I made a new positional representation (maybe it's connected, i don't know), and removed all the constraints from a part, but still can't move it.
It has other parts connected with it, and bolt, but i think i removed the governing constraint, but, cannot move it.
It's an assembly of about 5 parts, should i zip and attach it?
I am trying to make port rims for pipes that can be swapped in and out of an assembly. However, the ports will all be different sizes and located differently so I need the cut to be part of the port rim component, but affect the entire assembly it is part of. I've been trying to get this to work for the better part of a day now,Here's a picture of what im talking about. I'm running Inventor 2008 by the way.
View 2 Replies View RelatedI'm looking for the best way to create a separate assembly out of various component parts in an existing assembly so that the whole thing can be placed in an assembly as you would a part, I know it's possible to demote components within an assembly but are there any other methods similar / better ?
View 2 Replies View RelatedI want to be able to control the location/position of a component in an assembly. This is easy enough through the iProperties/Occurrence tab and then adjust the location of the X,Y, and Z offsets. Is this possible using iLogic? I have been unable to find a function to access via iLogic. Ultimately I am trying to translate a component about an axis not a pattern.
View 1 Replies View RelatedI'm working on an iLogic application for an assembly. I need some code to edit a particular component occurrence and then open one of that component's iLogic forms.
Basically automating the keystrokes that I'm doing manually (Select, right-click and edit, then open the iLogic form for that part). Do I have to scroll through all occurrences in the browser or is there a way to call that component by name?
I use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
I just download the AutoDesk Inventor 2012 but I didn't use this software before. I just download an example and refer youtube to create my own parts. But when I place all parts together, i.e. assemble all parts, I find that the parts are not looks good because the size either too big or too small. I try the whole afternoon but I still can't find the way to change the size of an individual component.
View 9 Replies View RelatedI was wondering if there was a way to suppress a component in the main assembly, and keep it from appearing in the parts list whenever I create one in the idw. environment? I am creating an iassembly, and generating different file versions from the main assembly in my table. In order for me to create different versions off of this main assembly, it is required that I suppress certain sub assemblies or components. I can't get the suppressed componenets to not show up in my parts list when I create it. I turned off enabled and visibility and it still appears in the BOM. Creating a different level of detail doesn't even solve this.
I know I can manually not have it show up in the BOM, but it becomes very time consuming trying to make certain rows not appear in the BOM table.
I have an iassembly model with iparts in it. I am trying to make one absolutely complete model rather than have several models with redundant parts in it. For example having the full assembly and making a Top Line Drawing from that, but then also making a drawing from the individual components.
So for example I have a Top Line assembly drawing with a tank with all the fittings, gauges, and instrument panels shown. Then I would want to make another set of drawings showing the tank itself, fittings, gauges, and the instrument panel. My main issue is with the tank drawing; the tank drawing is supposed to be simply the tank so I would need to remove the fittings, gauges, instrument panel etc.
I would like to know if there is a way to "Hide" or "Supress" the components that I do not need for a particular drawing without taking them out of the model; yet at the same time removing it from the BOM because they wont be necessary at this level.
I have an assembly that is nearly completed. I am trying to change the lengths of two side rails (arrow pointing to one of them). On each end of these rails are several components that have been constrained to the rails.
When I change the length of the rails, many of the constraints show errors. I expected that all components would move with the ends of the rails as they are shortened since that is where they were constrained, but this has not happened.
The constraint recovery tool has not been useful to me.
I have an i assembly with some lengthy and unique ilogic to control what parts are included / excluded based on user inputs in a form. To begin, the program includes all components, and then excludes the ones that aren't needed. This is basically, briefly what the first part of that looks like:
For Each oCompOcc In oCompDef.Occurrences
i=i+1
'Include all currently excluded components
If oCompOcc.Excluded=True Then
oAssObj=oCompDef.Occurrences.Item(i)
oDoc.SelectSet.Select(oAssObj)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()InventorVb.DocumentUpdate()
Else
End If
Next
InventorVb.DocumentUpdate()
So this works just fine, mostly. I run into an issue with the component occurrences that are within patterns (I have 2 patterns - 1 circular and 1 rectangular). This code will "Include" all occurrences inside an "Excluded" pattern, but the pattern itself remains "Excluded". In other words, in the browser, the pattern name appears greyed out and crossed out, but all the elements and the components within them appear "alive", so to speak. But the BOM indicates a Qty. of ZERO for these components since the pattern that.
