AutoCAD Inventor :: Component Name On Assembly Browser
Nov 15, 2012
I use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
View 1 Replies
ADVERTISEMENT
Jan 26, 2012
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64
View 4 Replies
View Related
Jan 11, 2013
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Aug 21, 2013
When I try to replace a component in Inventor 2014. It replaces it but does not update the tree in the browser. I have to manually delete the part and place a new one in.
View 9 Replies
View Related
Aug 12, 2013
I made a new positional representation (maybe it's connected, i don't know), and removed all the constraints from a part, but still can't move it.
It has other parts connected with it, and bolt, but i think i removed the governing constraint, but, cannot move it.
It's an assembly of about 5 parts, should i zip and attach it?
View 5 Replies
View Related
Mar 29, 2012
I'm working on an iLogic application for an assembly. I need some code to edit a particular component occurrence and then open one of that component's iLogic forms.
Basically automating the keystrokes that I'm doing manually (Select, right-click and edit, then open the iLogic form for that part). Do I have to scroll through all occurrences in the browser or is there a way to call that component by name?
View 6 Replies
View Related
Dec 24, 2013
Code that can provide basic information of the highlighted browsernode on the browser bar? i can get a mouseclick but not sure on the mousemove.
View 2 Replies
View Related
Mar 10, 2013
I just download the AutoDesk Inventor 2012 but I didn't use this software before. I just download an example and refer youtube to create my own parts. But when I place all parts together, i.e. assemble all parts, I find that the parts are not looks good because the size either too big or too small. I try the whole afternoon but I still can't find the way to change the size of an individual component.
View 9 Replies
View Related
Oct 11, 2011
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
View 2 Replies
View Related
Oct 2, 2012
I have an iassembly model with iparts in it. I am trying to make one absolutely complete model rather than have several models with redundant parts in it. For example having the full assembly and making a Top Line Drawing from that, but then also making a drawing from the individual components.
So for example I have a Top Line assembly drawing with a tank with all the fittings, gauges, and instrument panels shown. Then I would want to make another set of drawings showing the tank itself, fittings, gauges, and the instrument panel. My main issue is with the tank drawing; the tank drawing is supposed to be simply the tank so I would need to remove the fittings, gauges, instrument panel etc.
I would like to know if there is a way to "Hide" or "Supress" the components that I do not need for a particular drawing without taking them out of the model; yet at the same time removing it from the BOM because they wont be necessary at this level.
View 6 Replies
View Related
Jun 9, 2013
I don't remember... what is it?
How can i create it...and why?
View 9 Replies
View Related
Mar 30, 2012
I have an assembly that is nearly completed. I am trying to change the lengths of two side rails (arrow pointing to one of them). On each end of these rails are several components that have been constrained to the rails.
When I change the length of the rails, many of the constraints show errors. I expected that all components would move with the ends of the rails as they are shortened since that is where they were constrained, but this has not happened.
The constraint recovery tool has not been useful to me.
View 3 Replies
View Related
Mar 12, 2013
I have an i assembly with some lengthy and unique ilogic to control what parts are included / excluded based on user inputs in a form. To begin, the program includes all components, and then excludes the ones that aren't needed. This is basically, briefly what the first part of that looks like:
For Each oCompOcc In oCompDef.Occurrences
i=i+1
'Include all currently excluded components
If oCompOcc.Excluded=True Then
oAssObj=oCompDef.Occurrences.Item(i)
oDoc.SelectSet.Select(oAssObj)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()InventorVb.DocumentUpdate()
Else
End If
Next
InventorVb.DocumentUpdate()
So this works just fine, mostly. I run into an issue with the component occurrences that are within patterns (I have 2 patterns - 1 circular and 1 rectangular). This code will "Include" all occurrences inside an "Excluded" pattern, but the pattern itself remains "Excluded". In other words, in the browser, the pattern name appears greyed out and crossed out, but all the elements and the components within them appear "alive", so to speak. But the BOM indicates a Qty. of ZERO for these components since the pattern that.
I can toggle include / exclude of patterns using the same method:
oDoc.SelectSet.Select(oPattern)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()
But it seems I can't identify which patterns are excluded to start with, like:
If oPattern.Excluded=True Then...
I get an error when I try this. Is there a way around it? How can I find and select excluded component patterns in order to toggle them to "Include"?
