When I paste data from excel into autocad as 'autocad entities'(paste special) the newly created autocad table does not adhere to the pre-defined table style. Even if I right click on the table and remove overides the text sizes are wrong. I suspect it might be related to some variable, but I don't know which one.
View 4 RepliesNo documentation : remove all property overrides
If I insert a table with our standard table style is is to big, so made a smaller text style, made a new table style with the new text style in it.
And if I insert a new table with the new style its still big...
But... select the table, right click, Remove All Property Overrides... And the text style is OK, only the row height is wrong, so in the table bar - unlocked, select the table again and move the right little triangle up until the rows don't get smaller.
Is there a way to remove all local overrides in the entire book rather than one spread at a time?
View 12 Replies View RelatedI am having trouble with Lightroom 5 exporting images at incorrect file sizes. For example, if I use my export preset for images with long edge 2500 pixels and maximum size 1000k it is exporting images at 1500-2500k.
View 7 Replies View Relatedi am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
Is there a quick way of finding all dimensions with a text override.
I am dimensioning screwed pipe, and want the cut length on the drawing, e.g. a pipe that is 3000mm between center of fitting should show a dimension of 2970. After doing this on a few hundred dimensions I want to check that I have not left any out. i therefore want to check if there is any way to check that they are all overridden.
I just got back a submittal package from a customer. Many markups because of incorrect dimension callout for a certain fit. When I dimensioned the drawing, I used the limit/fit calculator that is with Inventor. Now I just compared this calculator with the ANSI B4.1-1976 standard that it is supposed to follow. What I found was that the values in Inventor are wrong.
I just checked a few sizes and they do not match the ANSI standard. Not sure it there are other fits that have errors in them, but I will bet there are. Does Autodesk realize that if this information is put out, we have to take it as gospel. I don't have the time to check every-little-stinking dimension. If the dims in the table is wrong, I might as well type them in myself and forget about using the table.
Here is a screen shot of some of the errrors that I found. I also checked this size range for RC3, RC4 and RC5. They all have errors in them too. I am sure there are more, just dont have the time to check. We are not talking about "Freeware" here...
We have a Visual Basic Script that creates pie charts using Adobe Illustrator along with an internally created app called Chart Generator. An xml file that contains a markup for a set of pie charts is imported into Chart generator and by using Illustrator it generates all of the pie charts and saves them as individual eps files.
It was recently discovered that not all of the pie slices are proportioning correctly. In some cases a slice that is 10% of the pie appears larger than a slice that is 13% of the pie. We can’t determine a pattern that might be causing this issue. We think that the problem is in the Visual Basic coding.
I have a rule in the .idw drawing template, that displays a dialog box asking for the size (A, B, C, D...). Once the size is selected, it displays the appropriate border and title block. There is a small & large title block, so an A or B size gets the small, and a C or larger gets the large. This works great.
My question is, how can I have the appropriately sized Revision Table (small or large), automatically ready for use, based on the drawing size? The (2) Revision Tables are defined in the Styles library.
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
We have a whole bunch of spreadsheets that we use for calculations and parts of those spreadsheets are linked to a ton of CAD Drawings via data links.
We would like to be able to deliver the CAD drawings to the client without having to send our calculation books (just the output tables). In other words, is it possible to embed the table data and remove the excel link for the final delivery?
Is there a way to force the table and table text height to stay constant despite the scale? I can do it for Point Label Styles with an Expression. But in 2011 there is no way to build an expression for a table style.
I want to create tables in the drawing where the points are and then plot them from a drawing they're Xrefed in to. The tables are too small but zooming in doesn't make them any bigger because the scale of the viewport changes and they adjust.
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies View RelatedI have the right click on autocad for repeat the last command.
when i launch my prog. --> the prog show a form with a datagridview. I have added a contextMenuStrip in this datagridview.
SO when i launch the prog with the right click (repeat last command) the form show and the contextmenustrip too. (if the mouse is on the datagrid.)
How i can cancel or purge the event mouse right click ?
Working in AutoCAD™ 2012... Is there a way to "erase" an entity, line, etc. by selecting it and having it immediately disappear? I work in 3D/DXB files a lot and it really useful when working with an audience either for on-screen seminars or over-the-shoulder.
View 9 Replies View RelatedIs there a way to setup vertical alignment of text in a cell for the entire table, when using Table Tool? It is possible for a single cell, but when selecting a table (or multiple cells) this option is not available.
View 5 Replies View RelatedI create a sdf file and add a squema for non feature class, for association with an existing feature class squema property.
But the table is empty andlocked with no chance of adding values. Since it has no geometry, how can I put some rows on it.
I try to import using bulk copy, but then I cant remove or add rows.
How can I insert values in a sdf table?
I created a dynamic block of signatures when i was messing around with dynamic blocks and have been using it since. i have to update this dynamic block and add another signature to it but for the life of me i cannot remember how to add/remove from the lookup table. i added the name to the visibility table i just cant remember how to edit the lookup table ?
View 1 Replies View RelatedI've spent some time designing a chart using the table tool. Now I want to adjust some column widths and add some text.
