AutoCad :: Change Flyout Tool Bar Text Sizes?

Aug 18, 2013

I've changed the main tool bar text size in Windows 7 control panel, but the flyout text in Modify for example is still too small, how do I alter that?

View 5 Replies


ADVERTISEMENT

AutoCad :: How To Make Text Appear To Change With Various Window Unit Sizes

Mar 19, 2010

I am working on creating various standard sized window elevations using dynamic blocks. Each window elevation needs to have text underneath it that tells you the unit size of the window. While I have successfully created all the various elevations using dynamic blocks I can't figure out how to make the text appear to change with the various window unit sizes. for instance I have a small window that has text underneath showing 1818 (18"wide x 18"high). I need text to change to say 1820, 1824, 1830, etc. I can get the 1818 text to stay centered under the elevation as the window gets wider/higher but that is it.

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Entering Sizes In Text Boxes Does Not Change Object Size?

Apr 4, 2011

this function is not functioning anymore.  I may have done something to cause this but I don't recall.

Entering sizes in the text boxes does not change the object size anymore.

The only option right now is use the transform size docker...would rather not have to do that.

Also, would not like to hit F8...

Draw X5 sp2 (15.2.0.661)

I hate pressing F8 at startup!

View 10 Replies View Related

Photoshop :: Long Click To Select Alternate Tool - Flyout Freezes For Few Seconds

Jun 1, 2013

When I long click to select an alternate tool, the flyout freezes for a few seconds before I can select a tool.

How can I fix this? My only work around right now is to know the tool shortcut and then to cycle through it with shift+tool shortcut.

View 6 Replies View Related

AutoCAD Inventor :: Change Appearance Of Sizes In Sketch?

Feb 11, 2013

to change appearance of the sizes in the sketch Image

View 9 Replies View Related

AutoCAD Inventor :: How To Change Fillet Sizes With Family Table

Feb 16, 2012

i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?

INV 2012

View 4 Replies View Related

AutoCad :: Change Printable Area Of Custom Paper Sizes

Mar 21, 2012

Trying to change the printable area of custom paper sizes?

I've plotter that allows me to create 5 custom paper sizes for each pc3 file, however after create them, i cant always access to change their printable area, you know adjusting their margins, and the strange thing is that this error doesn’t happen all the time,sometimes after a while trying they work, but just for a couple of times, after that the problem remains.

autocad.png

To be more clear, you can see on the image that it doesn’t recognize the custom paper size i have selected, however it works from time to time, allowing me to edit those margins, and after save them, they work just fine and i can use those paper sizes with no problems.

I've tried to edit the pc3 file through windows, and a message appears saying that an unknown error has occurred.

View 0 Replies View Related

AutoCAD Architecture :: Text Sizes Chart

Apr 3, 2013

I'm looking for an autocad text size chart. . . Where I could obtain this information? 

View 2 Replies View Related

Photoshop :: Brush Sizes Tool

Mar 26, 2013

This is about Brush sizes. Here is an example. If I select the Paintbrush tool and select a size of 300 pixels and 100% hardness. The "Circle" that represents the brush is approximately 600 pixels in diameter. Almost twice the size of the actual colour that I want to apply. It makes it very difficult to be precise. Is this a glitch or is there a setting somewhere that I can't find.

View 6 Replies View Related

Photoshop :: Change From Text To Move Tool Via Keyboard?

May 16, 2012

how does one change from the text to the move tool via the keyboard without entering "v" in the text that you were just working on? Even if I move the mouse outside of the text area, pressing "v" on the keyboard adds the "v" character to the text area. Do I need to click on the Move icon on the panel to escape the Text mode?

View 4 Replies View Related

AutoCAD Civil 3D :: How To Load Multiple Text Sizes

Oct 26, 2011

I am trying to load multiple Text Sizes into AutoCAD Civil 3D 2012 so that I can have a list of the standard text sizes (3/32", 3/16", 1/4", 3/8") to choose from the Annotation tab > Text Group > Annotation Text Height drop down list, instead of having to type them in each time.

At first I thought that I could just add the different text sizes using the TEXTSIZE variable command into my drawing template file, but apparently the Text Sizes entered are only retained for that particular session of AutoCAD Civil 3D.  Is there perhaps some other system variable that controls this setting being retained for more than one session??

Then I thought I could just create a program to load the sizes. I originally tried creating a C# .NET program to load the text sizes, but ran into a problem.  I then I tried creating another version of a C# program, as well as an AutoLISP script, thinking that it was perhaps some limitation to my approach (which still may be the case).  But I still keep running into the same problem.  The problem is that only the last text size specified is actually entered into the list of available text sizes.  The other text size values appear to be processed but are not retained in the Annotation Text Height drop down list.

