AutoCAD Inventor :: Structural Member Lengths In Frame Generator
Jul 27, 2012
I have created a few new structural parts that I am in the process of publishing to the content center.
I got one of them in and have it working very well except for one item. If I place this structural piece into an assembly as a stand alone part just selecting the length and the material as the key inputs, it shows the proper length in the part number and the description just fine. If I insert this same structural piece in a skeleton using the frame generator, then the length that shows up in the description is the default one that the part was originally created to. How do I get the length to show up in the frame BOM correctly when parts are created using the frame generator?
This works using the structural members out of the box.
View 9 Replies
ADVERTISEMENT
May 22, 2013
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies
View Related
Apr 30, 2013
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
View 2 Replies
View Related
Dec 19, 2013
I have created a user parameter in a assembly, then creating a member with FG i use that parameter as member offset. The same with other members.
Changing from Parameters that parameter no update happen, I have tried rebuild all, refresh..no working. The only thing that works, is to use the "change" command , select my member(s) , change nothing, than ok.
Then it update.
Is it a software limit? A bug? An error in the workflow?
View 2 Replies
View Related
Jul 7, 2013
I have a sick FG member but when I try and delete it I get this.
View 5 Replies
View Related
Nov 25, 2009
During some discussion with other uses of Inventor I was ask if I knew about a problem relating to Changing a member size in Frame Generator and the iProperties maintain the old members properties.
The basic problem is as follows:-You start with a simple frame, create all of the members save and then added to a drawing. The members frame come from the content centre which have been copied into a Custom Library to enable addition parameters to be added along with addition iproperties being automated such as DESCRIPTION.
Once the frame and associated members have been created and then save, if a user wants to change the size of the member inventor has to create a new part file and then inserts into the frame generator frame. However, I have found that if you review the iProperties of the new file the DESCRIPTION is the same as the one that was replace, however it was strange to see that the STOCKNUMBER and PART NUMBER was updated correctly. It seems to be only a problem with the DESCRIPTION property.
View 9 Replies
View Related
Apr 25, 2012
I'm using 2012 Professional and I would like to know if there is a way to insert a structural member into a part file instead of having to use Frame Generator to get structural shapes from the content center withough having to manuall draw the section view of the member..
View 5 Replies
View Related
Jul 28, 2011
I created a structural member of Pro-Panel II and placed it like a column. This works great, except when I need to trim the excess off at the end of a wall. I tried using a body modifies and it works in model view, but it doesn't in plan view.
View 1 Replies
View Related
Mar 11, 2013
I've attached a structural member. Is it possible to tag each end individually and have ACA report if it's the high end or low end of the structural member?
View 1 Replies
View Related
Aug 7, 2012
Frame members that are trimmed to work planes in the skeleton won't update when these planes are moved. This is not how it is supposed to work, right?
View 1 Replies
View Related
May 19, 2008
Is if possible to create a hole in an assembly created with Frame Generator? (Inventor 11)
View 9 Replies
View Related
Apr 5, 2012
I had created a structural member using the structural member wizard. I used many instances of the member in my drawing. However, the thickness of the member needs to be modified. Is there a method to modify the existing custom structural member without creating a new custom structural member?
View 2 Replies
View Related
Nov 7, 2012
is there a way to reconnect a frame member to a other sketch line? Lets say i've altered my sketch and delete a line to which a member was referenced. I get the error when rebuild the assembly.
When click change and select the said member i cannot select a new sketch line..
View 1 Replies
View Related
Jun 2, 2011
I ran into a problem with the structural member wizard today. I was making up a bunch of glulams and everything was doing just fine, then all of a sudden the wizard stopped accepting new values for the member depth. No matter what you try to enter, it is rejected and a value of 1'-0" is placed in the field. It will accept new values for both width and lamination depth however. I tried to make a member of another material (steel) just in case it was just the glulams. No luck, they behave the same way, you can't set the beam depth. I also tried restarting ACA, working in a completely new (and clean) file, as well as restarting my computer, it didn't work.
I really don't want to have to go through the repair/reinstall circus if I don't have to.
View 1 Replies
View Related
Jan 26, 2012
How do you make both the Plan and Plan Low Detail both show in bold as being current in the display properties of a structural member?
View 3 Replies
View Related
Jan 12, 2012
I have a user that is creating frame work using custom members copied from the standard. We have edited the frame members to use the company's part numbers and description and everything works fine. The Parts List populates with the correct part number / stock number and description just fine. I have customized the Part List style to display the stock number if one is available so that it shows correctly.
The problem comes when changing the size of a frame member out. Frame Generator creates a new file for that member and the Parts List displays the correct Stock number but the description still shows the original size's description not the one associated to the new member's size.
I haven't tried it but I am sure that deleting the Parts List and reinserting might fix the problem but there are other lines in the Parts List that have Static overrides and the user would have to redo all that. Why does the PN/Stock Number update correctly but the Description does not?