However, the mouse keeps trailing a small table icon, and all it will let me do is insert another table. I can't enter text, or highlight a row or column, for example. Most of the right mouse click options are greyed out.
How do I change from this mode for the mouse, with the Table icon switched on, to other modes where I can do other things with the table I have already created?(If I create a new table below this existing table, all is well. However, I can't grab the content in the earlier table to paste it into the new one.)
I'm looking for an autocad text size chart. . . Where I could obtain this information?
View 2 Replies View RelatedI am trying to load multiple Text Sizes into AutoCAD Civil 3D 2012 so that I can have a list of the standard text sizes (3/32", 3/16", 1/4", 3/8") to choose from the Annotation tab > Text Group > Annotation Text Height drop down list, instead of having to type them in each time.
At first I thought that I could just add the different text sizes using the TEXTSIZE variable command into my drawing template file, but apparently the Text Sizes entered are only retained for that particular session of AutoCAD Civil 3D. Is there perhaps some other system variable that controls this setting being retained for more than one session??
Then I thought I could just create a program to load the sizes. I originally tried creating a C# .NET program to load the text sizes, but ran into a problem. I then I tried creating another version of a C# program, as well as an AutoLISP script, thinking that it was perhaps some limitation to my approach (which still may be the case). But I still keep running into the same problem. The problem is that only the last text size specified is actually entered into the list of available text sizes. The other text size values appear to be processed but are not retained in the Annotation Text Height drop down list.
The following is my first attempt with C#:
using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.Runtime;
public class CreateTextSizes : Autodesk.AutoCAD.Runtime.IExtensionApplication
{
public void Initialize()
{
// Create following Text Sizes: 0.09375 (3/32"), 0.1975 (3/16"), 0.25 (1/4"), 0.375 (3/8")
[code].....
The following is my attempt with AutoLISP:
(defun c:LOADTEXTSIZES()
(Command "TEXTSIZE" 0.09375)
(Command "TEXTSIZE" 0.1975)
(Command "TEXTSIZE" 0.025)
(Command "TEXTSIZE" 0.375)
(Command "TEXTSIZE" 0.09375)
)
We have a client whom insists on 1/8" text and my blocks are all sized for 3/32". What I wanted to do is create two visibility states for the block. One using the 1/8" text and one using the 3/32" and be able to switch between them. I can get the border of the tag to work, but the text doesn't switch sizes.
Is this even possible? Is there a better way to deal with all my tags and needing to have two different versions of them? (Tags such as fixture tags, note tags, etc...)
I've changed the main tool bar text size in Windows 7 control panel, but the flyout text in Modify for example is still too small, how do I alter that?
View 5 Replies View RelatedHow do I remove "Open with Corel Paintshop Pro X4" from the right click context menu in explorer? I have one for every version I have installed and it makes the right click menu toooo long.
View 2 Replies View RelatedI am working on creating various standard sized window elevations using dynamic blocks. Each window elevation needs to have text underneath it that tells you the unit size of the window. While I have successfully created all the various elevations using dynamic blocks I can't figure out how to make the text appear to change with the various window unit sizes. for instance I have a small window that has text underneath showing 1818 (18"wide x 18"high). I need text to change to say 1820, 1824, 1830, etc. I can get the 1818 text to stay centered under the elevation as the window gets wider/higher but that is it.
View 9 Replies View RelatedIs there a way to have VARIABLE text size AND BLOCK SIZE autocad 2012, for different scales sizes? To sum it up I am running 1/8th scale on some of the pages in the set with a 1/4 blow up section. I use addressable devices so it is a lot of work to change all the text Is there anything that will auto-update the text size per scale with out having to go through my drawing and repeat all the text and VPfreeze it?
View 9 Replies View RelatedAny ideas how ot fix this? Every time I try to enter text, the edges of the text is surrounded/selected with lines going around it....how do I stop that and have it stop turning my image red (Its supose to be brown, until I click it then it turns red), it isnt even using the correct colors that I set it at.
View 2 Replies View RelatedIf I click on any text the docker shows the incorrect height of the text. I have typed in an measured a 4" H and the docker display tell me its over 5.5".
View 13 Replies View RelatedThere is a font and table style called "Legend" that is automatically generating and can not be purged.
I have looked through all the start up files, all the lisp files and can't find anything that would be creating them!
They appear in any file I open, new or old and even if I open a template file.
I have attached a file that should be empty but you will (or should) see both a font and table style called "Legend".
(FYI I am running AutoCAD Civil 3D 2010 as AutoCAD 2010)
In civil 3d 2014 i need 2 sections (and a profile) all with different scales in the viewports (layout). Sizing of the labels and bands is all fine, only a text item is not updated. I need to display the scale (the number) for the current section (or profile), it works but the scale shown is always the scale from the model and not the scale from the viewport, so the different scaled sections all have the same text in the label, e.g 1:200, even if they are correctly scaled to different factors in defferent viewports.
View 5 Replies View RelatedHow can I use one text box with different text sizes?
View 2 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64