The following is my first attempt with C#:

using Autodesk.AutoCAD.ApplicationServices;
using Autodesk.AutoCAD.Runtime;
public class CreateTextSizes : Autodesk.AutoCAD.Runtime.IExtensionApplication
{
public void Initialize()
{
// Create following Text Sizes:  0.09375 (3/32"), 0.1975 (3/16"), 0.25 (1/4"), 0.375 (3/8")

[code].....

The following is my attempt with AutoLISP:

(defun c:LOADTEXTSIZES()
(Command "TEXTSIZE" 0.09375)
(Command "TEXTSIZE" 0.1975)
(Command "TEXTSIZE" 0.025)
(Command "TEXTSIZE" 0.375)
(Command "TEXTSIZE" 0.09375)
)

View 1 Replies View Related

AutoCad 2D :: Attribute Text - Multiple Sizes In Block

Mar 2, 2012

We have a client whom insists on 1/8" text and my blocks are all sized for 3/32". What I wanted to do is create two visibility states for the block. One using the 1/8" text and one using the 3/32" and be able to switch between them. I can get the border of the tag to work, but the text doesn't switch sizes.

Is this even possible? Is there a better way to deal with all my tags and needing to have two different versions of them? (Tags such as fixture tags, note tags, etc...)

View 4 Replies View Related

CorelDRAW X4 :: Change Cursor From Pointer To Text Writing Tool?

May 27, 2011

Is there a key I can press that will change my cursor from the pointer to the text writing tool?

View 3 Replies View Related

Photoshop Elements :: Type Tool Won't Change Text Size 11?

Sep 19, 2013

The text tool will no longer display the box that allows you to change the text size or text color. (At the bottom left of screen) ELEMENTS 11.

View 2 Replies View Related

Illustrator :: How To Get Text To Change To A Colour Picked Using Eye Dropper Tool

Nov 8, 2012

I'd like to change the text colour to that of one I pick using the eye dropper tool.
 
This is what I do;
 
1. Select the text
2. Using the eye dropper tool i click on an object (lets say a square) filled object with a different colour. (no stroke) - Now I expect that the text will change to the squares colour but it does not.
 
The eye dropper will pick up and change its font/colour if i select other text but not other objects. I have opened the eye dropper preferences and EVERYTHING is ticked in both picks up and applies.

MAC CS6

View 4 Replies View Related

AutoCad :: Variable Text And Block Size For Different Scale Sizes

May 15, 2012

Is there a way to have VARIABLE text size AND BLOCK SIZE autocad 2012, for different scales sizes? To sum it up I am running 1/8th scale on some of the pages in the set with a 1/4 blow up section. I use addressable devices so it is a lot of work to change all the text Is there anything that will auto-update the text size per scale with out having to go through my drawing and repeat all the text and VPfreeze it?

View 9 Replies View Related

CorelDRAW Graphics Suite X6 :: Cannot Change Font - Text Tool Broken

Apr 1, 2012

Enter 2-3 lines of text either artistic text or paragraph text. Select and change the font for the first line only. Lets say you typed in the sample text using the Arial font and then changed the font for just the first line to Arial Black.

Now, how do you change the font for all the text to Arial Black?Now, try to change the font for all the text in the text object to Arial Black.

It is possible for me to change the font for the entire text to any other font, except the font that is used for the first line.

Even if just a single word is typed, and you change the font for just the first character in the word, you then cannot change the word's font, to the font which you used for just the first character.

View 10 Replies View Related

Revit :: How To Change Door And Window Sizes To Mm

Jan 29, 2014

I have a student version of revit 2014 and all my sizing, setting out and dimensions are coming in at feet and inches. I have found out how to convert this to mm but when I load in windows and doors, all the sizes of these are in feet and inches. How to change the door and window sizes to mm so that I know what size they are.

View 2 Replies View Related

GIMP :: Sizes Does Not Change When Select Different Brush

Jun 21, 2013

Because brush size slider is really not easy control for tablet pen, Idecided to create some brushes (range from 1x1 to 9x9 ) for daily use.But I found gimp 2.8.4 does not change the brush size when I selectanother brush. How to make 2.8.4 not persist in prior size setting?

View 1 Replies View Related

Illustrator :: Way To Change Multiple Artboard Sizes?

Jun 27, 2013

Is there a way to take a document that has multiple artboards and adjust all of these sizes without selecting them one at a time?

