing. The members frame come from the content centre which have been copied into a Custom Library to enable addition parameters to be added along with addition iproperties being automated such as DESCRIPTION.
Once the frame and associated members have been created and then save, if a user wants to change the size of the member inventor has to create a new part file and then inserts into the frame generator frame. However, I have found that if you review the iProperties of the new file the DESCRIPTION is the same as the one that was replace, however it was strange to see that the STOCKNUMBER and PART NUMBER was updated correctly. It seems to be only a problem with the DESCRIPTION property.
AutoCAD Inventor :: Split Errors Within Frame Generator?
Apr 4, 2012I'm using frame generator.
The design doctor indicates I have errors re splits have no effect. When I check the part I find several end conditions. Some times a red box and arrows shows up at one of the ends. I can redo an end condition with delete existing end conditions checked and it eliminates the extra end conditions. The red box and arrow stays behind. This does ot always hapen. Is there any way to delete the red box and arrow?
AutoCAD Inventor :: Unable To Create Custom Frame Member Part
Jun 28, 2010I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
AutoCAD Inventor :: Custom Lib For Frame Generator
Oct 6, 2011How do you have the frame generator "point" to a custom parts directory to create from?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
AutoCAD Inventor :: Frame Generator Custom Profiles
Sep 18, 2013I'm trying to find out whether I can create custom frame generator profiles in IV2014. Any solutions that I've come across aren't viable (referencing files that don't exist on my machine etc).
View 4 Replies View RelatedAutoCAD Inventor :: Use Custom Library In Frame Generator?
Jan 26, 2012My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
AutoCAD Inventor :: Custom Table For Frame Generator?
Feb 6, 2012I would like to know if there is a way to suppress size in a custom table for frame members. So far, I've copied the ANSI hss square tube library to another name and it is not linked to the previous family. What I need to do is make only certain size of these tubes available and the only way I found was to delete them. The things is I don't want to delete them because I may need them in the future. Also, when I have different materials in that table they appear as 2 diferent size in the frame generator insertion window. For example, if I have in my table a 2x2x1/8 tubing 1 in aluminum and the other in steel, I will have 2x2x1/8 X2 in the size selection window.
View 6 Replies View RelatedAutoCAD Inventor :: Custom Notching In Frame Generator
Jul 12, 2013[URL] ...... I have a large frame (beams and columns) made up of W shape structural steel. (10x19 and 10x26 mostly)
I need to create notches with some more clearance between the beams. Apparently you can create custom notch profiles, but I can't figure out how to do this with these members (normal content center beams) - everything I am finding is showing people creating custom beams from scratch.
Ideally, I can create one notch profile and apply it to all the beams - because I don't want to create 150 different profiles. So is it possible to add a notch profile to existing content center members?
Here is my frame - there will be lots of notching at the beam intersections.
Here is an intersection - I would like at least 1/8" clear between the edges of the intersecting members.
AutoCAD Inventor :: Custom Content Center And Frame Generator BOM
May 1, 2012I am using a student version of Inventor 2012 to design the FSAE Chassis for our University team this year. I was not able to find suitable geometry for the required tubing to make the chassis. So I found a guide on setting up a Custom Content Center and publishing parts. I have followed that. The Chassis has turned out great but now I am trying to draw it up and the BOM is not populating as desired.
A Summary:
-Custom Project file with Read / Write Library added.
-Custom tubing geometry created and published to the Library.
-Chassis constructed using standard Frame Generator techniques.
Previously I had the chassis modelled using standard Content Center parts and the BOM would populate with the individual tubes in the drawing environment. Now with the custom tubes the BOM calls up each of the individual tubing sizes, ONCE only and has large quantities. The automatic "Measure" Column is also populated with "*Varies*".
In the Frame Generator wizard each tubing size has come up as it's own "Family".I believe this is because I have published the different part sizes individually. I am guessing I should have published only the one active part but with variable geometry selectable in the "Size" drop down?
I have tried forcing the assembly into the "All Levels" view with the Bill of Materials pop-up in the Assembly environment, but even this is not populating correctly.Something else I have noticed is the individual tubes are using a different naming convention in the model tree.
AutoCAD Inventor :: Update A Custom Frame Generator Shape
Mar 18, 2013I want to update a frame generator shape so it shows as a phantom part and won't show on the parts list. I don't know how to do this. Would I re-publish this part again? I can't just change the BOM properties in the original part file. What's the best approach here?
View 4 Replies View RelatedAutoCAD Inventor :: Custom Content Center And Frame Generator
May 25, 2011We have invested much time in creating custom content center family tables based on exisiting ANSI tables, etc. so that we can suppress sizes and shapes we do not use and have the descriptions and stock numbers show up both so BOM and parts lists will roll up identical parts and as our purchasing department requires.
We have just discovered, however belatedly, that while these custom tables function just fine when placing an individual part, frame generator apparently does not see these and gets it's info from somewhere else. I have seen a similar post which references an McadForums post, but the link provided is dead.
[URL]....
How to point frame generator to customized CC familes?
