AutoCAD Inventor :: Appearance Browser - Editing Inside A Category?
Jul 10, 2013
I've created a new library, in the appearance browser and then a category inside called mesh. Somehow I cannot edit the appearance of what I've called Flatex338... I can add it to the current document and then edit it, but cannot edit the original or 'master' appearance.
I'm struggling with the changeover to 2013 with this appearance and materials. Downloaded a document on it from Autodesk but it's only about 30% useful.
View 1 Replies
ADVERTISEMENT
Dec 19, 2011
I would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
View 1 Replies
View Related
Dec 19, 2011
I would like to dedact some parts of the Multi-Category Schedule (to only show the measurements of units of quantities valid for the given materials)
This seems achievable in the working view mode, but when I place the schedule in a layout, the dedaction is no longer visible.
If this setting cannot be transfered to the Layout view, is there a similar method that can be used to dedact some parts of the schedule?
View 1 Replies
View Related
Nov 17, 2012
Alpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies
View Related
Oct 14, 2013
There are many examples of creating rectangular patterns, but not many, if any, of interrogating existing patterns.I have attached the files and a screenshot of a rectangular part inside an assembly. The part contains a rectangular pattern of holes and workplanes.how do I get hold of each proxy of the workplane in the pattern?In other words I don't know what to put in the for loop at the end of this code fragment:
If _invApp.Documents.Count = 0 Then MsgBox("Need to open an the assembly document") ReturnEnd If If _invApp.ActiveDocument.DocumentType <> DocumentTypeEnum.kAssemblyDocumentObject Then MsgBox("Need to have an Assembly document active") ReturnEnd If Dim asmDoc As Assembly Document asmDoc = _invApp.ActiveDocument Dim asmDef As AssemblyComponentDefinition asmDef = asmDoc.ComponentDefinition im occurrences As ComponentOccurrencesoccurrences.
[code]....
View 5 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Nov 7, 2012
When creating new category, there's Parameter tab for creating new parameters. Now when publishing iPart, created category parameters must be mapped to family table columns. But why? What are they used for?
View 1 Replies
View Related
Jul 6, 2012
We have copied a content centre family, for example
Fasteners->Pins->Clevis Pins->Clevis Pins With Head
Is it possible to change the copied families location, for example.
Fasteners->standard parts
Is it possible or can I only move it if I republish it, but I can't do that because I don't have the part.
View 5 Replies
View Related
Jan 23, 2007
I would like to create a new category in content center. I couldn't find any support. How to create it?
View 2 Replies
View Related
Nov 27, 2012
I have a question regarding to modify category in a user library. I have to publish a part into a special category in Inventor 2012. These category asks for an Parameter which doesn't exist in my part. Actually is an absolutely useless Parameter so i want to delete it from category. The category was created by an user but i don't know how to delete the parameter. Only if i create a new Category i can change the category-properties just till its created.
View 6 Replies
View Related
Nov 12, 2013
Since i get around with the content center i am making our own custom frames and parts.
Now i have made a new category in the structural shapes category with all our own standards. Because we're using some of the standard DIN EN 10210-2 pipes i want to copy this library to our own category and remove some of the pipes we never use.
What i did is:
-save copy as the family.
-move to my own library view
- tried to drag and drop the copied part to our own library (not possible)
- tried to change the family properties (parameter mapping) "Structural Shapes->Round Tubes" (not possible)
Is there any way to change the category, move/copy it to the our own category and delete the old one, of this copied library part , so it is easy reachable in the frame generator or "place from content center"?
View 8 Replies
View Related
Apr 4, 2013
I am Trying to add the category Field to the parts list, if a sting exists in the field. I want to run this as a rule at the Drawing Level. I can check if there is a sting in the Category Field But not sure how to add this in the Parts List.
View 4 Replies
View Related
May 31, 2013
Is it possible to add a Appearance tab to a Ipart table? I am cataloging a set of parts and one part is made with steel but in Gloss - Black and Matte - Black and i'd like to differentiate the 2 without haveing to make 2 seperate Ipart files.
View 2 Replies
View Related
Aug 24, 2012
I'm having trouble finding or creating an 'appearance' that actually looks like glass. Each of the appearances in the Inventor library and Autodesk libraries are milky and not very transparent at all. I'd like to find or create a material that is almost 100% clear, but reflects the environment.
The transparency slider scales from 0-100% but the results are more like 0-75%.Inventor Studio looks just as bad.I've got to believe that it's not impossible to do without Showcase or 3DS Max.
View 2 Replies
View Related
Jan 10, 2014
I need to do a ray-traced rendering of a smooth black anodized surface.
However when using the "Anodized Black" appearance, I get a speckled surface when using ray trace, and the part looks like galvanized steel.
