i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
I have completed a part file with a family table defined in it. I check this part into vault. When I search for this part in vault it seems like it has taken the part number and the description from the first line in the family table and assigned it to the main part file. To me this is confusing because it looks like there are two items that are the same.
View 2 Replies View Related am trying to edit Family table as per my requirement. In the family table editor, the columns for " Sectional area, Moment of Inertia, Section modulus etc...." are available. These kind of properties have to update manually or there is any option available to generate autmatically ?
Find the attached image for more clarity !!!
Inventor Professional Suite 2010
Windows 7
Just for kicks, make a lot of changes to a Content Center family table, and then accidentally hit the ESC key, thinking it will back you out of what you are typing.
But seriously, ESC while editing any field of a CC family table, EXITS the editor, losing anything you've typed in up to that point. URL....
When creating new category, there's Parameter tab for creating new parameters. Now when publishing iPart, created category parameters must be mapped to family table columns. But why? What are they used for?
View 1 Replies View RelatedInventor 2012
Can equations like this cell equals this cell be used in the Ipart or Iassembly family tables?
I have created a new colum in family table editor for a custom part in content center. After that i created an assembly using the same custom part from contentr center. Then i prepared the drawing for that i mean *.idw. In the drawing file i have to attach a part list. and i need to add the the new colum generated in family table to part list.Do we have any option available to add the specified column in part list ?
Inventor Professional Suite 2010
Windows 7
After editing a value in the Family Table in the Content Center Editor I still get the old value. I tried to refresh this Content Center part (as administrator) but without succes.
In the logfile the error message is: "Failed: Unable to create part file. Unknown error."
Earlier (probably with older version of Inventor) I was able to refresh.
Is this a bug, or has this something to do with false settings
Autodesk Inventor Product Design Suite 2013 SP1.1
I have recently modified the CC of a part family so that different materials for the same part can be chosen. When I exit the editor and place the component I can see the choice of the materials in the dialog box - no problems (See 1st attachment" But when I go to another users PC they cannot see any of the new materials in the "Place content center" dialog box!?!
For information, we are running Inv. 2011 with Vault Professional 2012
The CC libraries are stored on the server and we have one custom library to which I have publish the modified part family.
The custom CC has been fully synchronised with the Vault server.
The materials.xml containing the new materials used in the part family has been downloaded to the users local workspace.
Inventor 2014 Pro SP1, Vault 2014 Pro SP1
Windows 7, 64-bit
Intel Xeon 3.6GHz
32GB
Nvidia Quadro 4000
I am trying to give an Expression like sqrt({Jx}/{Section}) in column properties in family table editor. but its not working.
Find the attached image .....
Inventor Professional Suite 2010
Windows 7
I have a rule in the .idw drawing template, that displays a dialog box asking for the size (A, B, C, D...). Once the size is selected, it displays the appropriate border and title block. There is a small & large title block, so an A or B size gets the small, and a C or larger gets the large. This works great.
My question is, how can I have the appropriately sized Revision Table (small or large), automatically ready for use, based on the drawing size? The (2) Revision Tables are defined in the Styles library.
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
to change appearance of the sizes in the sketch Image
View 9 Replies View RelatedI need to change the Base Quantity of family templates in CC from GL = ... to Each. (I know there are several different qty, but I need this to Each because of ERP-system).
I use open from CC and place a tube in an iam, and changing BOM-settings to Each on that tube. Then I replace template in the family in CC editor with this file. And everything seems OK.
When I use "Place from CC" and place a tube from this family, everything is in perfect order. The ipt has Base Quantity set to Each just like I wanted.
I use Frame Generator and insert tubes from this family, then the Base Quantity "bounce" back from Each of GL = ...
I need this to work also in Frame Generator.
When I paste data from excel into autocad as 'autocad entities'(paste special) the newly created autocad table does not adhere to the pre-defined table style. Even if I right click on the table and remove overides the text sizes are wrong. I suspect it might be related to some variable, but I don't know which one.
View 4 Replies View RelatedThe hole table has a column named description, but in that column i want to change the defaults for the thread, i don't need the thread class, for example.
I can add or remove thread properties to the table, but i don't want to, i want to use the general Description column, which describes not only threads.
I am creating a custom table in a .idw through VB. I was looking for the code that would tell it to make a column have units formattng. For example, instead of my thickness to be 0.5, I want it to show 1/2 in. I know you can do this manually in the table editor, but I cannot find any bits of code that will do it in VB automatically.
View 1 Replies View RelatedWe are using Inventor and Vault pro 2013.
I have an iPart in which I want to change the File Name Column from "Member" to "Part Number". These columns are not the same and makes the filenames for the members different when generated.
The challenge is that I already have about 100 members generated and used in different assemblies. I want these to be replaced by the new files and be deleted.