View 2 Replies
View Related
Nov 22, 2011
I have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
View 2 Replies
View Related
Jul 17, 2013
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies
View Related
Sep 28, 2012
I have a simple code below trying to iterate through all the assembly component and copy the iProperties > Occurrece Name (i.e. "Part1:1") and paste it to iProperties > Project tab > Part Number field for each individual part in assembly.
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
The Debug message shows the correct output for every iteration, but when I check each part's properties they all have the Occurrence Name of the last part in the aseembly.
View 4 Replies
View Related
Apr 29, 2013
I have geometry not updating after replacing a component in an assembly.
I have drawn part A and in the assembly environment I have projected cut edges on a XY Plane in a 2D Sketch.
After replacing component A in the assembly with part B (not identical but very close) i was expecting the projected geometry to update. But it doesn't. The "local update" button is greyed out in assembly mode. also the Rebuild command does not seem to update the projected geometry.
I can see the new 3d shape and the old projected geometry. How to get the projected geometry to update?
Inventor 2013 Build 176 SP1.1
View 5 Replies
View Related
Sep 21, 2012
I want to import a component consisting of about 50 different parts into an assembly that is about 300 different parts.
When I "place as component" into the assembly it imports into the assembly fine as a component.
When I make an exploded view I can split the component into seperate parts but when I make an .idw file the parts list just shows the component as one part number.
I would like to the .idw to show all of the parts that are in the component separately.
Is there some kind of expansion menu or do I have to re-make the component in the assembly file?
View 4 Replies
View Related
Aug 11, 2013
I have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
View 9 Replies
View Related
Oct 4, 2011
I am trying to switch component rows within my assembly file but can't seem to do so. All of the files are generated, yet and still I am not able to change component rows based on user parameters. Files are attached.
My code is as follow in Ilogic
MultiValue.Setlist("Material", "1", "2")
If Material = "2"
iPart.ChangeRow("RING", "RING-03:1")
End If
View 2 Replies
View Related
May 23, 2012
I have a browser display issue that occurrs sometimes when imported parts are inserted into an assembly model. Before dropping some imported parts into my assembly model I changed the filename to something corresponding to our part numbering system. When the part is dropped into the model, the name of the instance displayed in the assembly browser is the same as that originally used by the originator of the model.
I know I can change the name in the browser by editing the name field in the occurrance tab; but I'd need to do this for each instance. What iproperty field (or other property field) should I edit at the part level so that the revised part name is used in the assembly browser whenever that part is inserted into an assembly?
View 2 Replies
View Related
May 5, 2004
Is there a setting or something somewhere that turns off/on the display of the origin folder? I have rebooted and restarted Inventor. For some reason, I can't get see the folder. Even when I edit a part, it is not there. See attached images.
View 5 Replies
View Related
Feb 8, 2012
using IV2012 within the same project file i have three models. one model i can open parts or assemblies from the browser or right click on the component on the window. the other two models upon the right click or selecting in the browser the open or the edit are not available as an operation.
T7400-64bit XP
Xeon 3.2 GHz, 8GB
1.5GB NVIDIA Quadro FX5600
Factory Design Suite 2012
View 1 Replies
View Related
Aug 2, 2013
I have a damper, I started it with the bottom frame member, which was grounded at origins when it was placed and I built the rest of the damper from there. All my constraints for blades and linkages and all related parts were able to move (with the damper held in place in "space" by the grounded frame member.
For parts list purposes I need all 4 sides of the frame to be one BOM item so I demoted the 4 frame pieces as one inseparable assembly.
After that all motion is lost in the main assembly and I can drag it all over "space" since I lost the bottom frame member ground point. I can ground the demoted frame assembly to lock it down, and drive the constraints to make the damper parts move to create positional representations.
I guess I'm just wondering if I'm not really supposed to be able to "move" components arbitrarily and I should just be driving the constraints all the time in the first place...I'm just not sure why the motion is lost after the initial ground point is lost.
View 1 Replies
View Related
Dec 8, 2011
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies
View Related
Jun 28, 2013
place a component in the assembly.
create an assembly plane based on the assembly origin planes, (not the component origin planes).
in the browser, try to drag the plane above the component.
its not working on my machine?
View 7 Replies
View Related
Jan 6, 2012
I have tried the Frame Analysis for the first time and quit from this option as requested.
BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.
Here is some bug. [URL] ....
View 6 Replies
View Related
Sep 19, 2012
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
View 2 Replies
View Related
Aug 2, 2013
I need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
View 4 Replies
View Related
