AutoCAD Inventor :: Top Line Assembly And Component Drawings
Oct 2, 2012
I have an iassembly model with iparts in it. I am trying to make one absolutely complete model rather than have several models with redundant parts in it. For example having the full assembly and making a Top Line Drawing from that, but then also making a drawing from the individual components.
So for example I have a Top Line assembly drawing with a tank with all the fittings, gauges, and instrument panels shown. Then I would want to make another set of drawings showing the tank itself, fittings, gauges, and the instrument panel. My main issue is with the tank drawing; the tank drawing is supposed to be simply the tank so I would need to remove the fittings, gauges, instrument panel etc.
I would like to know if there is a way to "Hide" or "Supress" the components that I do not need for a particular drawing without taking them out of the model; yet at the same time removing it from the BOM because they wont be necessary at this level.
View 6 Replies
ADVERTISEMENT
Jan 11, 2013
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies
View Related
Jul 10, 2012
I'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies
View Related
Nov 9, 2011
I want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies
View Related
Feb 18, 2013
Why the visibility cannot be toggled on/off in drawings? Why the visibility selection is greyed out?
View 9 Replies
View Related
Aug 12, 2013
I made a new positional representation (maybe it's connected, i don't know), and removed all the constraints from a part, but still can't move it.
It has other parts connected with it, and bolt, but i think i removed the governing constraint, but, cannot move it.
It's an assembly of about 5 parts, should i zip and attach it?
View 5 Replies
View Related
Mar 29, 2012
I'm working on an iLogic application for an assembly. I need some code to edit a particular component occurrence and then open one of that component's iLogic forms.
Basically automating the keystrokes that I'm doing manually (Select, right-click and edit, then open the iLogic form for that part). Do I have to scroll through all occurrences in the browser or is there a way to call that component by name?
View 6 Replies
View Related
Nov 15, 2012
I use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
View 1 Replies
View Related
Aug 21, 2013
I am looking for a way to create an external rule that will allow me to turn off the visibility of bolt generator items in the model while I am looking at the drawing. Bolts may be buried several subassemblies (4 - 6) deep.
View 6 Replies
View Related
Mar 10, 2013
I just download the AutoDesk Inventor 2012 but I didn't use this software before. I just download an example and refer youtube to create my own parts. But when I place all parts together, i.e. assemble all parts, I find that the parts are not looks good because the size either too big or too small. I try the whole afternoon but I still can't find the way to change the size of an individual component.
View 9 Replies
View Related
Oct 11, 2011
I was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
View 2 Replies
View Related
Mar 30, 2012
I have an assembly that is nearly completed. I am trying to change the lengths of two side rails (arrow pointing to one of them). On each end of these rails are several components that have been constrained to the rails.
When I change the length of the rails, many of the constraints show errors. I expected that all components would move with the ends of the rails as they are shortened since that is where they were constrained, but this has not happened.
The constraint recovery tool has not been useful to me.
View 3 Replies
View Related
Mar 12, 2013
I have an i assembly with some lengthy and unique ilogic to control what parts are included / excluded based on user inputs in a form. To begin, the program includes all components, and then excludes the ones that aren't needed. This is basically, briefly what the first part of that looks like:
For Each oCompOcc In oCompDef.Occurrences
i=i+1
'Include all currently excluded components
If oCompOcc.Excluded=True Then
oAssObj=oCompDef.Occurrences.Item(i)
oDoc.SelectSet.Select(oAssObj)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()InventorVb.DocumentUpdate()
Else
End If
Next
InventorVb.DocumentUpdate()
So this works just fine, mostly. I run into an issue with the component occurrences that are within patterns (I have 2 patterns - 1 circular and 1 rectangular). This code will "Include" all occurrences inside an "Excluded" pattern, but the pattern itself remains "Excluded". In other words, in the browser, the pattern name appears greyed out and crossed out, but all the elements and the components within them appear "alive", so to speak. But the BOM indicates a Qty. of ZERO for these components since the pattern that.
I can toggle include / exclude of patterns using the same method:
oDoc.SelectSet.Select(oPattern)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()
But it seems I can't identify which patterns are excluded to start with, like:
If oPattern.Excluded=True Then...
I get an error when I try this. Is there a way around it? How can I find and select excluded component patterns in order to toggle them to "Include"?
View 2 Replies
View Related
Nov 22, 2011
I have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
View 2 Replies
View Related
Jul 17, 2013
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies
View Related
Sep 28, 2012
I have a simple code below trying to iterate through all the assembly component and copy the iProperties > Occurrece Name (i.e. "Part1:1") and paste it to iProperties > Project tab > Part Number field for each individual part in assembly.
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
The Debug message shows the correct output for every iteration, but when I check each part's properties they all have the Occurrence Name of the last part in the aseembly.
View 4 Replies
View Related
Apr 29, 2013
I have geometry not updating after replacing a component in an assembly.
I have drawn part A and in the assembly environment I have projected cut edges on a XY Plane in a 2D Sketch.
After replacing component A in the assembly with part B (not identical but very close) i was expecting the projected geometry to update. But it doesn't. The "local update" button is greyed out in assembly mode. also the Rebuild command does not seem to update the projected geometry.
I can see the new 3d shape and the old projected geometry. How to get the projected geometry to update?
Inventor 2013 Build 176 SP1.1
View 5 Replies
View Related
Sep 21, 2012
I want to import a component consisting of about 50 different parts into an assembly that is about 300 different parts.
