when I have part make with frame generator. I have problem expand tree in drawing.How expand tree in drawing when part make with frame generator.
View 2 RepliesIm using frame generator, i create my skeleton part, start up frame generator, select my frame types and connect them to the lines, press OK, accept the default filenames then get this error:
[WARNING] Frame Generator: Errors occurred during inserting Frame Member(s)
[WARNING] Insertion of frame member(s) failed
[ERROR] A frame member could not be created. The template file for ANSI ANSI AISC (Rectangular) - Flat Bar Steel could not be located in the Content Center library. and no parts are put in the assembly.
I have updated the content centre etc and installed all the latest updates. I have also reinstalled Inventor and The local content centre but the error persists.
Ive included a couple of screen shots that show the error.
frame generator is useless until this is fixed and i need to design some frames.
w7u-64sp1,iv13sp1.1,intel.xeon.e5-2620 0 @2.00 2.00-32gb,gtx560-4gb
I'm slowly getting there with iLogic, so I'm really just looking for the function / call to change one part from Frame Generator, to another part from Frame Generator.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
In the part file I created a table with the 2 different sizes used. I can manipulate the part by editing extrusion 1 and the ribs and slots adjust accordingly. However, I would like to keep track of the wire trough used in a similar fashion as a tube weldment, one part, but multiple lengths used, for BOM tracking.
AS soon as I author the part to structural shapes I get issues with the extrusions and sketches, looks like the initial geometry is lost it's constraints to projected lines. (sketches are full of the pink lines).
If you want to re-use a Frame Generator member in ANOTHER assembly to save creating more files you might want to use copy-paste.If you do then you find you can't delete this member or other ones that have been copy-pasted into that assembly.
Oddly enough if you use "place component" you CAN delete it.I am using Inventor Professional 2014 Service Pack 1 Update 1.
Inventor Pro 2013.
I would like to make the part named "Frame_base" an assembly on its own. see the attachment. I am new to Inventor and I thought I could demote it but the selection is grayed out. The main reason I want to do this is because I would like to create a 2D drawing of it with a parts list to give to the welder. This will be my first drawing and maybe I'm doing this wrong. It appears that I need to bring in the base view file, and I don't see a way to do that unless the frame is its own assembly.
I'm using ilogic rules to customize an assembly generated by content center of frame generator. I would like replace the parts on my assembly when I change an assembly parameter multivalue.
View 4 Replies View RelatedI've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies View RelatedI have a wire trough that we typically use on all our units. Instead of modelling each trough as it's own separate part to length, I would like to add this part to frame generator for tracking there cut lengths etc...
A few items, there is two sizes that we use, but for now I will work with just one.
I have modeled the part and renamed the important parameters.
-WIDTH - stays the same
-HEIGHT - stays the same
-LENGTH - adjusted by frame generator
-RIBS - the part has 6 currently, but there is a rib added for every 1/2 inch. it is a rectangular pattern
-SLOTS - will be added to the trough every 2 inches of length, it is a rectangular pattern
-SLOT_DISTANCE - is 2 inches and never changes, if the trough is cut on a slot, which ever is easiest, to show half a slot or none, doesn't matter, this is just for a visual and BOM reference
I found a video that shows me how to publish parts to FG, but I am stuck for the iLogic part. Part attached.
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I have another issue with Fram Generator drawing BOM;
One of my like components has cutouts in it, making the mass "Varies" between these like components.
Inventor Pro 2012
After creating the desired frame using frame generator, I am creating a detail drawing. When I insert the parts list, the info applied is using the full length of the tubes before it was cut to fit. (to get rid of the over lap edges of the frame)
Attached is the part file used to create the frame. (Can't attached the frame, too big) I used
Also attached is the drawing to clarify the issue.
Total length of the frame is 116.75"
In reality is it made up of 2 short end pieces 23.375" + 2 x for pocket tubes (10") plus the center tube 50"
23.375+23.375+10+10+50=116.75"
Now from my part file, i just made 3 lines for the total length and 2 intersecting lines for the fork pockets. The parts list is using the initial creation length and not the altered cut length? Does this make any sense?
How can I get the parts list to represent values after a cut is done to the tube?
I just upgraded from Inventor 2012 LT to Inventor 2013, and I have to say that I love the new features !
I am now making my frames with the Frame Generator. We usually give to the trade persons a cut list (a drawing of each member of the frame with the dimensions) that goes with the frame. Until now someone is doing it using AutoCAD, but I was wondering if it was possible to make an explode view of a frame on a drawing and add the dimensions.
when I'm in a part file and attempting to open the related drawing file by right clicking on the part name at the top of the design tree, the drawing can't be found automatically and I've to find it in the file open dialogue box.
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
I'm trying to essentially make a mini frame generator in autolisp. Namely a function where one can enter the width, height, thickness, how many bays, how many day light openings, and then autocad draws the frame. Right now I'm just trying to get two settings to work with each other - and upon opening autocad the function works initially but then when I try to switch to the other setting it does not work. I felt like this was a global/local variable issue.
View 9 Replies View RelatedWhile using the frame generator's "Trim - Extend to Face" command on short members, the wrong end of the member is being trimmed. Is there a way to choose which end to trim on short members?
View 9 Replies View RelatedHow to use frame generator in assembly? I find difficult to assemble a huge assembly.
View 1 Replies View RelatedI'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection".
Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?
All of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.
Inventor Professional 2014.
Windows 7 64 bit.
I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.
View 3 Replies View RelatedComing from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.
Wondering if there was a solidworks 'end cap' equivalent.
[URL] essentially a weldment driven and generated part which doesn't need much thinking about.
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
Aside of beams and so I could use some metal studs. Seems like there are not any.
View 9 Replies View RelatedThe frame generator gives the wrong cut length (G_L) when using double end treatment "Trim and Extend to Face"
See attached screen shot: The correct length of the diagonal RHS should be 1852 mm after trimming the RH end to btm and rh member. As far as I remember this is an old problem never been fixed. Is a lot of work manually altering the cut length of 20-30 member in the BOM.
I created a frame using 150 x 75 BS4 channel section in 2011/12 (can't remember which) however it was created before the BOM length fix (all lengths stated are not necessarily the lengths of the beams). In order to fix this I need to redraw the frame, which is fair enough, however I am unable to find the BSI standard channel section. In fact, BSI has seemed to vanish from my library completely, I can not even place a component from the BSI library.
I have had a look around the C:/Programdata/autodesk/inventor2011(or 12 or 13)/contenetcentre/libraries and have found parker, gost, DIN etc but no BSI. I have not used the frame generator/place component in 2013 yet so no idea if this was from install or not.
My skeleton has lost translation with my frame generator and has offset the sketch. I have tried "Edit with Frame Generator" but the peices seem to stay in place.
View 4 Replies View RelatedI have been playing around with Inventor (moving across from Solidworks) and am wondering how I 'detail plates' I am becomeing familiar with the Frame Generator to create all of my members, but it seems quite disconnected in the creation process create a plate.
I currently am creating the 3D sketch (in a part) creating the (base) plate in the same part and then in the assebley I am using the frame Generator (See image) to create the members.
How to correctly include the plates as part of the design process.
Is there any way in standard inventor to find what sketch is related to a frame generator member?
View 6 Replies View RelatedI`ve modelled a pipe and would like to know if this type of pipe can be added to the content centre so as i can use with the frame generator?
View 5 Replies View RelatedHow do you have the frame generator "point" to a custom parts directory to create from?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010