I can toggle include / exclude of patterns using the same method:
oDoc.SelectSet.Select(oPattern)
ThisApplication.CommandManager.ControlDefinitions.Item("ExcludeCtxCmd").Execute()
But it seems I can't identify which patterns are excluded to start with, like:
If oPattern.Excluded=True Then...
I get an error when I try this. Is there a way around it? How can I find and select excluded component patterns in order to toggle them to "Include"?
I have a wall of frames, if you will, and some frames within this wall are different sizes. When doing the BOM, I want to be able to combine anything that has the same stock number as well as the same cut length. The only way I have thought to do this so far is to cycle through each stock number and if the cut length is the same, I override the quantity of one and change the BOM Structure of the other to "Reference".
How can I change the BOM Structure to reference without selecting the part or going through the BOM Editor? Is there some VBA code I could utilize? I am striking out by solely using iLogic.
I want to show one of the parts in a drawing of an assembly in hidden lines, it's a reference part only.
View 3 Replies View RelatedI have a simple code below trying to iterate through all the assembly component and copy the iProperties > Occurrece Name (i.e. "Part1:1") and paste it to iProperties > Project tab > Part Number field for each individual part in assembly.
' set a reference to the assembly component definintion.
' This assumes an assembly document is open.
Dim oAsmCompDef As AssemblyComponentDefinition
oAsmCompDef = ThisApplication.ActiveDocument.ComponentDefinition
'Iterate through all of the occurrences
Dim oOccurrence As ComponentOccurrence
For Each oOccurrence In oAsmCompDef.Occurrences
Dim oName As String
oName = oOccurrence.Name
iProperties.Value(oOccurrence.Name, "Project", "Part Number") = oName
MessageBox.Show(oOccurrence.Name, "iLogic")
Next
The Debug message shows the correct output for every iteration, but when I check each part's properties they all have the Occurrence Name of the last part in the aseembly.
I have geometry not updating after replacing a component in an assembly.
I have drawn part A and in the assembly environment I have projected cut edges on a XY Plane in a 2D Sketch.
After replacing component A in the assembly with part B (not identical but very close) i was expecting the projected geometry to update. But it doesn't. The "local update" button is greyed out in assembly mode. also the Rebuild command does not seem to update the projected geometry.
I can see the new 3d shape and the old projected geometry. How to get the projected geometry to update?
Inventor 2013 Build 176 SP1.1
I want to import a component consisting of about 50 different parts into an assembly that is about 300 different parts.
When I "place as component" into the assembly it imports into the assembly fine as a component.
When I make an exploded view I can split the component into seperate parts but when I make an .idw file the parts list just shows the component as one part number.
I would like to the .idw to show all of the parts that are in the component separately.
Is there some kind of expansion menu or do I have to re-make the component in the assembly file?
I have a part called "bracket" which has a multi-value parameter "mass" which can be 100, 200, 300, or 400 and controls the width of the bracket.I have an assembly into which I have placed thee brackets.
How do I set different parameters for each of the instances of "bracket"?I want one bracket with mass = 100, one with mass = 200, and one with mass = 300, such that I have three brackets of different widths.
I must not be searching on the right text in Google because I find only ways to change the value of the parameter within the core component (such that all brackets change and end up the same width).
I am trying to switch component rows within my assembly file but can't seem to do so. All of the files are generated, yet and still I am not able to change component rows based on user parameters. Files are attached.
My code is as follow in Ilogic
MultiValue.Setlist("Material", "1", "2")
If Material = "2"
iPart.ChangeRow("RING", "RING-03:1")
End If
I have a damper, I started it with the bottom frame member, which was grounded at origins when it was placed and I built the rest of the damper from there. All my constraints for blades and linkages and all related parts were able to move (with the damper held in place in "space" by the grounded frame member.
For parts list purposes I need all 4 sides of the frame to be one BOM item so I demoted the 4 frame pieces as one inseparable assembly.
After that all motion is lost in the main assembly and I can drag it all over "space" since I lost the bottom frame member ground point. I can ground the demoted frame assembly to lock it down, and drive the constraints to make the damper parts move to create positional representations.
I guess I'm just wondering if I'm not really supposed to be able to "move" components arbitrarily and I should just be driving the constraints all the time in the first place...I'm just not sure why the motion is lost after the initial ground point is lost.