If I change the File Name Column I will get 100 new files (ipart members) that is not used anywhere. The only way I know of to replace the 100 "old" members is to do this in Vault - one by one..
How can i change the radius og the command fillet in autocad mechanical 2011?
View 2 Replies View RelatedWhy the hole chart has commas instead of decimal points I don't know but how to change them?
View 5 Replies View RelatedWhen you make a custom table in VB.net, adding in the Row Height property in the custom table create line only changes the data cell row heights, not the title cells or the header cell. How do yo do set the title/header cell row heights ?
Dim oRowHeights_FS(11) As DoubleoRowHeights_FS(0) = 0.6oRowHeights_FS(1) = 0.6oRowHeights_FS(2) = 0.6oRowHeights_FS(3) = 0.6oRowHeights_FS(4) = 0.6oRowHeights_FS(5) = 0.6oRowHeights_FS(6) = 0.6oRowHeights_FS(7) = 0.6oRowHeights_FS(8) = 0.6oRowHeights_FS(9) = 0.6oRowHeights_FS(10) = 0.6oRowHeights_FS(11) = 0.6Dim position_FrameShear As Point2d = _invApp.TransientGeometry.CreatePoint2d((oInvSheet.Border.RangeBox.MinPoint.X + 16), (oInvSheet.Border.RangeBox.MaxPoint.Y))Dim oCustomTable_FrameShear As CustomTableoCustomTable_FrameShear = oInvSheet.CustomTables.Add(vValue_FrameType & " " & vValue_Hand & " Frame Shear List", position_FrameShear, 6, 12, oTitles_FrameShear, oContents_FrameShear, oColumnWidths_FrameShear, oRowHeights_FS)
a customer has a title block with a revision table ( standard vault revision table) add on top of it.
If you change the sheet size the revision table remains his position.
If found the way to reposition the table with a ilogic rule.:
'point afstand in cm
PointX=(ActiveSheet.Width/10)-13
PointY=5.5
'punt vanaf rechtonder gemeten in cm
[Code]....
This is working perfectly. But now the challange how to trigger this rule to run if you change the sheet size?
if tried:
trigger=Activesheet.size
or
to create a userparameter and added this line in my rule : Size=ActiveSheet.size, normaly is you change parameters it triggers the rule to rule. but both way didn't work.
Can event triggers from the API be used? Do i need the "Onchange" event? Any example for a ilogic rule?
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
I've changed the main tool bar text size in Windows 7 control panel, but the flyout text in Modify for example is still too small, how do I alter that?
View 5 Replies View RelatedI have remodeled a part I was working on previously, but now an edge doesn't want to fillet, as it was on the old model ( in the top right corner )..
View 2 Replies View RelatedTrying to change the printable area of custom paper sizes?
I've plotter that allows me to create 5 custom paper sizes for each pc3 file, however after create them, i cant always access to change their printable area, you know adjusting their margins, and the strange thing is that this error doesn’t happen all the time,sometimes after a while trying they work, but just for a couple of times, after that the problem remains.
autocad.png
To be more clear, you can see on the image that it doesn’t recognize the custom paper size i have selected, however it works from time to time, allowing me to edit those margins, and after save them, they work just fine and i can use those paper sizes with no problems.
I've tried to edit the pc3 file through windows, and a message appears saying that an unknown error has occurred.
I am working on creating various standard sized window elevations using dynamic blocks. Each window elevation needs to have text underneath it that tells you the unit size of the window. While I have successfully created all the various elevations using dynamic blocks I can't figure out how to make the text appear to change with the various window unit sizes. for instance I have a small window that has text underneath showing 1818 (18"wide x 18"high). I need text to change to say 1820, 1824, 1830, etc. I can get the 1818 text to stay centered under the elevation as the window gets wider/higher but that is it.
View 9 Replies View RelatedI am working on my project at home and I am having some problems with the fillet tool.
Attached is a picture of my problem with what it is doing.
I am trying to fillet A to E and E to C (B to D and D to F also)
On the left hand side when I fillet, it connects C to E instead of A to C and I do not know why it is doing that or what I am doing wrong.
How do i make the 3mm fillet go in the other direction.When i apply the fillets to the top of the pipes it goes inwards but i want the fillet to go outwards.(like a weld - i don`t want to weld though just use a fillet).
View 1 Replies View RelatedIs there a way to create smooth transitions for fillet welds for around corners?I have to create four separate fillet welds on all sides of the mating pieces and it breaks at the corners.
View 2 Replies View RelatedWhat kind of fillet i need for relax the edges in a eccentric reducer pipes's fitting, i can use fillet of faces for the sircular edge smaller , but am in troubles with the bigger .
View 1 Replies View Related