AutoCAD Inventor :: Frame Generator Report

Jun 12, 2012

Is there any way in standard inventor to find what sketch is related to a frame generator member?

View 6 Replies


ADVERTISEMENT

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

May 22, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?

View 2 Replies View Related

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

Apr 30, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?

Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB

View 2 Replies View Related

AutoCAD Inventor :: Using Frame Generator

Jun 24, 2009

While using the frame generator's "Trim - Extend to Face" command on short members, the wrong end of the member is being trimmed. Is there a way to choose which end to trim on short members?

View 9 Replies View Related

AutoCAD Inventor :: How To Use Frame Generator

Oct 12, 2012

How to use frame generator in assembly? I find difficult to assemble a huge assembly.

View 1 Replies View Related

AutoCAD Inventor :: DIN H-Beams In Frame Generator

Aug 13, 2013

I'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection". 

Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?

View 4 Replies View Related

AutoCAD Inventor :: Frame Generator Disappeared?

Apr 19, 2012

All of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.

Inventor Professional 2014.
Windows 7 64 bit.

View 4 Replies View Related

AutoCAD Inventor :: Frame Generator Error

Feb 13, 2012

I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.

View 3 Replies View Related

AutoCAD Inventor :: End Cap Button For Frame Generator?

Aug 6, 2013

Coming from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.

Wondering if there was a solidworks 'end cap' equivalent.  

[URL] essentially a weldment driven and generated part which doesn't need much thinking about.

View 1 Replies View Related

AutoCAD Inventor :: Using Frame Generator And Vault

May 20, 2011

It seems to me that there is a major disconnect between using the Vault and using Frame Generator.  When creating a frame using frame generator all the parts are automatically named by frame generator.  It gives you a name such ANSI W8x13 00000001 for an I-beam for instance.  As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc.  After I'm finished with the assembly I will check it into the vault.

The issue comes up when I go to create a new assembly a few days later using the same I-beam.  The naming convention for the I-beam is exactly the same for the new assembly file.  It will start over and give me a new ANSI W8x13 00000001 file.  Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing.  It seems crazy that Inventor would be set up this way considering how vault works.  The only thing I have found is that you can click the browse button and rename the file.  This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate.  And lets just say it's not hard for me to create 100+ new parts a day using frame generator. 

View 9 Replies View Related

AutoCAD Inventor :: No Studs In Frame Generator?

Dec 23, 2011

Aside of beams and so I could use some metal studs. Seems like there are not any.

View 9 Replies View Related

AutoCAD Inventor :: Frame Generator Cut Length

Mar 6, 2013

The frame generator gives the wrong cut length (G_L) when using double end treatment "Trim and Extend to Face"

See attached screen shot: The correct length of the diagonal RHS should be 1852 mm after trimming the RH end to btm and rh member. As far as I remember this is an old problem never been fixed. Is a lot of work manually altering the cut length of 20-30 member in the BOM.

View 9 Replies View Related

AutoCAD Inventor :: Frame Generator BSI Standard

May 9, 2012

I created a frame using 150 x 75 BS4 channel section in 2011/12 (can't remember which) however it was created before the BOM length fix (all lengths stated are not necessarily the lengths of the beams). In order to fix this I need to redraw the frame, which is fair enough, however I am unable to find the BSI standard channel section. In fact, BSI has seemed to vanish from my library completely, I can not even place a component from the BSI library.

I have had a look around the C:/Programdata/autodesk/inventor2011(or 12 or 13)/contenetcentre/libraries and have found parker, gost, DIN etc but no BSI. I have not used the frame generator/place component in 2013 yet so no idea if this was from install or not.

View 1 Replies View Related

AutoCAD Inventor :: Edit With Frame Generator

Oct 30, 2012

My skeleton has lost translation with my frame generator and has offset the sketch. I have tried "Edit with Frame Generator" but the peices seem to stay in place.

