In particular item 29 - same part number, exactly the same parameters (I checked them one by one), but a "Varies" for Unit Qty.It is a truss frame, and item 29, as many others, has "trim to frame" end treatments.
View 1 RepliesI have another issue with Fram Generator drawing BOM;
One of my like components has cutouts in it, making the mass "Varies" between these like components.
I've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies View RelatedWhen I add a profile to Custom Centre to be used in a frame generator, in Base Qty by default it comes up as in, I want it Each. Where to change it?
View 1 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies View RelatedAfter using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
Autodesk Inventor 2010 - How do I set default for "use standards notation" to off or unchecked in the "Edit Unit Attributes" dialog box for feature control frames? I want to do this because the Feature Control Frame style unit setting does not override it as I believe it should. This causes an extra value within the tolerance box of the feature control frame if the Standard General units differ from the style’s primary units.
View 1 Replies View RelatedWhile using the frame generator's "Trim - Extend to Face" command on short members, the wrong end of the member is being trimmed. Is there a way to choose which end to trim on short members?
View 9 Replies View RelatedHow to use frame generator in assembly? I find difficult to assemble a huge assembly.
View 1 Replies View RelatedI'm running Inventor 2013 professional and I want to design a steel structure for stress analysis. But I can't find any DIN H-beams (HEB, HEA in accordance to DIN 1025) in the "insert frame member selection".
Isn't it possible to use DIN H-beams in Inventor frame generator? Can I add my own parts to the library for stress analysis?
All of a sudden I can't get up my frame generator. I click into my frame > hit "insert frame", which is normally where the dialog box comes up, but I get nothing.
Inventor Professional 2014.
Windows 7 64 bit.
I just recently had Inventor 2012 installed on my computer and I went to make a frame generator and an error message popped up and won't let me make the generator. I attached a .jpeg to this that shows what error keeps appearing.
View 3 Replies View RelatedComing from a solidworks background, i frequently use weldments, or Inventor's equivalent - frame generator.
Wondering if there was a solidworks 'end cap' equivalent.
[URL] essentially a weldment driven and generated part which doesn't need much thinking about.
It seems to me that there is a major disconnect between using the Vault and using Frame Generator. When creating a frame using frame generator all the parts are automatically named by frame generator. It gives you a name such ANSI W8x13 00000001 for an I-beam for instance. As you create more components (I-beams in this case) the number on the end of the file name increases so you have 0000002, 00000003 etc. After I'm finished with the assembly I will check it into the vault.
The issue comes up when I go to create a new assembly a few days later using the same I-beam. The naming convention for the I-beam is exactly the same for the new assembly file. It will start over and give me a new ANSI W8x13 00000001 file. Now when I go to check it into the vault I get the "cannot check in due to vaulting restrictions" error because the two files have been named the exact same thing. It seems crazy that Inventor would be set up this way considering how vault works. The only thing I have found is that you can click the browse button and rename the file. This is a serious headache though because I have to come up with a unique name (or pre-fix) for EVERY part of EVERY frame that I generate. And lets just say it's not hard for me to create 100+ new parts a day using frame generator.
Aside of beams and so I could use some metal studs. Seems like there are not any.
View 9 Replies View RelatedThe frame generator gives the wrong cut length (G_L) when using double end treatment "Trim and Extend to Face"
See attached screen shot: The correct length of the diagonal RHS should be 1852 mm after trimming the RH end to btm and rh member. As far as I remember this is an old problem never been fixed. Is a lot of work manually altering the cut length of 20-30 member in the BOM.
I created a frame using 150 x 75 BS4 channel section in 2011/12 (can't remember which) however it was created before the BOM length fix (all lengths stated are not necessarily the lengths of the beams). In order to fix this I need to redraw the frame, which is fair enough, however I am unable to find the BSI standard channel section. In fact, BSI has seemed to vanish from my library completely, I can not even place a component from the BSI library.
I have had a look around the C:/Programdata/autodesk/inventor2011(or 12 or 13)/contenetcentre/libraries and have found parker, gost, DIN etc but no BSI. I have not used the frame generator/place component in 2013 yet so no idea if this was from install or not.
My skeleton has lost translation with my frame generator and has offset the sketch. I have tried "Edit with Frame Generator" but the peices seem to stay in place.
View 4 Replies View RelatedI have been playing around with Inventor (moving across from Solidworks) and am wondering how I 'detail plates' I am becomeing familiar with the Frame Generator to create all of my members, but it seems quite disconnected in the creation process create a plate.