When I "place as component" into the assembly it imports into the assembly fine as a component.
When I make an exploded view I can split the component into seperate parts but when I make an .idw file the parts list just shows the component as one part number.
I would like to the .idw to show all of the parts that are in the component separately.
Is there some kind of expansion menu or do I have to re-make the component in the assembly file?
View 4 Replies
View Related
Aug 11, 2013
I have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
View 9 Replies
View Related
Oct 4, 2011
I am trying to switch component rows within my assembly file but can't seem to do so. All of the files are generated, yet and still I am not able to change component rows based on user parameters. Files are attached.
My code is as follow in Ilogic
MultiValue.Setlist("Material", "1", "2")
If Material = "2"
iPart.ChangeRow("RING", "RING-03:1")
End If
View 2 Replies
View Related
Aug 2, 2013
I have a damper, I started it with the bottom frame member, which was grounded at origins when it was placed and I built the rest of the damper from there. All my constraints for blades and linkages and all related parts were able to move (with the damper held in place in "space" by the grounded frame member.
For parts list purposes I need all 4 sides of the frame to be one BOM item so I demoted the 4 frame pieces as one inseparable assembly.
After that all motion is lost in the main assembly and I can drag it all over "space" since I lost the bottom frame member ground point. I can ground the demoted frame assembly to lock it down, and drive the constraints to make the damper parts move to create positional representations.
I guess I'm just wondering if I'm not really supposed to be able to "move" components arbitrarily and I should just be driving the constraints all the time in the first place...I'm just not sure why the motion is lost after the initial ground point is lost.
View 1 Replies
View Related
Dec 8, 2011
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies
View Related
May 21, 2012
I have a fixture that will have a symmetrically opposite fixture. Is there a way to copy/mirror the fixture in vault that would include the drawings?The new fixture would also be in a new project.
I was thinking I would copy the entire design in vault to a new project. I could then open it up and mirror the entire assembly. Would that work?
View 5 Replies
View Related
Jan 9, 2014
I wonder if there is any way of creating the list of drawings that derive from a general assembly, which contains sub assemblies and spare parts. That involves to export some personalized i properties, such as nº of drawing, nº of father drawing (for sub-assemblies), and title.
The idea is creating a inculcated link between these drawings (.idw files) and an excel file that, if possible, updates itself when changing the drawings.
View 5 Replies
View Related
Oct 5, 2009
Is there a way (either thru Inventor or Vault) of print ALL idw (drawings) files related to an iam (assembly)?
Inventor (and Vault) are capable of creating and managing a BOM of the iam files and would think that it would be reltivly easy to query this bom and "find" all the associated idw files and batch print them. Possibly with the option to select the "levels" to dril down to (All, Top Level, Sub Assemblies within the iam, etc, etc)
View 9 Replies
View Related
Dec 11, 2012
Is it possible to plot (or print) all sub assemblies or parts drawings into separate pages by code?
I do not want to open and print every parts. One code and print all... Is it possible?
View 6 Replies
View Related
Dec 6, 2011
We have some serious problems by creating assembly drawings with reference geometries in inventor 2010. Our target is, to create a drawing that look the way, the attachment shows (Picture-1) The sheet metal plates Pos 10-100 are an assembly. And the assembly in the back is the reference geometry. It’s a frame consists of steel sections. What we want: 1. The frame must be phantom lined in the idw. 2.
The Sheet Metal parts must be thick lined. 3. The Partslist of the Assembly should only contain the sheet metal parts and not the frame We have some ideas to solve this case, but each of them is nor perfect (please see the attachment Box.pdf) And there’s another problem (described in part 3 of attachment), we cannot position viewports or drawing elements to each other exactly. You have no possibility to give them dependencies. Also if you want to position symbols to each other. All of them are only near to be exact, but that’s a big problem. If you change contents of a viewport, another should be aligned to it, but that doesn’t work.
View 2 Replies
View Related
Jan 28, 2010
I have written a program within Inventor that list all components of an assy with their properties (iproperties and properties from Producstream) and allow an export of the bill of material to Excel with our company layout.
I want to add a function to my program in order to print all drawings that belong to an assy.
I have the list of components and I want to use the new functionality of the Producstream menu that allows us to open the attached drawing.
But I don’t know which library and which property.
View 9 Replies
View Related
Aug 16, 2011
I want to be able to hide a part of an assembly in one projected view of the 2d drawing but not all, however when I do so the hidden lines stay hidden lines. They do not change. I know you can change the hidden line properties to make them continuous lines but is there a setting that will allow these lines to change automatically?
View 9 Replies
View Related
Apr 5, 2013
What's the purpose of making modeling edits at the assembly level if those edits don't show up in a drawing of the parts? Sure, it makes the assembly look prettier and more true to the final product, but say I make a bunch of cuts, holes, etc. at the assembly level, but then I make a drawing for one of the parts that was affected... those edits don't show up on the part itself, so all those edits are of absolutely no use to me when I need to give the guys in the shop a detail drawing of how to make the part. Why I would make edits at the assembly level?
View 9 Replies
View Related
Nov 20, 2012
is there a way to make the drawings like Lego does for assembling the stuff? After you finish one step, of lets say three pieces put together, and you go to the next step those pieces are like grayed / shaded out and you know to build the next pieces in what position etc..
View 1 Replies
View Related