View 4 Replies View Related

AutoCAD Inventor :: Frame Generator For Plates

Oct 7, 2012

I have been playing around with Inventor (moving across from Solidworks) and am wondering how I 'detail plates' I am becomeing familiar with the Frame Generator to create all of my members, but it seems quite disconnected in the creation process create a plate.

I currently am creating the 3D sketch (in a part) creating the (base) plate in the same part and then in the assebley I am using the frame Generator (See image) to create the members.

How to correctly include the plates as part of the design process.

View 4 Replies View Related

AutoCAD Inventor :: Pipe To Use With Frame Generator

Feb 15, 2012

I`ve modelled a pipe and would like to know if this type of pipe can be added to the content centre so as i can use with the frame generator?

View 5 Replies View Related

AutoCAD Inventor :: Custom Lib For Frame Generator

Oct 6, 2011

How do you have the frame generator "point" to a custom parts directory to create from?

win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010

View 1 Replies View Related

AutoCAD Inventor :: Subassemblies In Frame Generator

Mar 14, 2012

Can i use frame generator and do subassembly using one of the member and still be able to stretch the frame?

will the subassembly stretch as well?

inventor 2011
vault 2012

View 1 Replies View Related

AutoCAD Inventor :: Frame Generator WorkFlow

Sep 8, 2011

Recently the company bought a single license of Inventor to test out and see if it meets our company goals and is efficient to use for what we do.  I've been working with the frame generator, which is fairly easy to use and make the initial assembly, but I am having trouble and breaking out individual sections to detail. 

I am stuck with using LOD for this platform, provide a general workflow procedure of the best way of creating assemblies and subassemblies. 

What I am currently using Inventor is to build a condenser platform. Generally we like to weld as much of it in the shop before it goes to the field for final assembly.  The platform consists of beam supports, grating, stairs, and handrail. In this case we would generally take sections of the handrail and weld in the shop, we would also have the stairs with the handrail welded on it as well. I would like to refrain from converting this to weldment.

I have tried promoting and demoting but this loses constraints and references. Also I cannot create a single skeleton of the whole frame at one time because a lot of the frame members depend on the other members structural sizes (flange width, height, etc.).

I've read of people creating multiple subassemblies and grounding them, but I would like to think that their has to be away that I could just build off of the base skeleton and not have to cycle through different assemblies.

View 9 Replies View Related

AutoCAD Inventor :: Frame Generator Custom Profiles

Sep 18, 2013

I'm trying to find out whether I can create custom frame generator profiles in IV2014.  Any solutions that I've come across aren't viable (referencing files that don't exist on my machine etc). 

View 4 Replies View Related

AutoCAD Inventor :: Frame Generator Parts Rotating

Apr 2, 2012

What would cause my frame generator parts to rotate when I change a completely different part on my frame. they seem to be off by a very small amount. they seem to rotate everytime a change something else in the frame and can change them to be correct.. I believe my main sketch is constrained.

inventor pro 2012
windows 7 64 bit.
Dell t1500 i7 8 gb ram
ati firepro v4800

View 1 Replies View Related

AutoCAD Inventor :: Frame Generator Drawing BOM - Varies

Mar 2, 2012

I have another issue with Fram Generator drawing BOM;

One of my like components has cutouts in it, making the mass "Varies" between these like components.

View 9 Replies View Related

AutoCAD Inventor :: Different Material Appearance In The Frame Generator

May 9, 2013

I have problems with material appearance in the frame generator. I have created a new material 316 stainless steel and assigned a specific colour to it. I have now decided to change that colour but it only changes when I change the material in iProperties of the part. I still get the old colour when I use the frame generator to change the material. The only way to change the colour of my material is thru the appearance tab in the frame generator pop up window. 

View 4 Replies View Related

AutoCAD Inventor :: Cannot Install Frame Generator Hotfix

Nov 4, 2011

When trying to install the latest Hotfix for Frame Generator, I receive an error message, "

Internal Error 2902. ixfAssemblyCopy". This hotifx will correct the length change display in the Bill of Material.  It seems this error may be cause by "Windows Installer".  I have Inventor 2010 SP1 installed and have had no problem in installing other patches and hotfixes.  What makes this one different?