View 3 Replies View Related

AutoCad :: Click On Table And Remove Overrides - Text Sizes Wrong

Aug 23, 2006

When I paste data from excel into autocad as 'autocad entities'(paste special) the newly created autocad table does not adhere to the pre-defined table style. Even if I right click on the table and remove overides the text sizes are wrong. I suspect it might be related to some variable, but I don't know which one.

View 4 Replies View Related

Paint Shop Pro :: Script To Change All Font Sizes?

Feb 22, 2012

How do I write a script to change the font sizes of ALL text in a vector layer?

View 10 Replies View Related

CorelDRAW X6 :: Unable To Change Fonts Or Font Sizes?

Sep 13, 2012

There is a ovelap happening in the centre. I am unable to change fonts or font sizes. Never faced this problem in 12 or X3.

The screen shots are attached for your reference.

Using this on Windows 7 Professional.

View 6 Replies View Related

Photoshop :: New Member/user (How To Change Layer Sizes?)

Jul 30, 2005

I'm working with two layers how do I change the size of one of them and not the other.

I'm using APS CS

View 2 Replies View Related

Xara :: Possible To Change Default Font Sizes Listed?

May 16, 2012

I have been using Xara for a very long time. I have recently started a side business generating signs and banners and continue to use Xara as my primary graphics editor, but I've discovered a tiny issue and I'm hoping there is some way around it. The Font Size live preview slider is limited (for some reason?) to sizes less than 32pt, and the font drop down list starts getting coarse after 24pt and tops out at 72pt sizes. Since most of what I'm doing involves text sizes larger than 72pt and much larger than the 32pt the slider allows, both of those options for adjusting font size have lost their usefulness.

Is there any way for me to adjust the values for the slider and/or for the drop down list to allow larger numbers? I realize I could use a scaling factor and layout my signs as a fraction of their intended size, but then I have hope to remember to change the scale when I import it into my sign cutting software or run the risk of wasting vinyl, so that would be my last choice.

Surely I can't be the only person who uses large text?

Also, any issues with exporting text into EPS and getting a change in the case of the text? If I export "This is Text" as an EPS file, when I import it into my sign cutting software, I sometimes get "tHIS IS tEXT", but if I import the same EPS into Xara it looks normal. Not sure if that is Xara or the sign cutting software (LXi Express Expert edition)... Until I figure that one out, I make sure to convert text to editable shapes before exporting it...

View 6 Replies View Related

Photoshop Elements :: Change Menu And Icon Sizes In 12?

Dec 31, 2013

I have just installed elements 12 on my Lenovo Ultrabook which is running windows 8 - the icons and menus are so small I need a magnifying glass to read them.

View 1 Replies View Related

Photoshop :: Automatically Change Font Sizes To Uneven Numbers

Jul 15, 2013

Sometimes Photoshop automatically change my font sizes to uneven numbers. For instance 12 pt changes to 11,98 pt. Why and what could be done to avoid this? Also XY positions of objects in Illustrator get changed to sligtly different numbers like 9,98 px.

View 5 Replies View Related

Revit :: How To Use One Text Box With Different Text Sizes

Jul 20, 2012

How can I use one text box with different text sizes?

View 2 Replies View Related

AutoCAD Civil 3D :: Lines And Polylines - Blue Flag Flyout

Dec 11, 2012

What is the blue flag flyout? I cannot move any lines or polylines without it moving whatever is attached. I do have service pack 1 installed.

View 7 Replies View Related

Photoshop Elements :: Why Do File Sizes Change / When Use Process Multiple Images To Add Watermarks

Feb 22, 2014

I'm using Elements 11. In order to add watermarks to many JPG pics at once, I use the function "Process Multiple Files".
 
I select a source folder and a destination folder, and adds a three digit serial number to each file. I do NOT tick the checkbox marked "Change picture size". After that I define the watermark I want printed on my pics and hits OK. All the files in the source folder are processed and saved, with a new name in the destination folder. Fair and square.
 
But. The file size of the new file is heavily reduced, compared to the original. It goes from 10 MB down to 500 KB (in general). Why is that? Is there any way I can prevent it?

View 5 Replies View Related

Photoshop :: Scaled Text Point Sizes Different?

May 31, 2013

If i do a text box and put say 16 point text in it, then (as part of a group or folder) scale that text box (say 200%), i get irregular point sizes.
 
If i use the text tool and select the enlarged copy, the character palette tells me i have 16 point copy still (even though it plainly isnt).
 
If its a single point size and not larger headings, i can use the move tool and it will tell me the faux size - but thats no work around.
 
So in short, how do i scale (using the transform tool) copy and it enlarge the actual point size of the copy.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved