AutoCAD Inventor :: Cannot Add Browser Node To Empty Browser Folder
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
ADVERTISEMENT
May 2, 2013
I am attempting to rename a browser node. Here is the code I'm using and I'm getting a "Property 'Label' is 'ReadOnly'" error. In the API I found a note about using SetLabel() but that seems to only have ones for ClientMade browser nodes.
oSubAssyNode.BrowserNodeDefinition.Label = "XXX"
View 2 Replies
View Related
May 18, 2013
line of Inventor 2013 iLogic that can change the browser node name of an IDW?
Specifically, I'm only interested in changing this:
I know how it's set by default, but someone has managed to fix their template so it only ever shows "A3 template" in this field. consequently, this problem now persists throughout hundreds of drawings. If I can fix it with a line of iLogic, then the wickedly awesome CodeInjector can be used for fixing all the drawings.
View 5 Replies
View Related
Jul 1, 2013
Is it possible to make iLogic rule to do this:In dwg Place part and in Browser to see part name without extra typing. Not Sheet 1 sheet 2 etc.
View 9 Replies
View Related
Apr 19, 2012
WHAT WERE they thinking when they created the Rename Browser Command. We had someone find out about it and really screw up a bunch of top level assy's. I'm having to WASTE WAY TOO much time fixing them, bringing them back to showing the modified descriptions in the Browser.
View 5 Replies
View Related
Dec 21, 2012
How can I change the default icon that shows up in the browser node in a part file? I found some VB code but can't seem to get it to work with ilogic.
View 7 Replies
View Related
Oct 18, 2011
is it possible to rename the browser node on part level with an iLogic rule? I know that in the assembly environment is an Inventor OOTB functionality to rename the nodes to the filename, Part number or the default value.
Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM
View 2 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Oct 8, 2012
I am trying to suppress browser folders per the API with no luck is this even possible. I would also like to control its BOM Structure.
View 1 Replies
View Related
Aug 14, 2012
how can I make a folder in the browser in the part modeling and put something like extrude,revolve & ... in the folder? (not in the assembly)
View 1 Replies
View Related
Nov 13, 2012
is it possible to change browser folder icon?
View 7 Replies
View Related
Jul 12, 2012
I'm using the following sample code to add files to a browser folder
Public Sub AddOccurrencesToFolder()
Dim oDoc As AssemblyDocument Set oDoc = ThisApplication.ActiveDocument
Dim oDef As AssemblyComponentDefinition Set oDef = oDoc.ComponentDefinition
Dim oPane As BrowserPane Set oPane = oDoc.BrowserPanes.ActivePane
[Code]....
How do I get the files added to an existing " My Occurrence Folder" rather than creating a new one. Every time I run the code a new folder is created, it does not use the exisitng one
View 1 Replies
View Related
Nov 17, 2012
Alpha sort in assembly bonus tool sorts outside browser folder. Is there any method (API) to sort inside browser folder?
View 3 Replies
View Related
May 5, 2004
Is there a setting or something somewhere that turns off/on the display of the origin folder? I have rebooted and restarted Inventor. For some reason, I can't get see the folder. Even when I edit a part, it is not there. See attached images.
View 5 Replies
View Related
Apr 17, 2013
I'm trying to create an ilogic rule that will look within the folders of an assembly and take the contents of each of those folders and demote them to separate sub-assemblies.
ie. Assembly1 contains NewFolder 1. NewFolder 1 contains Part1:1 and Part2:1. Upon executing the ilogic rule, I would like Assembly1 to contain NewFolder 1 and within NewFolder 1, Assembly1-01. Assembly1-01 contains Part1:1 and Part2:1. I would like this ilogic rule to look within each successive folder within Assembly1 and demote them according to their position in the browser such that NewFolder 1 - at the top of the browser list - contains Assembly-01, NewFolder 2 contains Assembly-02, etc.
I currently copy a master assembly with browser folders that contain parts and sub-assemblies to a secondary assembly where I manually demote the contents of the folders to sub-assemblies. When I create a drawing for our machine assembly department, the demoted sub-assemblies to isolate only those parts - nuts, bolts and the pieces they fit to - so it is easier for the assembly department when putting a machine together.
Is it possible, using ilogic, to demote folder contents to sub-assemblies with an assembly document?
View 2 Replies
View Related
Sep 22, 2011
how to add custom browser views to the project browser window. See the attached image
View 1 Replies
View Related
Jan 19, 2013
I can't find the preferences for changing the default browser than opens when previewing an animation.
View 2 Replies
View Related
May 29, 2013
When you place a part (let’s say structural steel part) from content center as a custom part and later change the part size, the browser still shows the old part name which makes it very confusing when scanning through the browsers when you're trying to find something. It makes it almost unusable if you can’t trust the description. How do others handle this? I know about browser rename but that won't work because it defaults back when you close and reopen.
View 4 Replies
View Related
Nov 1, 2013
I am getting the i symbol in front of my 3D sketch in the browser bar. Unlike a 2D sketch which I can open and run sketch doctor, I am unsure how to resolve issues with this sketch.
View 1 Replies
View Related
Nov 15, 2012
I have many symbols next to the bolted connections in my browser in Inventor 2013 which I do not see changing. what these stmbols mean and why there are there ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 4 Replies
View Related
Oct 20, 2011
Why sometimes we have an asterisk (a star) after the file name in the browser (in "Vault mode")? see attachment
View 1 Replies
View Related
Aug 23, 2012
What does the red up arrow next to extrussion features indicate?
View 2 Replies
View Related
Jun 14, 2013
I just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
View 9 Replies
View Related
Jan 27, 2010
Inventor 2010 / I'm finding myself scrolling up and down the browser bar quite a lot to get to the Solid Bodies folder for example, and I was wondering if it was possible to group features into folders or something to make the journey quicker, with the benefit of also being able to just organize things a bit better.
View 9 Replies
View Related
Jul 26, 2013
How to enable model browser in Autocad Inventor Professional 2014 Student version ?
View 2 Replies
View Related
Nov 15, 2012
I use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
View 1 Replies
View Related
Feb 19, 2013
I changed the name of a valve manually in the browser. Now, when I copy the valve to a different part name it does not update the name of the new part in the browser. How do I get the part name in the browser to be dynamic again?
View 5 Replies
View Related
Jan 14, 2013
I have the attached symbol next to parts in an assembly, I'm not sure what this is, I have updated all components in the assembly and checked that in the sketch doctor for error however there are none.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 25, 2012
My browser is gone. When toggled, it does not show up. I ushally have two screens, but when i have it on only one screen it disappers completely. My laptop is set to " Laptop display" Only mode. I bring up Inventor, and my browser will not toggle on and off on the screen even though the box is checked, and unchecked.
View 2 Replies
View Related
Dec 24, 2013
Code that can provide basic information of the highlighted browsernode on the browser bar? i can get a mouseclick but not sure on the mousemove.
View 2 Replies
View Related