Dell Precision T3500
Xeon 2.13GHz - Windows XP sp3
3GB RAM
nVidia Quadro FX 580
Erik J. Kurek
MCADAE, ICE, MICE
Manufacturing SME
Inventor 2013
Dell Precision WorkStation T3500
Bus Clock: 4800 megahertz
2.40 gigahertz Intel Xeon
8192 Megabytes Installed Memory
Windows 7 Professional (x64) Service Pack 1
NVIDIA Quadro FX 3700
View 3 Replies
View Related
Oct 10, 2012
I'm with a problem here, that when i try to change a material from a frame member, i got the error below:
[WARNING] Frame Generator: Errors occurred while attempting to change frame member(s).
[WARNING] Problems occurred during changing Frame Member(s)
[ERROR] A change could not be completed. The reason for the failure is unknown. Please retry.
The structure that i'm trying to change, was created in IV 2012 SP1, and now I'm editing it in IV 2013.
All the pieces of this project were converted to the new version, and the only big difference from 2012 in this case i think that is the materials library, that I created a new one and set on project as default.
The strange, is that if I enter frame by frame and go to iProperties>Physicals, there i can change the material normally (but with a big wate of time ofc).
View 3 Replies
View Related
Feb 17, 2012
I have created a frame using the frame creator with all the individual members listed in the frature manager. When I check this into the vault it goes in fine.
When I create a second frame (seperate frame file) it uses one or two of the same fram types as the first frame. The problem comes when I go to check this into the vault it says the member already exists.
I have been told and I am seeing it that the frame creator always starts with "001" and numbers downward in creating the member names. This creates a problem in the vault because of the duplicate file factor.
What I ended up doing was calling up that particular member and doing a file save as then replacing it in the assembly. Then it would check in fine.
Is this the only work around or is there a setting somewhere that allows unique names for these frame members.
View 4 Replies
View Related
Jun 28, 2010
I created a template part, turned it into an I-part and published it successfully as a Frame Member.
The custom member was published into a custom library that is read/write. I was forced to create this library in order to publish the part.
When I go to use the custom profile with the frame generator, I am able to find the custom member in the dialog but when the frame generator tries to generate the part, I get this error message:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for Unnamed GIRT-2 could not be located in the Content Center library.
View 9 Replies
View Related
Dec 30, 2010
I created a structural shape profile for use in a project. It is square tube with radiused corners, very similar to "ANSI/AISC (Rolled Steel) Structural Tubing Square" in the content center, but mine is 1 inch square with 0.065 inch walls.
I've made a chassis out of my custom tubing. When I run a frame analysis on it, I get an error/warning stating that the torsional section modulus is zero, because I didn't fill in the value when I generated the frame. How do I calculate that value?
I've attached the tube that I used to make the structural shape.
View 9 Replies
View Related
Aug 29, 2012
I want to create frame made out of structural steel. In order to do that Invwentor is giving me no option but to make Layout Sketch (any other way?), which then i should use for inserting members. Now, when i want to creat layout it does not give me an option of assigning it to a work planes i created. It always sketches it in default XY plane. I need to create 3D layout that will follow several work planes i created. I tried selecting any of the other work planes before clicking on layout button but no luck.
solidworks 2010
View 4 Replies
View Related
Feb 1, 2012
Im using MEP and in MEP2010 the Offset command worked fine on my structural members, offsetting to the direction I picked.
In MEP2012 the offset command now offsets the same structural member to the opposite side of the point I pick.
The structural member is rolled 180 and the way I can correct this offset issue is to roll the SM back to 0, then the offset command offsets to the correct side.
Is there a new setting or something in 2012 that will get the offset command behaving the way it did in 2010 where it does not care about the objects properties and just offsets it correctly?
View 9 Replies
View Related
Dec 19, 2011
I'm writing some code to create various structural members, but I also need to add the texture map. Since it is doing the creation via VL, I need a way to add a material without that darn dialog box. Can material be add to a member programaticlly?
View 1 Replies
View Related
Jun 24, 2009
While using the frame generator's "Trim - Extend to Face" command on short members, the wrong end of the member is being trimmed. Is there a way to choose which end to trim on short members?
View 9 Replies
View Related
Oct 12, 2012
How to use frame generator in assembly? I find difficult to assemble a huge assembly.
View 1 Replies
View Related
Aug 13, 2013
I'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection".
Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?
View 4 Replies
View Related
Apr 19, 2012
All of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.
Inventor Professional 2014.
Windows 7 64 bit.
View 4 Replies
View Related
Feb 13, 2012
I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.
View 3 Replies
View Related
Aug 6, 2013
Coming from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.
Wondering if there was a solidworks 'end cap' equivalent.
[URL] essentially a weldment driven and generated part which doesn't need much thinking about.
View 1 Replies
View Related
May 20, 2011
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
View 9 Replies
View Related
Dec 23, 2011
Aside of beams and so I could use some metal studs. Seems like there are not any.
View 9 Replies
View Related