I currently am creating the 3D sketch (in a part) creating the (base) plate in the same part and then in the assebley I am using the frame Generator (See image) to create the members.
How to correctly include the plates as part of the design process.
Is there any way in standard inventor to find what sketch is related to a frame generator member?
View 6 Replies View RelatedI`ve modelled a pipe and would like to know if this type of pipe can be added to the content centre so as i can use with the frame generator?
View 5 Replies View RelatedHow do you have the frame generator "point" to a custom parts directory to create from?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
Can i use frame generator and do subassembly using one of the member and still be able to stretch the frame?
will the subassembly stretch as well?
inventor 2011
vault 2012
Recently the company bought a single license of Inventor to test out and see if it meets our company goals and is efficient to use for what we do. I've been working with the frame generator, which is fairly easy to use and make the initial assembly, but I am having trouble and breaking out individual sections to detail.
I am stuck with using LOD for this platform, provide a general workflow procedure of the best way of creating assemblies and subassemblies.
What I am currently using Inventor is to build a condenser platform. Generally we like to weld as much of it in the shop before it goes to the field for final assembly. The platform consists of beam supports, grating, stairs, and handrail. In this case we would generally take sections of the handrail and weld in the shop, we would also have the stairs with the handrail welded on it as well. I would like to refrain from converting this to weldment.
I have tried promoting and demoting but this loses constraints and references. Also I cannot create a single skeleton of the whole frame at one time because a lot of the frame members depend on the other members structural sizes (flange width, height, etc.).
I've read of people creating multiple subassemblies and grounding them, but I would like to think that their has to be away that I could just build off of the base skeleton and not have to cycle through different assemblies.
I'm trying to find out whether I can create custom frame generator profiles in IV2014. Any solutions that I've come across aren't viable (referencing files that don't exist on my machine etc).
View 4 Replies View RelatedWhat would cause my frame generator parts to rotate when I change a completely different part on my frame. they seem to be off by a very small amount. they seem to rotate everytime a change something else in the frame and can change them to be correct.. I believe my main sketch is constrained.
inventor pro 2012
windows 7 64 bit.
Dell t1500 i7 8 gb ram
ati firepro v4800
I have problems with material appearance in the frame generator. I have created a new material 316 stainless steel and assigned a specific colour to it. I have now decided to change that colour but it only changes when I change the material in iProperties of the part. I still get the old colour when I use the frame generator to change the material. The only way to change the colour of my material is thru the appearance tab in the frame generator pop up window.
View 4 Replies View RelatedWhen trying to install the latest Hotfix for Frame Generator, I receive an error message, "
Internal Error 2902. ixfAssemblyCopy". This hotifx will correct the length change display in the Bill of Material. It seems this error may be cause by "Windows Installer". I have Inventor 2010 SP1 installed and have had no problem in installing other patches and hotfixes. What makes this one different?
My custom library works fine when I try to insert a part from content center, but when I try to use frame generator my library is not seen. I set the "Standard Organization" and "Standard" family property fields both to "DYNA" hoping that standard would show up in the frame generator "Standard" drop down menu but it doesn't.
I saved a copy of a pipe family to "My Library" and made it an independant family.
I've created a frame out of tubular steel using frame generator. When specifying sketch lines for the members, i indadvertently selected two adjacent, co linear members, instead of going from point to point.
i.e. frame members are A to B and B to C - what I am after is a frame member from A to C.
I want to merge the two, to have a continuous piece of steel, however i'm afraid that deleting them both and replacing will delete mates which i have in place to each of their faces.
I'm working on a project that has a LOT of structural steel so I've been using Frame Generator a LOT. At first, the delay I got when applying an end treatment to the structural members was no big deal. Hundreds and hundreds of trim / notch treatments later, the 6 to 9 second delay each time I perform it is about to drive me crazy. The trim/extend function lets me select a large number of members to trim to a single face, which is great. The notch function, however, has to be done one at a time. I have buttons programmed on my SpacePilot and mouse to reduce the number of mouse clicks, but once I click OK, there is always a long pause before the treatment is applied.
My system specs are listed below.
Product Design Suite Ultimate 2013 - Build: 138, Release: 2013 RTM
Windows 7 Professional - 64 bit - SP1
Quad-Core Intel® Xeon X5482 3.2 GHz
16 Gb RAM
Two - nVidia® Quadro FX 3700 - Driver: 9.18.13.593 - Date: 8/18/2012
SpacePilot - rv:3.15.6 / dv 6.15.6 / fv 3.12