View 1 Replies
View Related
Nov 12, 2013
In Inventor LT, it would be very useful if some of my parts were translucent in appearance. I have changed the "feature appearance" of the extrusion to Polycarbonate Clear" but it's still at the default grey.
View 5 Replies
View Related
Dec 7, 2012
How to set Autodesk Appearance Library as default using API
View 2 Replies
View Related
Jul 15, 2013
I created a host of materials with a certain appearance etc and saved them as a library. When I open my Inventor 2013 this morning I seemed to have lost my appearances. It says my materials are missing the Appearance asset - see attached screenshot.
What is this, and how can I rectify the problem?
View 5 Replies
View Related
Oct 6, 2012
I've been attempting to create a sphere with an Earth texture, for which I've made a custom appearance with a flattened picture of earth. Instead of wrapping to the sphere, however, the image is mirrored on both sides of the sphere and extremely distorted. I knew wrapping 2D geometry to a sphere was not strictly possible, but is there no way to pull it off with an image?
If not, would something like this be possible in 3DS max?
View 9 Replies
View Related
May 22, 2013
How can i have extrusion 3 with the Glass appearance or clear so as to look like Glass ?
View 2 Replies
View Related
Mar 6, 2013
I am clearing an override of a part in a subassembly. I tried to use the clear appearance button but I get message saying Active Design View has no appearance overrides which is not true. You can see in my attachment there clearly is an override from Chrome-Polished in the IPT to Satin- Brushed in the IAM.
There is no "Clear Override" in the Appearance pull down. I think I used to be able to click on color As Part in previous Inventor version but now it's different. The black areas are embossed features representing silkscreened graphics I need to preserve.
I tried to post the files in Inventor/Customer Files NG but the "new message" button was grayed out & not working.
View 6 Replies
View Related
Jan 7, 2013
I have an xml file with RAL colors I used befor the new appearance was added in Inventor. Now I want to use ral colors in Inventor 2013 but that I can not manage. how I can add ral colors and also properly be given in my parts.
View 1 Replies
View Related
Jun 17, 2013
Just got upgraded to version 2013 by IT. Seeing that AD still can't maintain consistency from vers to vers. This version replaced 'Color Styles" with 'Appearances'. But, not just appearances, you have Document Appearances, the Autodesk Material Libray, the Autodesk Appearance Library, and the Inventor Material Library.
Why would the Material libraries show up when clicking the Appearances button when there is another button right beside it to get to Materials.
I mean, who is really going to use several dozen different types of flooring. And why is some metal in the metal category and some in default Category. And then some is in the metal Type and some in the generic Type. Is there really a need for two fields for organizing 'appearances' ? If this were a graphical design program I couls see some of this but it is a cad program. Seems like a case of trying to tailor one product to too many markets.
To the question. How do I unlock the Autodesk Appearance Library so I can get rid of all the junk I don't need and add some really obvious ones that are not there.
View 2 Replies
View Related
Sep 20, 2012
I have a problem when I want to use a cutout.
My purpose is to get a perforated plate but Inventor doesn't show this.
Only the black color is shown and not the holes.
View 9 Replies
View Related
May 2, 2012
In 2012 (and earlier) you rotated the texture in Style Editor. This was limited vs the new method.
I have parts with lots of faces and need to rotate all the faces at the same time, like 2012.
Also, I need the changes to be updated in all iparts, whereas at the moment the Adjust only seems to affect each one. Again, much less limited, but I need the option to update all at once too.
View 5 Replies
View Related
May 9, 2013
I have problems with material appearance in the frame generator. I have created a new material 316 stainless steel and assigned a specific colour to it. I have now decided to change that colour but it only changes when I change the material in iProperties of the part. I still get the old colour when I use the frame generator to change the material. The only way to change the colour of my material is thru the appearance tab in the frame generator pop up window.
View 4 Replies
View Related
May 18, 2013
how to change the the appearance of indivitual copied object when using the pattern tool. I can change the appearance on the original object (which is red on the picture) but im having problem changing the the appearance of the other objects ( i want all of them to have different colors)
View 3 Replies
View Related
Sep 12, 2013
Basically i have created a good size IAM and now need to lighten all of the appearances up. Can i change them in the i am and have it update the individual IPT files at the same time? or will i have to open all the ipt files and change it and save?
View 5 Replies
View Related
Dec 2, 2013
I'm trying to apply a Knurled Face appearance to a bar the color will change from the current yellow to a polished steel but either the diamond patter is to fine or not there at all. I've be into the Appearance setting moved the sliders back and forward the preview image changes but NOT the actual appearance on the bar itself.
View 1 Replies
View Related