I have a sketch on a component. That component is being used in an assembly. The assembly drawing (.idw) does not show the sketch on that component. I have made them visible on the component, but don't want it visible on the assembly model. (only the assembly drawing)
View 1 Replies View RelatedI have a frame generator assembly that I created to take advantage of the frame analysis tools. This assembly was later broken down into the main fabricated assemblies (for drawing purposes) using the "demote frame generator component" tools. The basic question is this: can I take one of the "demoted" sub-assemblies and move it to another assembly file all-together?
best way to move the four legs from the platform assembly to the tank assembly after the fact? I was thinking I would just place the leg sub-assembly into the tank assembly and then delete it out of the platform one but I'm not sure of the ramifications.
Inventor Professional 2013 (SP-2.3), Product Design Suite Ultimate
Desktop: Intel Core i7 3.4GHz, 16.0 GB RAM, Windows 7 Ultimate SP-1, 64-bit OS, (2) GeForce GTX 580 (331.81), Space Pilot Pro (3.16.1)
Laptop: Intel Core i7 3.9GHz, 16.0 GB RAM, Windows 7 Pro SP-1, 64-bit OS, GeForce GTX 780 (331.81), SpaceNavigator (3.17.7)
I have a sub-assembly that is flexible, (constrained properly, not grounded) and when I try to move it in the main assembly, I get the "universal NO" symbol attached to my cursor. There are no constraints preventing the movement in the sub, since I can move it however I want when the sub is opened.
Inv 2011
I need a way to run a rule which is saved in my top-level assembly using iLogic rule which is saved in a part file in the parent assembly.
I have even tried using an external rule in a txt file, but that gives the error "Component: This function can only be used in an assembly." - which makes no sense to me. I hope I am just missing something simple. I cant believe with all its other strengths, that iLogic would be so limited in that regard. Why is there not simply a snippet under the 'Run Other' that allows you to specify an assembly file and the rule name? (like there is for running a rule in a component from the assembly)
I insert parts in an assembly, new parts from content center or from a library, without projected edjes, they are free to move until i impose the first constraint, the axis to axis alignment of round parts, then i cannot move them anymore in order to continue constraining them
View 5 Replies View Related[URL]
I'm trying to move a bunch of unconstrained parts in an assembly. I want them to stay the same distance relative to each other so I want to move them all at once as a whole group. As the above thread states, when I use CTRL + left mouse button and select the desired parts, only one of the parts will move.
I have finished all my parts and now i have to assemble them. I normally just use the constrain tools, but this time i need to set a part in mid air. I would like to use the move tool, but with exact xyz coordinates. I only seem to be able to do that with an UCS (coordinate system), not the part itself. I guess it's just a button i'm missing somewhere.
View 2 Replies View RelatedIn an assembly with unconstrained parts, if you select multiple parts and drag the parts, only the first selected part moves.Is this just me?
View 3 Replies View RelatedI have been building an assembly and suddenly I am unable to move parts according to their constraints. I can move them as soon as they are placed but as soon as I add one constraint it's as if they are glued in place. For example, when I line up two holes I can no longer rotate one part around the grounded component.
Have a turned off some functionality of the program?
I have two set of chain drives connected to each other through a common axle. The motor (which is not visible in my assembly) drives the yellow sprocket.
The two sprockets mounted on the grey axle is attached with a key way so when the yellow sprocket turns, the two chain drives turns.
I want to attach the blue sled on the blue chain, the red sled on the red chain and then rotate the yellow sprocket so both of the sleds moves with their chains (at the same speed/ time).
The blue sled is going to move a rolled bar (the orange one) on the floor (glass square) a certain length and then the red sled is going to "take over" and continue to move the bar on the floor.
I want to make sure I´ve got the spacing between the sprockets in the short chain drive (red) correct so the red sled takes over when the blue sled disappears under the floor.
[URL].....
[URL].....
[URL].......
[URL].......
Edit: I use IV 2012, but I also downloaded IV 2013 professional (trial) so I can use the dynamic motion.
I noticed when creating assemblies, applying a positional constraint, the parts don't move. In order to get the parts to "move" to their constrained position I have to try and drag them with the mouse then they snap into place. Also updating the assembly works as well.
What setting could I have changed so that once I press apply on a constraint it moves the part immediately?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
We are having an issue when we replace a component in Inventor Pro 2012. When we replace a component, the name in the browser does not update to the new component. We've even tried to close and re-open the Inventor assembly and that does not work. We end up manual double clicking the name in the browser and type in the new component name.
Inventor Product Design Suite Ultimate 2012
Dell Precision T7500 Workstation
Xeon Processor
16 GB of RAM
Nvidia Quadro FX 5800
Windows 7 x64