AutoCAD Inventor :: Frame Generator Custom Shapes Library
Feb 1, 2012I have a bunch of custom shapes I use in the frame generator and I want to transfer them to another computer. Where are these located and how would I transfer them? I'm using Inventor 2012.
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Inventor :: Frame Generator And Custom CC Library Naming Convention
Jan 19, 2012I have set up a Custom CC library that contains structural shapes.In the Family Table I have a Stock No column which references the value in my DESIGNATION columnThe Stock No column is mapped to Project.Stock NumberUnder Template Parameter (in Parameter Mapping) I have mapped StockNo to Design Tracking Properties: Stock Number.
When I use Frame Generator to add a structural shape, from my library, the name shown in the Model Browser is formatted as follows (Standard)+(Unique Number) and not (Standard)+(Stock Number)+(Unique Number).
How to get the Stock Number to show in the model Browser. How to get the members name to show, with the correct format, in the Model Browser as this will make identifying members in an assembly easier.
Please see attached for Model Browser pic.
Gigabyte Q1542
Win 7 Pro 64Bit
i5 - 3230M
8 GB Ram
Intel HD Graphics
Nvidia GeForce 640M / 2GB with Optimus
AutoCAD Inventor :: Custom Content Centre Shapes And Frame Generator?
Oct 16, 2012I have been trying to add my own shapes to the Content Centre, with some success, but for being able to use them in Frame Generator. I was able to Author a new part and publish it to Structural Shapes and it works very well. However when I try to use it in Frame Generator there is an issue that I do not understand. Frame Generator recognises the family and all of the different sizes and materials, but when it come to inserting the part, i get the following message:
I am not sure what this means. The part family is in my own library in a seperate category. I don't know what/where template file needs to be and is that the same ipt file that I used to create the Content Centre part/shape? Do I need to create a new Standard rather than "attaching" it to the AS Standard?
AutoCAD Inventor :: 2011 Frame Generator Custom Notch Profiles
May 9, 2010tried to author notch profiles in the structural members for 2011?
The what's new states:
>Publish Notch Profiles
>The Notch command is enhanced so that you can define and reuse frame cross-sections. This is particularly >useful when you need a minimal gap between two connected frames.
>You can sketch a notch profile, extrude it, convert it to an iPart, and author and publish the iPart to Content >Center. Then you can apply the notch to cut another frame during the Notch process.
AutoCAD Inventor :: Publishing Custom Parts Into Content Centre / Frame Generator
Aug 21, 2012I am trying to create/publish custom shapes into Content Centre and for use in Frame Generator. I can create the i-Part and configure the parameters I want to enable different sizes - no problem. However when I go to "Publish Part" ()
I get the following error.......
do I need to save the ipt file in a different location? What dependencies are there? I get the same result if I follow the Inventor tutorial using the brace.ipt part....
AutoCAD Inventor :: Custom Profile Trim To Frame Error
Nov 14, 2012At my company we have a custom CC library with custom profiles for use in frage generator. We are having a problem with one of the frames. Everything goes well when the profiles is inserted.
But when I try to "trim to frame" the intersections of two profiles, it does not trim them correctly. It trims them in a 45 degree angle. As you can see on the attached jpg file.I tried everything. Checked the sketch, deleted the profile, republished the part.
AutoCAD Inventor :: Frame Member Won't Update
Aug 7, 2012Frame members that are trimmed to work planes in the skeleton won't update when these planes are moved. This is not how it is supposed to work, right?
View 1 Replies View RelatedAutoCAD Inventor :: Hole In Frame Member?
May 19, 2008Is if possible to create a hole in an assembly created with Frame Generator? (Inventor 11)
View 9 Replies View RelatedAutoCAD Inventor :: Frame Member Lost Reference
Nov 7, 2012is there a way to reconnect a frame member to a other sketch line? Lets say i've altered my sketch and delete a line to which a member was referenced. I get the error when rebuild the assembly.
When click change and select the said member i cannot select a new sketch line..
AutoCAD Inventor :: Frame Member Description Field Not Updating
Jan 12, 2012I have a user that is creating frame work using custom members copied from the standard. We have edited the frame members to use the company's part numbers and description and everything works fine. The Parts List populates with the correct part number / stock number and description just fine. I have customized the Part List style to display the stock number if one is available so that it shows correctly.
The problem comes when changing the size of a frame member out. Frame Generator creates a new file for that member and the Parts List displays the correct Stock number but the description still shows the original size's description not the one associated to the new member's size.
I haven't tried it but I am sure that deleting the Parts List and reinserting might fix the problem but there are other lines in the Parts List that have Static overrides and the user would have to redo all that. Why does the PN/Stock Number update correctly but the Description does not?
Dell Precision T3500
Xeon 2.13GHz - Windows XP sp3
3GB RAM
nVidia Quadro FX 580
Erik J. Kurek
MCADAE, ICE, MICE
Manufacturing SME
Inventor 2013
Dell Precision WorkStation T3500
Bus Clock: 4800 megahertz
2.40 gigahertz Intel Xeon
8192 Megabytes Installed Memory
Windows 7 Professional (x64) Service Pack 1
NVIDIA Quadro FX 3700