View 5 Replies View Related

AutoCAD Inventor :: Use Custom Library In Frame Generator?

Jan 26, 2012

My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen.  I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.

I saved a copy of a pipe family to "My Library" and made it an independant family.

View 1 Replies View Related

AutoCAD Inventor :: Merge Members With Frame Generator

Aug 6, 2013

I've created a frame out of tubular steel using frame generator.  When specifying sketch lines for the members, i indadvertently selected two adjacent, co linear members, instead of going from point to point.

i.e. frame members are A to B and B to C  - what I am after is a frame member from A to C.

I want to merge the two, to have a continuous piece of steel, however i'm afraid that deleting them both and replacing will delete mates which i have in place to each of their faces.

View 1 Replies View Related

AutoCAD Inventor :: Frame Generator - Applying End Treatments

Aug 26, 2010

I'm working on a project that has a LOT of structural steel so I've been using Frame Generator a LOT.  At first, the delay I got when applying an end treatment to the structural members was no big deal.  Hundreds and hundreds of trim / notch treatments later, the 6 to 9 second delay each time I perform it is about to drive me crazy.  The trim/extend function lets me select a large number of members to trim to a single face, which is great.  The notch function, however, has to be done one at a time.  I have buttons programmed on my SpacePilot and mouse to reduce the number of mouse clicks, but once I click OK, there is always a long pause before the treatment is applied.

My system specs are listed below.

Product Design Suite Ultimate 2013 - Build: 138, Release: 2013 RTM
Windows 7 Professional - 64 bit - SP1
Quad-Core Intel® Xeon X5482 3.2 GHz
16 Gb RAM
Two - nVidia® Quadro FX 3700 - Driver: 9.18.13.593 - Date: 8/18/2012
SpacePilot - rv:3.15.6 / dv 6.15.6 / fv 3.12

View 6 Replies View Related

AutoCAD Inventor :: Drawing Of Frame Generator Model

Nov 8, 2012

Inventor Pro 2012

After creating the desired frame using frame generator, I am creating a detail drawing. When I insert the parts list, the info applied is using the full length of the tubes before it was cut to fit. (to get rid of the over lap edges of the frame)

Attached is the part file used to create the frame. (Can't attached the frame, too big) I used

Also attached is the drawing to clarify the issue.

Total length of the frame is 116.75"

In reality is it made up of 2 short end pieces 23.375" +   2 x for pocket tubes (10") plus the center tube  50"

23.375+23.375+10+10+50=116.75"

Now from my part file, i just made 3 lines for the total length and 2 intersecting lines for the fork pockets. The parts list is using the initial creation length and not the altered cut length? Does this make any sense?

How can I get the parts list to represent values after a cut is done to the tube?

View 4 Replies View Related

AutoCAD Inventor :: Unit Qty Varies In BOM From Frame Generator

Jul 11, 2013

In particular item 29 - same part number, exactly the same parameters (I checked them one by one), but a "Varies" for Unit Qty.It is a truss frame, and item 29, as many others, has "trim to frame" end treatments.

View 1 Replies View Related

AutoCAD Inventor :: Sketch Constrains In Frame Generator?

May 21, 2012

I get these pink points in my sketch for the frame. How do I get rid of them? 

Right click and delete doesn't work. I get all sorts of errors because of these. 

View 9 Replies View Related

AutoCAD Inventor :: Frame Generator Member Offset

Dec 19, 2013

I have created a user parameter in a assembly, then creating a member with FG i use that parameter as member offset. The same with other members.

Changing from Parameters that parameter no update happen, I have tried rebuild all, refresh..no working. The only thing that works, is to use the "change" command , select my member(s) , change nothing, than ok.

Then it update.

Is it a software limit? A bug? An error in the workflow? 

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved