When creating new category, there's Parameter tab for creating new parameters. Now when publishing iPart, created category parameters must be mapped to family table columns. But why? What are they used for?
View 1 RepliesI am trying to give an Expression like sqrt({Jx}/{Section}) in column properties in family table editor. but its not working.
Find the attached image .....
Inventor Professional Suite 2010
Windows 7
I have completed a part file with a family table defined in it. I check this part into vault. When I search for this part in vault it seems like it has taken the part number and the description from the first line in the family table and assigned it to the main part file. To me this is confusing because it looks like there are two items that are the same.
View 2 Replies View Related am trying to edit Family table as per my requirement. In the family table editor, the columns for " Sectional area, Moment of Inertia, Section modulus etc...." are available. These kind of properties have to update manually or there is any option available to generate autmatically ?
Find the attached image for more clarity !!!
Inventor Professional Suite 2010
Windows 7
Just for kicks, make a lot of changes to a Content Center family table, and then accidentally hit the ESC key, thinking it will back you out of what you are typing.
But seriously, ESC while editing any field of a CC family table, EXITS the editor, losing anything you've typed in up to that point. URL....
Inventor 2012
Can equations like this cell equals this cell be used in the Ipart or Iassembly family tables?
I have edited a family with the CC and created a new family in my library. I am happy with the FILENAME & MATERIAL & PART NUMBER. These are perfect in our Parts List.
However, the description in my Parts List is as per the Family Properties, Family Description (see attached).
We have: SOCKET CAP HEAD SCREW SS
we would like: SOCKET CAP HEAD SCREW M5x25 SS
I would have thought this would be achievable, as M5 & 25 are the "size designation" driven from the table.
Is there a Family Category that allows me to create an Extrusion that will then work with the “Attach Top/Base” tool?
For example, instead of using a structural column, I would instead like to use a Model In-Place Extrusion, then be able to attach these columns to my roof.
I’m noticing you don’t get the option to “Attach Top/Base” when you use a Model In-Place Extrusion.
i am learning publishing parts to content centre so as to use for frame generator.Success so far except i cannot work out how to change Fillet sizes with the Family Table.As i increase the sizes of beams i want to also control the fillet size within the Family table.Where do i add the fillet parameter?
INV 2012
I'm trying to create a custom view title family for the office (see attached). We'd like to have a label for Drawing Type (ie. "Building Plan" in the attached image) in the view title which would appear in the properties tab under identity data, next to the standard Title on Sheet, View Name, etc.
In the project, I am able to create a project parameter which appears as desired in the properties tab, but am unable to add the parameter inside the family when creating it. It seems impossible to add this parameter to the standard view title family template (alongside Detail Number, Sheet Number, etc.).
I tried it using a Generic Annotation family, but in the project, Revit does not recognize that family as a view category family and therefore you cannot choose this family when setting your view type.
I have created a new colum in family table editor for a custom part in content center. After that i created an assembly using the same custom part from contentr center. Then i prepared the drawing for that i mean *.idw. In the drawing file i have to attach a part list. and i need to add the the new colum generated in family table to part list.Do we have any option available to add the specified column in part list ?
Inventor Professional Suite 2010
Windows 7
After editing a value in the Family Table in the Content Center Editor I still get the old value. I tried to refresh this Content Center part (as administrator) but without succes.
In the logfile the error message is: "Failed: Unable to create part file. Unknown error."
Earlier (probably with older version of Inventor) I was able to refresh.
Is this a bug, or has this something to do with false settings
Autodesk Inventor Product Design Suite 2013 SP1.1
I have recently modified the CC of a part family so that different materials for the same part can be chosen. When I exit the editor and place the component I can see the choice of the materials in the dialog box - no problems (See 1st attachment" But when I go to another users PC they cannot see any of the new materials in the "Place content center" dialog box!?!
For information, we are running Inv. 2011 with Vault Professional 2012
The CC libraries are stored on the server and we have one custom library to which I have publish the modified part family.
The custom CC has been fully synchronised with the Vault server.
The materials.xml containing the new materials used in the part family has been downloaded to the users local workspace.
Inventor 2014 Pro SP1, Vault 2014 Pro SP1
Windows 7, 64-bit
Intel Xeon 3.6GHz
32GB
Nvidia Quadro 4000
I have created a door family that has a concrete fill that replaces the insulation in an insulated precast wall. When I cut a section through the jambs looking down it looks correct but when the section is looking up the concrete fill pattern is not visible.
I would typically cut my sections looking up so that the exterior face is down in the view as it will be cast.
Currently I am converting old type tables (text type) to real table using lisp. In this I have facing one issue, once converted to table, every time I must align the table like text height, test alignment, row height, margin and each column size (different size).
View 0 Replies View RelatedWe have copied a content centre family, for example
Fasteners->Pins->Clevis Pins->Clevis Pins With Head
Is it possible to change the copied families location, for example.
Fasteners->standard parts
Is it possible or can I only move it if I republish it, but I can't do that because I don't have the part.
I would like to create a new category in content center. I couldn't find any support. How to create it?
View 2 Replies View RelatedI have a question regarding to modify category in a user library. I have to publish a part into a special category in Inventor 2012. These category asks for an Parameter which doesn't exist in my part. Actually is an absolutely useless Parameter so i want to delete it from category. The category was created by an user but i don't know how to delete the parameter. Only if i create a new Category i can change the category-properties just till its created.
View 6 Replies View RelatedSince i get around with the content center i am making our own custom frames and parts.
Now i have made a new category in the structural shapes category with all our own standards. Because we're using some of the standard DIN EN 10210-2 pipes i want to copy this library to our own category and remove some of the pipes we never use.
What i did is:
-save copy as the family.
-move to my own library view
- tried to drag and drop the copied part to our own library (not possible)
- tried to change the family properties (parameter mapping) "Structural Shapes->Round Tubes" (not possible)
Is there any way to change the category, move/copy it to the our own category and delete the old one, of this copied library part , so it is easy reachable in the frame generator or "place from content center"?
I am Trying to add the category Field to the parts list, if a sting exists in the field. I want to run this as a rule at the Drawing Level. I can check if there is a sting in the Category Field But not sure how to add this in the Parts List.
View 4 Replies View RelatedI've created a new library, in the appearance browser and then a category inside called mesh. Somehow I cannot edit the appearance of what I've called Flatex338... I can add it to the current document and then edit it, but cannot edit the original or 'master' appearance.
I'm struggling with the changeover to 2013 with this appearance and materials. Downloaded a document on it from Autodesk but it's only about 30% useful.
I am working with a set of dynamic blocks, each with a block table that provides a drop down for the user to alter attributes from. My goal is to be able to update the block table using VBA to push data from an excel file. I do have import/export code that will update block attributes, but I am not sure the functions that would access the table properties.
View 7 Replies View RelatedDynamic block is for a title block which can be horizontal or vertical and a few different positions.
My lookup table controls the orientation and position of all the items including a number of attributes. But for two attributes I have allowed a grip on the Point Parameters so they can be dragged left/right if there is not enough room when the text is longer.
I can reposition the attributes but if I reposition twice then the Lookup table resets to its "Unmatched" configuration which I don't want. I believe I have to have an "unmatched" setting and "allow reverse lookup" and at the same time I want the user to be able to customize the position of these attributes.
Have dynamic block w/ Block Properties table. Can use table to change size of block by picking from dropdown list. Would like move (insertion) point of entire block to always remain exactly centered in block. Block is simply a rectangle. Have tried setting insertion point using point filters (.x of mid of horiz line, yz of mid of vert line, etc,) but all this does is assign an absolute value to the insertion point. When the size of the block changes, the insertion point remains where it was (absolute position).
Have tried creating a base point parameter, but it will not let me use geometric constraints to define position (coincident w/ endpoint) or add parametric dimension so cannot define location by using formulas (d2 =d1/2, etc). Have kludged it by using dummy point at 0,0 and "fixing" it.
Same thing for location of properties table - how do I tell it to attach the properties table grip "coincident" to the lower right corner of the rectangle so it follows the corner when the size changes?
Have attached what I have so far.
Ultimately want to also place the text "Case 1" "Case 2" etc as read from the properties table in the middle of the rectangle so that when I explode the block the text remains.
I've created a table (a door schedule for example).The data cell type properties is "general". The door # is "001". When I type this in, it switches to just "1" and the type is swiched to "whole number." Same for another cell with a number in it, it switches the cell type on me and I don't want what it switches to. Every time I try to switch it back it doesn't do anything.
How do I stop it from automatically switching, or at very least let me override?
The "Main Stretch" parameter does not correspond with the Block Properties Table. What does this parameter need to be attached to?The paramter will adjust with the pull down options of the Block Properties Table.
View 5 Replies View RelatedI used the Block Properties table in dynamic block editor. I picked 3 out of 6 atributes to include in the Block properties table and I inserted the predefined values. When I view the block in testblock edditor everything works. Everything works also in the same drawing were the block was created. I can choose the predefined block vallues from the dropdown list.
The problem is that when I save the block in the block edditor as new drawing, for the purpose to use this and include this block in another drawing, then the attributes witch were associated with the Block Properties table are missing. They are also missing when I open the block editor in the new drawing. The attributes that were not associated with the table exist.
I have added 2 files. 1 with the block created in the same drawing and another where the block was saved an inserted to a new drawing.
I am unsure weather to post this in Dyn Block technical or Fields as it comprises elements of both.
I am trying to get a field to return a 'lookup properties' value...
Actually, what I am trying to do is use a field to display either a + or a - depending upon upon the state of a flip parameter.
How I have been trying to achieve that is by using a lookup table to assign:
Input Properties.....Lookup Properties
Not flipped........=............+
Flipped.............=............-
Then I'm setting a Field to look at the Object 'Lookup Parameter' and return 'Lookup Action'.
The field then displays '#########' when testing the block.
When I return to edit the field it complains 'the object referenced y the field has been erased'. Both the table and parameter are still there, so I don't know what the problem is. Is there a better way of having a field return a specific value based upon a parameter state?
What I'm interested in is finding a method of connecting several properties from several Autocad drawings to a single table. I would create several custom properties in each drawing and use some of them to fill the boxes in the drawing itself (already implemented) and some of them to fill the table which could later be printed or used in some other manner (maybe even combined with an ERP software interface). Some of the properties would be used both in the drawing and in the table. What I would really like to achieve is to be able to change the property values in the drawings by changing the values in the table and vice versa.
I know how to do it for one of the drawings but I don't know if it's possible to connect several? It doesn't have to be custom properties, it can also be a table in each of the drawing if it's easier to connect with a central table that way. I suppose the best way to gather all the drawings in one place would be to use Sheet Set Manager. A bit of a problem with the sheet set manager is that we have 5 layers set up for each of the drawings and I would like to import only one of them into the sheet set. The thing is picking them by hand would take time and that's the thing I wanted to avoid in the first place. Is there maybe an option to use only import the last active layer into the sheet set?
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.